Complete guide for installation of latest images,latest drivers and latest Barry allen on dm800 clones

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,923
Hi mate

You have to use the bootloader your 800 has because it is a clone. If you use images that were not packed with the 72 bootloader your clone has then it lock your 800 and it wont boot.

The guide at the start of this thread describes a work around to run images that were made with bootloaders after 72.

You other option if you want a easy life is to flash image that were made with the 72 bootloader your clone has. Or load a image that is already patched see here

http://www.sat-universe.com/showthread.php?t=142424

Again choose the correct image for your bootloader.

Ferret
 

dktn

Senior Member
Messages
300
Sorry my English. i do not understand so I ask some questions :
For example I choice firmware that has patched for Bl72 so it necessary chose file "bootloader 72.nfi" again ?
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,923
Hi mate

You did not mention the firmware was a patched version.

If this is the case all you do is load the firmware no need to install bootloader or driver as it is already patched.

Ferret
 

mfaraj57

Super VIP
Messages
825
Hi
Better not to use tutorial above to install the recent driver(it was written before the recent patched images appear and it is not for beginners)
 
Last edited:

dktn

Senior Member
Messages
300
I am a newbe. So the best way to update firmware now. Following MR Ferret i use firmware patched for bl72 i do not need choice bl72.nfi,if firmware from original. firmware i must choice bl72 then replace 2 files. Is that right ? Please show me what to do now.
 

dktn

Senior Member
Messages
300
Hi all
because my english not good so i can show step by step please check my mistake:
option 1( follow MR Ferre):
- boot DM and update over brower file Pli jade 3.nfi for BL 72 Following link http://www.sat-universe.com/showthread.php?t=142424 then reboot update driver file dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20091014-r0_dm800.ipk and replace 2 file. finish
Option 2: (following MR mfaraj57)

- boot DM800 then chose file OoZooN-CVS-lean-dm800-20091017_BL70_patched by jams01 update then not reboot chose BL72.nfi then Configure OoZooN image and Install Barryallen 5.0.15 patched reboot after that brower file Pli jade 3.nfi then reboot update driver file dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20091014-r0_dm800.ipk and replace 2 file
 

dktn

Senior Member
Messages
300
hi Ferret
I have downloaded it. Iask you step by step i will do it:
- reboot DM and hold power button, on screen opear "Stop" and IP. use firefox enter IP. chose file "NabiloBlackHole-11-BL72-dreamboxclones.co.cc.nfi" click "Flash" after run 100% complet I reboot DM. That all?
Do I need install driver for DM? for example file"dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm800-20091014-r0_dm800.ipk". please tell me!
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,923
No you do not need to install any drivers after you flash!

The image you flashed is patched with hacked drivers for clones the best ones to have.

Ferret
 

jeriko

Registered
Messages
46
Hello to evryone on forum here !!!!!
I'm new or actually i never did post before !!
so HELLO to YOU

Well i had no problem so far i run flash image (nabilo 0.12 on clone sec stage 72 )

My problem start when i try to install barryallen for clone 5.0.15 on Nabilo (i did not know was gone be a problem with Nabilo image in flash) !!
it is installed but i do not have in menu (apper) and i do not manage to remove !!! if i do by telenet
ipkg remove enigma2-plugin-extensions-barryallen

then it say no packeage removed nothing to be done !!!

How can i remove it ????
probably i should resend secondstage 74 or 75 , then look if apper in the menu and then do some change in some file (i do not know where ), for then resend secondstage 72 ???

Nedd help for solve this !!!

Tanks in advance

:thum:
 

jeriko

Registered
Messages
46
THIS IS WHAT I GET

Installing enigma2-plugin-extensions-barryallen (5.0.15) to root...

================================================================

It's a Dream !

Par Mek lol

================================================================

Your Flash image Kernel now HAS to include the USB drivers
or Barry Allen will not even install anymore !
================================================================
now checking if image in Flash uses latest secondstage loader ...
================================================================

!!!!!! LAST WARNING !!!!!!

================================================================
Barry Allen pour les Dream clones
juste l'installer sans la mise a jour de second stage
apres un reboot on a la nouvelle version de BA
Modifie et teste par Mek

Extraction des fichiers - Attendez SVP
================================================================

Looks like this image doesn't have an USB enabled Kernel (yet)

I'm sorry, Barry Allen will NOT install in this image !
================================================================
preinst script returned status 1

An error ocurred, return value: 1.

