How to get PowerVu AutoRoll working with Oscam and Dreambox

[mileta5]

science europe

i have problem with channel science europe with serbian subtitle pid 3840 on 4.8E

i put correct key 00 and 01 but channel not work
pids 3850 and 3860 work correct with same key

what is problem i use oscam -emu r11272

 

[dray1]

hi , try to change 3840 to 0384 on both keys 00 , 01 and then restart your oscam .

probably you got another pid 3840 on your softcam.key file that creates the problem .

 

[[email protected]]

hello I have a problem with autoroll SIS on 4.8E. Which channel should be tuned to get EMM? Thank you

 

[cyberworld23]

HBO on Intelsat 20 68.5E

Is it this key still valid :
P 431D3E 0A1F1AA3A07227 ; EMM Key Valid

I've tried it but no luck and for the other keys for another satellite working fine

 

[leien]

Thank you！I was successful！

 

[frankviana]

Where I see the new keys (softcam.key) and if AU is working? For tests, If I change 00 or 01 ECM key, appear black screen (after restart oscam)

My configuration:

OSCAM.CFG

[global]
#logfile = /usr/log/oscam.log
logfile = stdout
initial_debuglevel = 64
nice = -1
preferlocalcards = 1

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

OSCAM.SERVER

[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

[reader]
label = SoftCam.Key
protocol = constcw
device = /usr/keys/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 2

OSCAM.USER

[account]
description = dvbapi
user = linuxsatsupport
group = 1,2,3,4,5,6,7,8,9,10
keepalive = 1
au = 1

SOFTCAM.Key

P 28B0 00 XXXXXXXXXXXXXX ; ECM Key CHANNEL HD
P 28B0 01 XXXXXXXXXXXXXX ; ECM Key CHANNEL HD
P 28B0 XXXXXXXX 7XXXXXXXXE995 ; EMM Key CHANNEL HD

LOG (SHORT):
**** OSCam << cardserver log switched, version 1.20-unstable_svn, build r11272 (mipsel-openpli40-linux-gnu-ssl-libusb-pcsc)
2016/08/31 17:59:28 00000000 s debug_level=64
2016/08/31 17:59:28 00000000 s (main) Host name = dm800se
2016/08/31 17:59:28 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 18671
2016/08/31 17:59:28 00000000 s [Emu] oscam-emu version 731
2016/08/31 17:59:28 00000000 s (config) 221 service-id's loaded in 5 ms
2016/08/31 17:59:28 00000000 s (reader) emulator [emu] creating thread for device emulator
2016/08/31 17:59:28 40F85CE9 p (reader) SoftCam.Key [constcw] proxy initialized, server /etc/tuxbox/config/SoftCam.Key:0
2016/08/31 17:59:28 00000000 [Emu] info: FFDecsa parallel mode = 64
2016/08/31 17:59:30 68EB2E98 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/08/31 17:59:30 68EB2E98 r [Emu] reading key file: /var/keys/Softcam.Key
2016/08/31 17:59:31 00000000 s (main) init for all local cards done
2016/08/31 17:59:31 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2016/08/31 17:59:31 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2016/08/31 17:59:31 00000000 s (anticasc) anti cascading disabled
2016/08/31 17:59:31 22F68954 c (client) plain dvbapi-client granted (linuxsatsupport, au=auto (6 reader))
2016/08/31 17:59:31 22F68954 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2016/08/31 17:59:31 22F68954 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2016/08/31 17:59:33 22F68954 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1774 PROVID: 000000
2016/08/31 17:59:33 22F68954 c (dvbapi) Demuxer 0 found 1 ECMpids and 5 STREAMpids in caPMT
2016/08/31 17:59:33 22F68954 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2016/08/31 17:59:33 22F68954 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1774 ANY CHID PMTPID 1609 VPID 019A
2016/08/31 17:59:34 22F68954 c (dvbapi) Demuxer 0 found 1 ECMpids and 5 STREAMpids in PMT
2016/08/31 17:59:34 22F68954 c (ecm) linuxsatsupport (0E00@000000/0000/0281/40:BC0CD11BA0E99D57043103BCE6D7DBBE): found (5 ms) by emulator (L/1/5/5) - xxx-HD
2016/08/31 17:59:34 22F68954 c (ecm) linuxsatsupport (0E00@000000/0000/0281/40:B9447789ABC1397A8267740FEA403E7E): found (69 ms) by emulator (L/1/5/5) - xxx-HD
2016/08/31 17:59:54 22F68954 c (reader) emulator [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND!
2016/08/31 17:59:54 22F68954 c (ecm) linuxsatsupport (0E00@000000/0000/0281/40:0E79C77FC7DD4FD36D5CD850B333A952): found (7 ms) by emulator (L/1/5/5) - xxx-HD
2016/08/31 18:01:55 22F68954 c (reader) emulator [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND!
2016/08/31 18:01:55 22F68954 c (ecm) linuxsatsupport (0E00@000000/0000/0281/40:B4C2EA6ACAD3B64BAB6C4FDFD02C036B): found (7 ms) by emulator (L/1/5/5) - xxx-HD
2016/08/31 18:01:56 22F68954 c (ecm) linuxsatsupport (0E00@000000/0000/0281/40:7C8CB341F81433C53A1F410627031EBC): found (4 ms) by emulator (L/1/5/5) - xxx-HD

