tamicia
Registered
- Messages
- 46
not even using the rear oneJust out of interest have you tried the usb slot in the back instead of the front one?
not even using the rear oneJust out of interest have you tried the usb slot in the back instead of the front one?
You do realize the restore can take upto 20 mins? You dont see anything happening until it starts to rebootto attempt the restore I always start from the openblackhole image in slot2, turn off the decoder and then attempt the restore using the atv73 restore image.
As said up to now, unfortunately I can no longer restore because the 4 images remain unchanged but there is a detail: after failure to restore the decoder does not start on the last used image (OBH) but rather on the ATV73 image that I have in the slot 1.
I'll give it up for tonight.
Thanks again for your help, have a good evening everyone
If I try with the boot method (e2upd), holding the power button, the decoder restarts in 1 minute without having reset anything.You do realize the restore can take upto 20 mins? You dont see anything happening until it starts to reboot
Maybe try a different recovery image from another group. Or use the ATV 6.4 recovery image.If I try with the boot method (e2upd), holding the power button, the decoder restarts in 1 minute without having reset anything.
If I try to restore using the boot menu the decoder restarts and remains on boot (as you say) for about 15-20 minutes... but nothing changes, the 4 images remain unchanged, nothing is restored.
I waited 20 minutes several times without getting the restore...
Surely if he was Italian he would be called Furetto ?ok, now I'll try with 6.4.
Meanwhile, could you tell me the recommended properties for the USB stick (even though mine have always worked well until 2 days ago...)?
For example: logical or primary partition? Cluster size etc.
Thanks Ferret!
PS: are you Italian?
I asked because I knew an Italian moderator with the same nickname as herSurely if he was Italian he would be called Furetto ?
What do you want to do with the box, i change my images every other day why not try something new Why do you need need to flash android if you have done it recently. If your android is on android software version 5 then just flash 1.04 special and do a reset and then flash 1.07.This time it worked! The flash took 5 minutes, now I can switch from android to slot1 atv .
A thousand thanks! cleaned all the slots. What do you recommend me to do now? Can I insert my 4 backups into the 4 slots or, while I'm at it, do you recommend flashing Android too?
@Ferret your now a femaleI asked because I knew an Italian moderator with the same nickname as her
What about 7.4 have you tried that.I also tried with the latest recovery version of atv7.3. I can also restore with this. Evidently the problem was the partition set to logical rather than primary
ninth, I leave the 5.00, I don't need the specialWhat do you want to do with the box, i change my images every other day why not try something new Why do you need need to flash android if you have done it recently. If your android is on android software version 5 then just flash 1.04 special and do a reset and then flash 1.07.
What about 7.4 have you tried that.
Yes, I tried 7.4 1 month ago, I don't find any differences.What about 7.4 have you tried that.
apart from the compatibility for accessing the "forever" server, are there any other advantages/fixes/improvements compared to the official version 5.00?If your android is on android software version 5 then just flash 1.04 special and do a reset and then flash 1.07.
Well there are some images you mention that i have not tried yet.apart from the compatibility for accessing the "forever" server, are there any other advantages/fixes/improvements compared to the official version 5.00?
Anyway, a few days ago I tried to update via the Android menu and the 1.06 update appeared, I don't know why, I have 5.00