Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides
- Thread starter mahmoud_a1
- Start date
then i should edit c15 c00 with all abertis in lamedb?
i will try then
root@vusolo4k:~# astra --analyze http://localhost:9999/abertis/pid8006
Mar 02 17:23:54: INFO: Starting Astra SM 0.2
Mar 02 17:23:55: INFO: Bitrate: 0 Kbit/s
Mar 02 17:23:56: INFO: Bitrate: 0 Kbit/s
unfortunately result is negative.
in lamedb the setting is like that, it changed the places.
0515:0ce42d85:ea63:0000:1:0
Abertis PID 301
p:ABERTIS,c:00012d,c:031fff,C:2600,f:1
EnoSat
Senior Member
- Messages
- 1,992
and first link for analyze ?
unfortunately yes
which release?
jose57
Registered
- Messages
- 12
7.3
EnoSat
Senior Member
- Messages
- 1,992
I tried to install OpenBlackHole in Solo4K
Installed astra-sm
copied necessary files to astra and e2 from ciefp, copied softcam.key
Code:
2024/03/02 17:56:48 00000000 s (main) System name = Linux
2024/03/02 17:56:48 00000000 s (main) Host name = vusolo4k
2024/03/02 17:56:48 00000000 s (main) Release = 3.14.28-1.8
2024/03/02 17:56:48 00000000 s (main) Version = #1 SMP Fri Feb 9 08:50:33 UTC 2024
2024/03/02 17:56:48 00000000 s (main) Machine = armv7l
2024/03/02 17:56:48 00000000 s (main) Stb model = dm8000
2024/03/02 17:56:48 00000000 s (main) Stb vumodel = vusolo4k
2024/03/02 17:56:48 00000000 s (main) Stb boxtype = vusolo4k
2024/03/02 17:56:48 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 10059
2024/03/02 17:56:48 00000000 s (emu) OSCam-Emu version 799
2024/03/02 17:56:48 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2024/03/02 17:56:48 00000000 s (main) signal handling initialized
2024/03/02 17:56:48 00000000 s (led) LED support is not active. Can't detect machine type.
2024/03/02 17:56:48 00000000 s (net) cccam: initialized (fd=6, port=12000)
2024/03/02 17:56:48 00000000 s (reader) EMU [emu] creating thread for device emulator
2024/03/02 17:56:48 00000000 s (main) waiting for local card init
2024/03/02 17:56:48 1C8F5AE0 r (emu) Stream key delayer initialized
2024/03/02 17:56:48 1C8F5AE0 r (emu) Stream relay server initialized
2024/03/02 17:56:48 1C8F5AE0 r (reader) EMU [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2024/03/02 17:56:48 00000000 (emu) INFO: FFDecsa parallel mode = 128
2024/03/02 17:56:48 12940C9D h (webif) webif: decompressed 173109 bytes back into 423192 bytes
2024/03/02 17:56:48 12940C9D h (webif) HTTP Server running. ip=:: port=83
2024/03/02 17:56:49 1C8F5AE0 r (reader) EMU [emu] card detected
2024/03/02 17:56:50 1C8F5AE0 r (reader) EMU [emu] found card system emu
2024/03/02 17:56:50 1C8F5AE0 r (reader) EMU [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2024/03/02 17:56:50 1C8F5AE0 r (emu) Key file not found in: /etc/tuxbox/config/oscam-emu
2024/03/02 17:56:50 1C8F5AE0 r (emu) Reading key file: /var/keys/SoftCam.Key
2024/03/02 17:56:50 1C8F5AE0 r (emu) Total keys in memory: W:0 V:6 N:0 I:4 F:211 G:1 P:116 T:160 A:0
2024/03/02 17:56:51 00000000 s (main) init for all local cards done
2024/03/02 17:56:51 00000000 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam-emu/oscam.emmcache in 0 ms
2024/03/02 17:56:51 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam-emu/oscam.emmstat in 0 ms
2024/03/02 17:56:51 00000000 s (gbox) local gbox failed init
2024/03/02 17:56:51 7CE77CE0 c (client) plain dvbapi-client granted (LOCAL, au=auto (7 reader))
2024/03/02 17:56:51 7CE77CE0 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
2024/03/02 17:56:51 7CE77CE0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2024/03/02 17:56:51 7CE77CE0 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2024/03/02 17:56:54 7CE77CE0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2024/03/02 17:56:54 7CE77CE0 c (dvbapi) Demuxer 0 found 1 ECM pids and 1 STREAM pids in CA PMT
2024/03/02 17:56:54 7CE77CE0 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2024/03/02 17:56:54 7CE77CE0 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1388 VPID 0000
2024/03/02 17:56:54 1C8F5AE0 r (emu) Key not found: F F541A822
2024/03/02 17:56:54 1C8F5AE0 r (emu) Key not found: F 777F78F0
2024/03/02 17:56:54 1C8F5AE0 r (emu) Key not found: F 03E81F40
2024/03/02 17:56:54 1C8F5AE0 r (emu) Key not found: F 03E81388
2024/03/02 17:56:54 1C8F5AE0 r (emu) Key found: F 03E81FFF 00000000
2024/03/02 17:56:54 7CE77CE0 c (ecm) LOCAL (2600&/03E8/1FFF/0000/11_FE6566C9EB28697CFE6566C9EB28697C HOP:00:0000_0000): found (1 ms) by EMUNo editing lamedb
tests astra-sm:
input signal
demultiplex
userbouquet
Everything works on the first try, you should pay someone to set it up for you at home. Maybe it is beyond your knowledge.
Last edited:
thanks enosat.
yesterday I installed openbh 5.3 too. But when I tried to do opkg update it said it did not support it. I even could not install latest oscam. i will try anyway.
lamedb will be original image's or ciefp's?
should it be multiboot or only one image type?
and openbh should be original or backup?
yesterday I installed openbh 5.3 too. But when I tried to do opkg update it said it did not support it. I even could not install latest oscam. i will try anyway.
lamedb will be original image's or ciefp's?
should it be multiboot or only one image type?
and openbh should be original or backup?
EnoSat
Senior Member
- Messages
- 1,992
ciefp image ?
I have multiboot only so that I can verify claims like (blackhole I deleted DATApid), the whole thing took about half an hour (installation, network and LNB settings, copying, verification).
I never use backups (I don't need to put a lot of unnecessary ballast in the receiver).
I have multiboot only so that I can verify claims like (blackhole I deleted DATApid), the whole thing took about half an hour (installation, network and LNB settings, copying, verification).
I never use backups (I don't need to put a lot of unnecessary ballast in the receiver).
Last edited:
thanksss a lot enosat. at last i did it. though some of them does not open, i will do them when i have more time.
enosat, thx for everything, when i have a huge time I will try more.
I have some questions.
1. as I use ciefp settings or someone else's, there is a lot of mixing in my own channel list. some channels are deleted etc. if i carefully edit abertis on lamedb, will there be a problem?
2. can I copy paste the ciefp stream bouquet in a separate bouquet prepared by me?
3. except for lamedb, to be able to watch abertis channels by keeping my own channel list, what should i modify in the fresh image?
thanks again.
and lastly, when I scan manually the abertis frequencies, does lamedb save the scanned frequencies and so no need for frequency editing? is it ok only to add abertis files manually to lamedb?
070a:00820000:32c8:013e:1:0
Abertis PID 301
p:ABERTIS,c:031fff,c:15012d,C:2600,f:01
for example like this above.
because it is terrifying to edit lamedb as one mistake can cause problems.