Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides
- Thread starter mahmoud_a1
- Start date
With Ubuntu yes is posible have enigma2 run on a pc but unfortunately you can't have Abertis channels for now or if it's possible, I don't know how.
https://github.com/ag1455/OpenPLi-PC
In this thread you have some pictures and how to compile OpenPLi-PC
https://www.sat-universe.com/showthread.php?t=313567
Regards
Well, I'm not lucky, those channels don't work for me
The only difference I see is highlighted in the image
[url=https://subefotos.com/ver/?79cd60c8c22bbed8dbb91e1f2637fdceo.jpg]
[/URL]
Last edited:
ciefp
Member
- Messages
- 364
Is correct?
Input stream ID it should be 1
How do I modify it? won't let me change the option ...
Try manual scan only this frequency like the picture
[url=https://subefotos.com/ver/?20ae557a9ad6b82aee4b05b5907b8c86o.jpg]
[/URL]You have a signal problem at that frequency and so you can't see the channels.
I suppose it will be that, but what I don't understand is if I go to the channel, a signal appears ...
Try manual scan only this frequency like the picture
[url=https://subefotos.com/ver/?20ae557a9ad6b82aee4b05b5907b8c86o.jpg][/URL]
Hello
I have Aragon hd but the screen is black and i have a good signal in the transporter.
I have a signal, so I think it could be a key problem. which key is opening this channel for you.
Kiko2004
EnoSat
Senior Member
- Messages
- 1,993
none, TUNER and FW must support Multistream MODE
Hello again
I readjusted the antenna again, got an additional 2db, but the problem continued. The black screen and little sign (no data in the transponder)(ARAGON TV HD) my vu + duo 4k still does not work. Since I have a zgemma h9.2s, I have tried the same list of channels and this decoder has worked, I see the channel.
Another flaw of the vu + duo, is that the boom channel (hispasat) for the channel to work, I have to wait a couple of minutes for it to work, instead in the zgemma it opens it for me without problems ...
What can it be ?, on other satellites and multistream channels (5W), I have no problems ...
I readjusted the antenna again, got an additional 2db, but the problem continued. The black screen and little sign (no data in the transponder)(ARAGON TV HD) my vu + duo 4k still does not work. Since I have a zgemma h9.2s, I have tried the same list of channels and this decoder has worked, I see the channel.
Another flaw of the vu + duo, is that the boom channel (hispasat) for the channel to work, I have to wait a couple of minutes for it to work, instead in the zgemma it opens it for me without problems ...
What can it be ?, on other satellites and multistream channels (5W), I have no problems ...
Last edited:
For finding the channel BOM search manually and use Piloto=off. For Aragón no way... Bad drivers. I told that issue to the VU+ but they dont give a date for resolution of the issue.
Interesting for Aragon Channels are that when I use the QuadPIP I can see the AragonHD without sound... Interesting behaviour... I don't know exactly why.
So, we have to wait therefore or use other receivers than VU+ Duo4k...
Last edited:
Now if the Bom channel works for me.
So the problem is with the VU + drivers, in all the VU + it happens.
What difference is there in the multistream RA1 (5w) and Argon TV HD (30W)
One if it works