masrawysat
Registered
- Messages
- 55
hello
I need Enigma tv list with lamdb for abertis
thx
I need Enigma tv list with lamdb for abertis
thx
Brilliant!
That fixed the pixellation/freezing on my ARM based Ultimo4K.
I edited the file /etc/sysctl.conf to add these lines
Code:## added for Abertis ### net.core.rmem_default = 16777216 net.core.rmem_max = 16777216 net.core.wmem_default = 16777216 net.core.wmem_max = 16777216 net.ipv4.udp_mem = 8388608 12582912 16777216 net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 65536 8388608 net.ipv4.tcp_tw_recycle = 0
Then in telnet, to apply the changes I ran
Code:systcl -p
After a short period of stabalization the picture is now perfect.
Hello, I tried to copy and paste in oscam config softcam Enigma1969, then I also tried to copy paste in the softcam of the oscam but the frequency to 30 west 12548 V 29600 does not enter despite the signal is excellent
/
0ce4b104:ea67:0000
s 12548000:29600000:1:3:-300:2:0:1:2:2:2
/
06a5:0ce4b104:ea67:0000:1:0
Abertis PID 701
p:ABERTIS,c:031fff,c:1502bd,C:2600,f:01
06a6:0ce4b104:ea67:0000:1:0
Abertis PID 702
p:ABERTIS,c:031fff,c:1502be,C:2600,f:01
06a7:0ce4b104:ea67:0000:1:0
Abertis PID 703
p:ABERTIS,c:031fff,c:1502bf,C:2600,f:01
is it possible to receive Abertis with vu + ultimo 4k and openatv 6.3?help:mecry:
appears abertis 701 - 703 in the transponder list
if not, enigma stop with the console init 5
insert the below to lamedb
to send to the box with ftp lamedb
start enigma init 3
restart box
you can only try
There is some forum members saying that it works using openatv 6.2 on dm900.hi rickk abertis working with oe2.5 images?thanks
How To Do Abertis 30°W
Since there are still questions about Abertis, I have created a How to Do with all the necessary files and an illustrated step-by-step guide
Good luck :thum:
yesPoint 6 is not clear to me.
Do I have to open the file lamedb that you have attached to it and the content I have to paste at the end of my lamedb of the setting that I have in my decoder?
i use Oscam emuWe don't need oscam for this ?
:hammer:astra.mips is empty
It does not work over the weekend I tried atv 6.3 and openvision in DM920.Thx a lot for this guide. I will try it in openatv on dm920.
Hope that it works.