Collected errors:
Aborting installation of enigma2-plugin-extensions-barryallen




And now i do not Know how remove it !!!
 

jeriko

Registered
Messages
46
solved did manage to remove it !!!
:)

And did install with sucsess version 5.0.10 !!!!!!!!

TANKS anyway


:D :D :D :D
 

mfaraj57

Super VIP
Messages
825
solved did manage to remove it !!!
:)

And did install with sucsess version 5.0.10 !!!!!!!!

TANKS anyway


:D :D :D :D

Hi
Nabilo 12 does not accept Barry allen 5.0.10
How did you install it
Recent patched version of Barry allen only installed without problems while lean ozoon in flash
thanks
 

jeriko

Registered
Messages
46
well i managed !!
i use 5.0.10M for clone version !!!

nabilo 012 in flash
i'm testing now then i will say if all 100% ok

:D
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,923
well i managed !!
i use 5.0.10M for clone version !!!

nabilo 012 in flash
i'm testing now then i will say if all 100% ok

:D

Hi mate

Could you give us the install procedure you used for Barry Allen on Nab12?

Ferret
 

jeriko

Registered
Messages
46
Finally after 2 day of trying barryallen and one week of fresh owner dm 800 clone (i must say works very beautifull this clone, they chinese relly did a great jobb)

Well i manage to have nabilio 0.12 in flash and install barry allenn !!!!
(DM 800HD PVR clone HARDISK SATA 320 intern and USB 520 mb
Nabilo 0.12 in flash second stage 72r )

after several attempt and and several distribusion of Barry A. like you all, have experience no barry allen after restart dreambox in menu
i was giving up to have barry a. with nabilo 0.12 in flash !

But then i did this solution
My clone is 72 stage loader
so i did install Barry Allen (version 4.8.14 by GUTEMINE) the same way like you have describe with DCC (copy in TMP and then Telenet )
All went very smoth without any error , barry hallen even check for secondstage loder and said ok !!!!!!!! (that's why version 4.8.14)

Then i did some tougth !!
for make it short i just ftp where media/ba install the driver and just change the attribute 444 (just read)
the folder DEV/SCSI/HOST0/BUS0/TARGET0/LUN0/PART1 (change attribute just SCSI folder and the folder after)
i change the attribute to 444 (just read)

Then i install Gemini4.4 with DCC in multiboot (offcourse) use Barry allen menu in DCC for install the image)
and then i restart

AND FYNALLY GOT BARRYALLEN MENU AFTER RESTART DFREAMBOX !!!!
(did the restart 3 time to be sure at it stay there!!and b.a was there)




:clapping: :clapping: :clapping: :clapping:


PS Tomarrow i try to uppdate barry allen from barry allen menu
(with secondstage trick)
Now i leave it like this just enjoy !!!
tyred




:thum:
 
Last edited:

lorept

Registered
Messages
38
for me almost everything works ok but i have a small problem : i like nabilo images nad they start to suport DVB subtitles from nabilo 0.11 with BL73 .My clone is BL72 and i cant see the subtitles after i replace the drivers , can anybody help with this?
Thanks
 

Quickduck

Registered
Messages
2
hello,
i'm new to this forum.
I'm also new with dreambox 800HD clone.
I tried to install BA 5.0.15 patched with DCC and telnet, with a nabilo O.12 in flash. it gave me the same error as lorept twice. but then i tried again, it worked. Now i have Ba in the menu .
I cannot understand how it worked, but it works !!!!
Thanks again...
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,923
hello,
i'm new to this forum.
I'm also new with dreambox 800HD clone.
I tried to install BA 5.0.15 patched with DCC and telnet, with a nabilo O.12 in flash. it gave me the same error as lorept twice. but then i tried again, it worked. Now i have Ba in the menu .
I cannot understand how it worked, but it works !!!!
Thanks again...

Can you tell me after a reboot was Barry Allen still in the plugin menu and do you have the red barry allen boot screen to pick which image to boot at startup.

Ive tried this and am unable to replicate your results not working for me.

Ferret
 
Top