Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

007.4 said:

Brilliant!
That fixed the pixellation/freezing on my ARM based Ultimo4K.

I edited the file /etc/sysctl.conf to add these lines

Code:

## added for Abertis ###
net.core.rmem_default = 16777216
net.core.rmem_max = 16777216
net.core.wmem_default = 16777216
net.core.wmem_max = 16777216
net.ipv4.udp_mem = 8388608 12582912 16777216
net.ipv4.tcp_rmem = 4096 87380 8388608
net.ipv4.tcp_wmem = 4096 65536 8388608
net.ipv4.tcp_tw_recycle = 0

Then in telnet, to apply the changes I ran

Code:

systcl -p

After a short period of stabalization the picture is now perfect.

Click to expand...

weber64 said:

Hello, I tried to copy and paste in oscam config softcam Enigma1969, then I also tried to copy paste in the softcam of the oscam but the frequency to 30 west 12548 V 29600 does not enter despite the signal is excellent

Click to expand...

/
0ce4b104:ea67:0000
s 12548000:29600000:1:3:-300:2:0:1:2:2:2
/

06a5:0ce4b104:ea67:0000:1:0
Abertis PID 701
p:ABERTIS,c:031fff,c:1502bd,C:2600,f:01
06a6:0ce4b104:ea67:0000:1:0
Abertis PID 702
p:ABERTIS,c:031fff,c:1502be,C:2600,f:01
06a7:0ce4b104:ea67:0000:1:0
Abertis PID 703
p:ABERTIS,c:031fff,c:1502bf,C:2600,f:01

Click to expand...

raul1966 said:

is it possible to receive Abertis with vu + ultimo 4k and openatv 6.3?help:mecry:

Click to expand...

Rickk said:

appears abertis 701 - 703 in the transponder list
if not, enigma stop with the console init 5
insert the below to lamedb
to send to the box with ftp lamedb
start enigma init 3
restart box

Click to expand...

Rickk said:

you can only try

Click to expand...

otokoc said:

hi rickk abertis working with oe2.5 images?thanks

Click to expand...

Rickk said:

How To Do Abertis 30°W

Since there are still questions about Abertis, I have created a How to Do with all the necessary files and an illustrated step-by-step guide

Good luck :thum:

Click to expand...

Point 6 is not clear to me.
Do I have to open the file lamedb that you have attached to it and the content I have to paste at the end of my lamedb of the setting that I have in my decoder?

Click to expand...

We don't need oscam for this ?

Click to expand...

astra.mips is empty

Click to expand...

mouadhada said:

Thx a lot for this guide. I will try it in openatv on dm920.
Hope that it works.

Click to expand...