Thanks

 

[kebien]

This line
2016/08/31 18:01:55 22F68954 c (reader) emulator [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND!
says autoroll is working.

Now,if you are using latest oscam build you need to format the keys a bit different.

The ECM keys.....you need to assign a group
P 0128B0 00 XXXXXXXXXXXXXX ; ECM Key CHANNEL HD
P 0128B0 01 XXXXXXXXXXXXXX ; ECM Key CHANNEL HD

Then use the same group for the EMM key
P 01 XXXXXXXX 7XXXXXXXXE995 ; EMM Key CHANNEL HD

No need for the channel ID,just the group id

For other trasponders,use a different ID every time,like 02 or 0003 (can be also 4 digits ), or 1234.
Do not repeat group ID

 

[nautilus7]

Is this line:

emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

necessary in the emulator reader for the AU to work?

 

[frankviana]

This line
2016/08/31 18:01:55 22F68954 c (reader) emulator [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND!
says autoroll is working.

Now,if you are using latest oscam build you need to format the keys a bit different.

The ECM keys.....you need to assign a group
P 0128B0 00 XXXXXXXXXXXXXX ; ECM Key CHANNEL HD
P 0128B0 01 XXXXXXXXXXXXXX ; ECM Key CHANNEL HD

Then use the same group for the EMM key
P 01 XXXXXXXX 7XXXXXXXXE995 ; EMM Key CHANNEL HD

No need for the channel ID,just the group id

For other trasponders,use a different ID every time,like 02 or 0003 (can be also 4 digits ), or 1234.
Do not repeat group ID

Changed this softcam file, but don't work. I'm using version 11272

See the loop message:

2016/08/31 21:31:38 0E5AC02B r [Emu] Key not found: P 0281 01
2016/08/31 21:31:38 0E5AC02B r [Emu] ECM failed: Key not found
2016/08/31 21:31:38 79079361 p (constcw) ERROR: Can't open /usr/keys/SoftCam.Key (errno=2 No such file or directory)
2016/08/31 21:31:38 306FC538 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 0281 ECMPID 1774 PMTPID 1609 VPID 019A
2016/08/31 21:31:38 2A51473D p (constcw) ERROR: Can't open /usr/keys/oscam.keys (errno=2 No such file or directory)
2016/08/31 21:31:38 06A751DE p (constcw) ERROR: Can't open /usr/keys/oscam.constant.cw (errno=2 No such file or directory)
2016/08/31 21:31:38 0774CB19 c (ecm) linuxsatsupport (0E00@000000/0000/0281/40:5215586AF21B13FE812937F103FFF16D): rejected reader sid (10 ms) by oscam.constant.cw (F/5/5/5) - xxxx-HD
2016/08/31 21:31:39 0774CB19 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/08/31 21:31:39 0774CB19 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1774 ANY CHID PMTPID 1609 VPID 019A

