Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

mahmoud_a1

Senior Member
Messages
470
Abertis DTT ; Hispasat 1C/1D/1E @ 30° West

11222 , 11262 , 11302 H and 12631 , 12671 v 30000

11653 , 11677 H 19680 , 12523 V 10400 and 12548 V 29600

Channels when search i have data only i need vpid and pid for channels

i get crypt8 and keys but i dont know info. about vpid and pid for all

channels for try keys

Ma7mOuD :)
 
Last edited:

AZPower

Senior Member
Messages
101
Abertis use full transponder scrambling.
You have to decode biss data stream and use
ts analyzer tool to see what is inside.
 

xosef1234

Senior Member
Messages
107
Hi mahmoud_a1,

have you been successful?
I was searching for any news on Abertis DTT but it seems that nobody is interested in.
I would appreciate if you could share with us.

Thx
 

xosef1234

Senior Member
Messages
107
Thx
I was already aware of colibris great work.
However, I am interested if mahmoud_a1 found all cw's since colibri did not work on all transponders as far as I understood.

What about implementation in a linux receiver?
 

xosef1234

Senior Member
Messages
107
Does anybody have the cw's for the channels?

I have the following crypt8 B8hx00h(4 from colibri, thx):
Crypt8: 9C F0 C3 3D 33 E0 E4 19
Crypt8: E2 83 43 0F CA 6E E7 19
Crypt8: 64 DD 5A 55 6A 06 50 31
Crypt8: 72 83 8C 78 4F 2F B2 E7

And further these:

Crypt8: C7 7C 5A B6 FC E3 2C 58
Crypt8: 29 20 DE FB DD F8 73 C6
Crypt8: 8F 31 D6 A0 66 08 26 11
Crypt8: 32 6D 1F CA CD 31 68 97

Thx
 

dxellas

Registered
Messages
49
Hello,

Would anybody be so kind to tell me if nowadays it is still possible to watch them ?
 

Lexzie

Senior Member
Messages
189
I found keys for this somewhere, but cannot test it because I don't know what the VPID's and APID's should be and how to add these to the scanned SID's.
I use a Enigma2-tuner (Xtrend ET10000).

Anyone knows how?
 

dxn

Senior Member
Messages
276
I found keys for this somewhere, but cannot test it because I don't know what the VPID's and APID's should be and how to add these to the scanned SID's.
I use a Enigma2-tuner (Xtrend ET10000).

Anyone knows how?

Probably you have the keys that are public, but they are not valid.

The real keys are not public, only a have them and don't want to share it.

There is already a public study elsewhere on how to receive these channels in a linux receiver like dreambox or VU with dedicated image like SatDreamGR or latest Open ATV 6.0 but without activ keys it's useless.
 
Last edited:

dale_para_bajo

Well Known Member
Messages
646
What is the frequency of the transponder?
I will like to see some log in this transponder.

Please use TSreader2, and make a small log, Upload to a none password share like _www.fileconvoy.com or _www.zippyshare.com and place the link here. Lets see the difference with T2-MI or if it is the same. Please keep posting in this thread as it was direct towards this transponder.
 

dvlajkovic

Well Known Member
Messages
502
What is the frequency of the transponder?
I will like to see some log in this transponder.

Please use TSreader2, and make a small log, Upload to a none password share like _www.fileconvoy.com or _www.zippyshare.com and place the link here. Lets see the difference with T2-MI or if it is the same. Please keep posting in this thread as it was direct towards this transponder.

Here you go. All info is inside > LINK.
 

dale_para_bajo

Well Known Member
Messages
646
@dvlajkovic

Thanks but it seems that is another transponder for Europe only.
And as it seems bis encrypted I will postpone this project to after I finish with T2MI. As i do not have a simple tool to do the Biss decryption of a single PID. That is not hard, but I need to create the tool.

One thing is not clear, after decryption will T2MI be use for unpack or what else? I read the post offered previously, but it only said "Similar to T2MI" It did not said it is in fact T2MI.
 

Serjoga

Latvian satfan
Staff member
Moderator
Messages
6,101
E2 boxes found this channels, but you not found this channels in sat list. You need open DreamboxEdit, found this channels, move to one or other bouquets and reload settings.

9605c7dadf47dc3b36e60c84837f7c88.jpg


d4a95c784e2869de1d0b24e1b391b360.png
 
Top