Strong Firmware < Discussion >

[ank_yaw]

MULTITV & INFINITY

please can someone help me with how my srt 4669x can open infinity channels.please help me

Point your Dish to Astra 2B satellite[ Astra 28.2E} and using the Transponder parameters below

1) I am getting 11 Channels from Multitv { 12550V & SR:19531}
2) One GTV Channel { 12572V & SR 2854}
3) 16 Channels from Infinity {12543H & SR20800}
NB:Three channels are scrambled; SKY NEWS INT'L, INF VIVE & CEC Channel

The third channel which is NIGEZIE indicates No Audio/Video

My Set Top Box (STB) is strong 9x. I updated it with the last update for December 24 2010.

 

[[email protected]]

But some people are saying srt 4669x can unlock the 3 scrambled channels on infinity if it is update with a particular software. Can some help me

 

[[email protected]]

You may use 1 of 2 methods.

1. Copy your firmware to a USB Flash drive, plug to your receiver and go to USB Menu on the Main Menu and select Data Transfer then enter your stb file.

2. Use a serial cable to connect your Receiver to your PC. Run SRTLoader file and browse to your stb file to run it.

I hope your Receiver is not the 'imitation' type.

 

[[email protected]]

REOWNGRADING PROCEDURE
You may use 1 of 2 methods.

1. Copy your firmware to a USB Flash drive, plug to your receiver and go to USB Menu on the Main Menu and select Data Transfer then enter your stb file.

2. Use a serial cable to connect your Receiver to your PC. Run SRTLoader file and browse to your stb file to run it.

I hope your Receiver is not the 'imitation' type.

@geefivez, please note that the 2methods in my earlier post is for upgrading and downgrading.

 

[[email protected]]

Please is there any software for strong mytv srt 4669x that can help it crack some channels

 

[lezardo]

i hve dish 90 cm and receiver strong srt 4900
but at the sat 28.2 no channel has received only 12 channel
all the other chanels no signal can someone help me and tell me if the dish or the lnb must be chnged?
and i'm in lebanon 10x

 

[[email protected]]

Delete all the channels and rescan.if that fails then it means you need to realign your dish

 

[kunlebrown]

There is 27 new channels on STRONG SRT 4663X decoder,pls can anyone help me on how i will do it on my decoder

 

[ig0r]

What is the atellite?
What is the package?

Give more full ask and i can give you more full answer

 

[julius-femi]

i upgraded 4669x for infiniti wit 502 boot version but it not stil workin i need 4.9 boot version

 

[amgidado2001]

Pls can anyone tell me the steps to use in installing the software for SRT4669X. Thanks Its opening DSTV but no sound.

 

[[email protected]]

is your receiver strong my tv?

 

[kman7000]

helpp my 4663 x is not booting

 

[amgidado2001]

is your receiver strong my tv

Yes my receiver is strong myTV

 

[[email protected]]

ok. then check the strong threads and go to this thread. NEW SOFTWARE FOR STRONG MYTV. NOW DOWNLOAD THE 121P. IT IS A ZIP FILE SO OPEN it and copy the software in it onto your flash drive. insert the drive in your decoder.now go to , menu-usb- data transfer.u will see the software there, select it and press ok.
note: power MUST not go off until u finish

 

[[email protected]]

how is it not booting, did u try to upgrade it or u just woke up to see that it is not booting. explain so that u can be helped

 

[amgidado2001]

ok. then check the strong threads and go to this thread. NEW SOFTWARE FOR STRONG MYTV. NOW DOWNLOAD THE 121P. IT IS A ZIP FILE SO OPEN it and copy the software in it onto your flash drive. insert the drive in your decoder.now go to , menu-usb- data transfer.u will see the software there, select it and press ok.
note: power MUST not go off until u finish

I've done that but its not opening DSTV. I updated with 4669X of 12/1/2011. is it off?

 

[lastdon]

hw do insert emu soft in srt 4669x

 

[[email protected]]

please it solves sound problem but I dont think it opens dstv. The free dstv is off

 

[RICH8]

re

All.please i need a new patch for 4899x please anyone wit the patch ro if u have idie where get it please..