- Messages
- 58
Showing at the mo on:-
Geant GN-OTT 750 4K EVO ALLURE
Think 'moonbase' has this receiver as well so perhaps he is able to confirm current status, thanks.
Last edited by a moderator:
Viark Forever boxes
- Thread starter Youknowme02
- Start date
Geant GN-OTT 750 4K EVO ALLURE
Think 'moonbase' has this receiver as well so perhaps he is able to confirm current status, thanks.
Esobis
Registered
- Messages
- 13
Portuguese from 30w were black last Friday too... but its a common problem at Fridays nights, some sort of attack, update... who knows..
Everything ok next morning.What's new in the 145 firmware?Showing at the mo on:-
Geant GN-OTT 750 4K EVO ALLURE
Think 'moonbase' has this receiver as well so perhaps he is able to confirm current status, thanks.
View attachment 58036
Sat Integral S1432 Combo and for sure also Rocket model has already 1.45 , but nothing is new at the moment. Same packages and same problems, nothing till now was trasfered to new server.
- Messages
- 58
As mentioned earlier, 145 or 1.45 is not firmware, simply server upgrade. Not noticed any difference in visuals as yet.
Won't open again at least in the near future.
Bulsatcom stopped using Bulcrypt encryption, is using only Nagra/Conax cardless systems now which as far as i know don't work on sharing.
The remaining channels will also go dark soon.
I have that same receiver as well here in the UK.Showing at the mo on:-
Geant GN-OTT 750 4K EVO ALLURE
Think 'moonbase' has this receiver as well so perhaps he is able to confirm current status, thanks.
View attachment 58036
For packages here so far it's the same as pre 1.45 boxes - I can't get the satellites that open and close channels on VIP so don't have that.
There have been messages about Amlogic boxes in various IKS groups.
can confirm that none of the diema channels open on other boxes either (gigablue)
manic01
Super VIP
- Messages
- 2,539
How about 1.9e diema channels?
....and max sport channels too on 1.9E?
manic01
Super VIP
- Messages
- 2,539
I can't check as I'm in Spain at the moment, they were working before.
Coastman
Registered
- Messages
- 371
Finally got round to setting up my Viark 4k this last week and found this thread has been so very useful with getting to grips with the various functions of it so have appreciated all the regular
contributors help you know who you are. As you might expect there is just a few outstanding issues on my part i would appreciate clarification on if thats ok.
1. I see that the advice for biss au to work is delete existing keys does this mean all of them or just a certain amount and is biss au still working after this at the moment?
2. I found the biss key menu in net and games ok but have seen there is shortcuts on remote if i have read it right like f1 147 and info 147 but tried these and dont work for example on f1 147
on screen graphic comes up as "Sleep Timer" so does anyone know what i am doing wrong?
3.The key menu appears to only show biss so is there another key menu or maybe which i cannot see perhaps hidden that needs a pin for example pv etc? this question has probably been
addressed on this thread apologises if it has but i have missed it going through a lot of this thread.
contributors help you know who you are. As you might expect there is just a few outstanding issues on my part i would appreciate clarification on if thats ok.
1. I see that the advice for biss au to work is delete existing keys does this mean all of them or just a certain amount and is biss au still working after this at the moment?
2. I found the biss key menu in net and games ok but have seen there is shortcuts on remote if i have read it right like f1 147 and info 147 but tried these and dont work for example on f1 147
on screen graphic comes up as "Sleep Timer" so does anyone know what i am doing wrong?
3.The key menu appears to only show biss so is there another key menu or maybe which i cannot see perhaps hidden that needs a pin for example pv etc? this question has probably been
addressed on this thread apologises if it has but i have missed it going through a lot of this thread.
Coastman
Registered
- Messages
- 371
Appreciate the quick answer on the biss menu will try it again later. If someone does answer my biss au question i should have said have the latest patch on.
- Messages
- 24,796
Best to delete ALL using SAT Button in BISS Menu
There is NO PowerVU because Viark Sat 4K Does NOT Support PowerVU Sadly .
There is supposed to Finally be a New S/W after 7 months PT 1.19 out in a months time
but there is no doubt whatsoever that it still will NOT be supporting PowerVU , it is the one major Flaw that even GT Media managed to get right , lol's
There is NO PowerVU because Viark Sat 4K Does NOT Support PowerVU Sadly .
There is supposed to Finally be a New S/W after 7 months PT 1.19 out in a months time
but there is no doubt whatsoever that it still will NOT be supporting PowerVU , it is the one major Flaw that even GT Media managed to get right , lol's
Coastman
Registered
- Messages
- 371
Thanks for the advice barney on biss keys will try it. Agree shame about pv not got round to scanning in all sats yet which includes 4.9e so will know what to expect now.
I just have a different question its to do with a dedicated sat button on the remote or lack of it. Am i correct in saying some remotes have one maybe on earlier batches and the latest ones do not or vice versa as
my remote does not. I know if i press the ok button for sat list then fi can press to go to desired sat but just wondering for those like me is there any other quicker shortcut option to see sat lists scanned in? Hope this makes sense.
- Messages
- 24,796
No sadly you have the more recent Box and Remote which they messed up with big time with NO SAT Button .
Pretty dense and Stoopid Rookie mistake by Manufacture ....but have to factor that these boxes are produced in bulk for likely well under max €30 and sold for €160+ average , so profits will be maximized to the max which is why we get a real $hitty interface and the cheapest components possible but Hey it does a job i guess : )
Pretty dense and Stoopid Rookie mistake by Manufacture ....but have to factor that these boxes are produced in bulk for likely well under max €30 and sold for €160+ average , so profits will be maximized to the max which is why we get a real $hitty interface and the cheapest components possible but Hey it does a job i guess : )
The Viark Sat 4K used to support Powervu, until the day new firmware added the AFN channels on 9 East.
No Powervu since then, sadly.
I haven't tried it for a while so can't say if it still currently does, but my Viark Droi did continue to clear Powervu after AFN was added.