And: Another channel (same transponder): SID: 0281

My softcam example working fine:

P 012810 00 LGXXXXXXXXXXB2 ; ECM CHANNEL 2
;
P 012810 01 78XXXXXXXXXX87 ; ECM CHANNEL 2
;
P 01 00XXXXX5 XXXXXXXXXXXX45 ; EMM Key CHANNEL 2

But if I change, appear black screen:

P 012810 00 81XXXXXXXXXXc9 ; ECM CHANNEL 2
;
P 012810 01 44XXXXXXXXXX75 ; ECM CHANNEL 2
;
P 01 00XXXXX5 XXXXXXXXXXXX45 ; EMM Key CHANNEL 2

P 012810 01 (OK, WORKING)
P 010281 01 (WRONG FORMAT, RIGHT?)

What's wrong? Key don't change and black screen after restart oscam

Thanks

 

[Peerate]

Is this line:

emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

necessary in the emulator reader for the AU to work?

No it's not necessary, you can leave it that way.

My auproviders are same as yours and au works on sis 4.8e, 1w, and 16e snai.

 

[kebien]

Changed this softcam file, but don't work. I'm using version 11272

See the loop message:

2016/08/31 21:31:38 0E5AC02B r [Emu] Key not found: P 0281 01
2016/08/31 21:31:38 0E5AC02B r [Emu] ECM failed: Key not found
2016/08/31 21:31:38 79079361 p (constcw) ERROR: Can't open /usr/keys/SoftCam.Key (errno=2 No such file or directory)
2016/08/31 21:31:38 306FC538 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 0281 ECMPID 1774 PMTPID 1609 VPID 019A
2016/08/31 21:31:38 2A51473D p (constcw) ERROR: Can't open /usr/keys/oscam.keys (errno=2 No such file or directory)
2016/08/31 21:31:38 06A751DE p (constcw) ERROR: Can't open /usr/keys/oscam.constant.cw (errno=2 No such file or directory)
2016/08/31 21:31:38 0774CB19 c (ecm) linuxsatsupport (0E00@000000/0000/0281/40:5215586AF21B13FE812937F103FFF16D): rejected reader sid (10 ms) by oscam.constant.cw (F/5/5/5) - xxxx-HD
2016/08/31 21:31:39 0774CB19 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/08/31 21:31:39 0774CB19 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1774 ANY CHID PMTPID 1609 VPID 019A

And: Another channel (same transponder): SID: 0281

My softcam example working fine:

P 012810 00 LGXXXXXXXXXXB2 ; ECM CHANNEL 2
;
P 012810 01 78XXXXXXXXXX87 ; ECM CHANNEL 2
;
P 01 00XXXXX5 XXXXXXXXXXXX45 ; EMM Key CHANNEL 2

But if I change, appear black screen:

P 012810 00 81XXXXXXXXXXc9 ; ECM CHANNEL 2
;
P 012810 01 44XXXXXXXXXX75 ; ECM CHANNEL 2
;
P 01 00XXXXX5 XXXXXXXXXXXX45 ; EMM Key CHANNEL 2

P 012810 01 (OK, WORKING)
P 010281 01 (WRONG FORMAT, RIGHT?)

What's wrong? Key don't change and black screen after restart oscam

Thanks

this line
2016/08/31 21:31:38 79079361 p (constcw) ERROR: Can't open /usr/keys/SoftCam.Key (errno=2 No such file or directory)

says softcam.key file is not in usr/keys/softcam.key
make sure the file is where it suppose to be
Your fist log show
2016/08/31 17:59:30 68EB2E98 r [Emu] reading key file: /var/keys/Softcam.Key
So,you have problems with the softcam.key location or with the symlink (/var/keys/SoftCam.Key > /usr/keys/SoftCam.Key )
You can also change the link in the emulator configuration

