Hi, I got Echolink EL3020 IR Plus, with ABRACADABRA smart card
I Dont know how to upgrade the software
can any one help me please
Thanks
I had this issue initially used a usb to rs232 changed com1 port to com4 in the upgrade program clicked connect, switched the receiver off and on and all worked. make sure you have correct drivers for the rs232 bit as I had to install these as well "FDTI usb serial converter drivers"
to everyone trying to upgrade their echolink with usb to serial adapters, please note that you will continue to get error messages because i believe that it was not designed to work like that, try and use a desktop with a real com port or use any of those old laptops with a real com connection. echolink from my experience will not work with any virtual com port created from a usb to serial cable/adapetr.
you might want to check the configuration for your cable as 5-5, 2-3 and 3-2, if you can get the connectors, soldiering the cables will not be a problem for you.
I have a 3020IR and I am upgrading using a laptop, with USB-RS232 adapter. Works perfect.
I have a 3020IR and I am upgrading using a laptop, with USB-RS232 adapter. Works perfect.
you might want to check the configuration for your cable as 5-5, 2-3 and 3-2, if you can get the connectors, soldiering the cables will not be a problem for you.
I have a 3020IR and I am upgrading using a laptop, with USB-RS232 adapter. Works perfect.