 

[frankviana]

this line
2016/08/31 21:31:38 79079361 p (constcw) ERROR: Can't open /usr/keys/SoftCam.Key (errno=2 No such file or directory)

says softcam.key file is not in usr/keys/softcam.key
make sure the file is where it suppose to be
Your fist log show
2016/08/31 17:59:30 68EB2E98 r [Emu] reading key file: /var/keys/Softcam.Key
So,you have problems with the softcam.key location or with the symlink (/var/keys/SoftCam.Key > /usr/keys/SoftCam.Key )
You can also change the link in the emulator configuration

I have the same file: /etc/tuxbox/config/softcam.key and /usr/keys/softcam.key and Openpli show the symink:var>usr

Thx.

 

[kebien]

Oscam as you posted the log,cannot see the SoftCam.Key file.
Remember in unix the file name matters.
make sure you use capital S and capital C in SoftCam.Key

Also,make sure the file is unix.
You can use telnet
change to the directory where softcam file is
cd /usr/keys/
then use cmd
dos2unix SoftCam.Key
In order to make sure is unix compliant.
This happen sometimes if you use windows to edit the file.

frankviana
(need a favor from you:can you check SES6 4070mhz and 3752mhz muxes still there?....I lost this 2 in the past few days.but I see no reports from other people...or if they moved to other frequency or sat)

 

[frankviana]

Oscam as you posted the log,cannot see the SoftCam.Key file.
Remember in unix the file name matters.
make sure you use capital S and capital C in SoftCam.Key

Also,make sure the file is unix.
You can use telnet
change to the directory where softcam file is
cd /usr/keys/
then use cmd
dos2unix SoftCam.Key
In order to make sure is unix compliant.
This happen sometimes if you use windows to edit the file.

frankviana
(need a favor from you:can you check SES6 4070mhz and 3752mhz muxes still there?....I lost this 2 in the past few days.but I see no reports from other people...or if they moved to other frequency or sat)

Now, appear only this error:

2016/09/01 12:09:12 751BC412 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 02D1 ECMPID 177C PMTPID 1659 VPID 03F2
2016/09/01 12:09:12 1963C8ED c (-) -- Skipped 3 duplicated log lines --
2016/09/01 12:09:12 1963C8ED c (ecm) linuxsatsupport (0E00@000000/0000/02D1/40:E405C7460BA6DCF2967BA80EBEA5088D): rejected reader sid (6 ms) by oscam.keys (F/5/5/5) - CHANNEL TEST HD
2016/09/01 12:09:12 1963C8ED c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/09/01 12:09:12 1963C8ED c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177C ANY CHID PMTPID 1659 VPID 03F2
2016/09/01 12:09:13 2530DF99 r [Emu] Key not found: P 02D1 01
2016/09/01 12:09:13 2530DF99 r [Emu] ECM failed: Key not found
2016/09/01 12:09:13 751BC412 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 02D1 ECMPID 177C PMTPID 1659 VPID 03F2
2016/09/01 12:09:13 1963C8ED c (-) -- Skipped 3 duplicated log lines --
2016/09/01 12:09:13 1963C8ED c (ecm) linuxsatsupport (0E00@000000/0000/02D1/40:02D290D34EDDFCCDBF910F29B2A25A23): rejected reader sid (7 ms) by constant.cw (F/5/5/5) - CHANNEL TEST HD
2016/09/01 12:09:13 1963C8ED c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/09/01 12:09:13 1963C8ED c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177C ANY CHID PMTPID 1659 VPID 03F2
2016/09/01 12:09:14 2530DF99 r [Emu] Key not found: P 02D1 01
2016/09/01 12:09:14 2530DF99 r [Emu] ECM failed: Key not found
2016/09/01 12:09:14 751BC412 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 02D1 ECMPID 177C PMTPID 1659 VPID 03F2
2016/09/01 12:09:14 1963C8ED c (-) -- Skipped 3 duplicated log lines --
2016/09/01 12:09:14 1963C8ED c (ecm) linuxsatsupport (0E00@000000/0000/02D1/40A6FEC0B57E40EB0F4B36E59C136773B): rejected reader sid (8 ms) by oscam.constant.cw (F/5/5/5) - CHANNEL TEST HD
2016/09/01 12:09:14 1963C8ED c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2016/09/01 12:09:14 1963C8ED c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177C ANY CHID PMTPID 1659 VPID 03F2
2016/09/01 12:09:15 2530DF99 r [Emu] Key not found: P 02D1 01
2016/09/01 12:09:15 2530DF99 r [Emu] ECM failed: Key not found
2016/09/01 12:09:15 751BC412 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 02D1 ECMPID 177C PMTPID 1659 VPID 03F2
2016/09/01 12:09:15 1963C8ED c (-) -- Skipped 3 duplicated log lines --
2016/09/01 12:09:15 1963C8ED c (ecm) linuxsatsupport (0E00@000000/0000/02D1/40:5DBBFCFC984A64606F0D608CA2B7C014): rejected reader sid (11 ms) by constant.cw (F/5/5/5) - CHANNEL TEST HD
2016/09/01 12:09:15 1963C8ED c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/09/01 12:09:15 1963C8ED c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177C ANY CHID PMTPID 1659 VPID 03F2
2016/09/01 12:09:16 2530DF99 r [Emu] Key not found: P 02D1 01
2016/09/01 12:09:16 2530DF99 r [Emu] ECM failed: Key not found
2016/09/01 12:09:16 751BC412 p (constcw) Searching CW for CAID 0E00 PROVID 000000 SRVID 02D1 ECMPID 177C PMTPID 1659 VPID 03F2
2016/09/01 12:09:16 1963C8ED c (-) -- Skipped 3 duplicated log lines --
2016/09/01 12:09:16 1963C8ED c (ecm) linuxsatsupport (0E00@000000/0000/02D1/40:855EAD87D13371495E876BF7D8DC5448): rejected reader sid (11 ms) by SoftCam.Key (F/5/5/5) - CHANNEL TEST HD
2016/09/01 12:09:16 1963C8ED c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!
2016/09/01 12:09:16 1963C8ED c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177C ANY CHID PMTPID 1659 VPID 03F2
2016/09/01 12:09:17 2530DF99 r [Emu] Key not found: P 02D1 01
2016/09/01 12:09:17 2530DF99 r [Emu] ECM failed: Key not found

And about 4070 and 3752, I need to check with my dish... but this site show OK: http://www.portaleds.com/satelites/listar.php?sat=3195

Today, I'll check the signal for you.

Thanks

 

[kebien]

frankviana
This new log show channel
2016/09/01 12:09:17 2530DF99 r [Emu] Key not found: P 02D1 01
Is not the channel key you posted before.
If it uses the same key as the 0281,you must make an entry for
P 0102D1 00 KKKKKKK.....

 

[frankviana]

frankviana
This new log show channel
2016/09/01 12:09:17 2530DF99 r [Emu] Key not found: P 02D1 01
Is not the channel key you posted before.
If it uses the same key as the 0281,you must make an entry for
P 0102D1 00 KKKKKKK.....

There are same key for different channels and diffrents sids too for 1 transponder. Not same key posted before because I'm Testing which channels work AU when I change manually.

Thanks.

 

[frankviana]

I have a softcam with 6 channels: 6 lines 00, same key and different Sid and 6 lines 01, same key and different Sid and 1 emm key using group ID.

 

[antrabe]

im experience some trouble when i installed oscam i get powervu on my dm7080 but when i change to other system the screen is bkack i mean or wors powervy or works the other systems not the 2 at the same time

 

[vladan !!]

what that mean ?
its from 4.8 E
sis

2016/09/14 16:29:33 1BC84666 c (reader) oscam_emu [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND!

 

[olami]

tks

greeting sat-universe i need a help complete dm enigma2 auto roll config folder. i got none auto roll working but still never the auto roll working. my version of oscam is 11209 pls help