Smart DVB + error of filters/SmartAVS

[ParsianSat]

When we want to choose the device, we see four options. The first two ones are bda. Which one should we use? When using crazyscan, should we use the third one!? What's the difference!?

Cable of my device has two USBs. One is black and the other is red. What's the difference!?

 

[dahaka]

When we want to choose the device, we see four options. The first two ones are bda. Which one should we use? When using crazyscan, should we use the third one!? What's the difference!?

bda.dev is up to date , any new changes added to it byThe Coder .
bdas.dev coded another way NO more update , you can try it when you feel there is problem with the previous .

Cable of my device has two USBs. One is black and the other is red. What's the difference!?

Read your card manual .

 

[ParsianSat]

Inside the box, there is only a card with some explanations or a guarantee. But I have found this and I didn't find any other manuals.

Any Idea!?

 

[ParsianSat]

No but you can keep your CPU usage right down on 4:2:2 feeds such as the West Ham game shortly :thum::clapping:

Good to you that you can receive the match's signal. I have 42% quality for its feed at 0.8W, but no channel is added.

Are you using the latest version of driver- 1.0.0.5? Where can we find the older versions to test?

 

[gap30]

Good to you that you can receive the match's signal. I have 42% quality for its feed at 0.8W, but no channel is added.

Are you using the latest version of driver- 1.0.0.5? Where can we find the older versions to test?

Did have a signal, its gone off now

 

[ParsianSat]

Btw there is great for RFscan program by CrazyCat Crazyscan.7z (5MB) https://yadi.sk/d/nDzoNOuG3ND6on (streamreader.dll from it is used in SmartDVB with blindscan.dev) - I usually scan difficult transponders (including PLP in Multistream) in it and than in SmartDVB.

Thanks for the program!

I used the program and for instance, I used the crazy scan for Hotbird 13E. Then I used blind scan from above tab and when it finished, I saved its ini file in my SmartDVB's transponder folder.

Is it a right way of using this program? Do you have any tutorial for using this program?

 

[VictorLS]

Thanks for the program!

You're welcome. Thanks CrazyCat for it

Is it a right way of using this program?

Yes, I've found 106 transponders on 19e2 in 95 seconds with checked Blindscan2 (without it in 275 seconds) with TBS 5520SE.
But motorized dish adjustments (to find non-known for me SAT) I do with OMICOM only because it have very good RFscan - I set narrow range (about 20-30MHz) check Repeat and watching bell move dish to maximized signal then I try to lock i.e. feed.

Do you have any tutorial for using this program?

No, even if I have tutorial for something I'm (as Russians usually do) never read it - it's interesting to get that working by myself or in the last resort ask somebody about (I've never heard RTFM before from people because ask smart questions enough I believe). You ask logical questions too

 

[VictorLS]

So is there any way around the low symbol rates problem with the 5520se?

May be CrazyScan can lock such transponders even with 5520SE but what Symbol Rate do you think low? 1000 kS/s or lower? Can you provide some such transponders (not feeds) from east SATs I'll try to lock with TBS 5520SE
Btw CrazyCat said TBS 6903 is quite good device for receiving low SR transponders but very expansive for me and very long for my PC and very close to GTX750 on GM206 (for hardware acceleration h265 4K 10bit 4:2:0 even in WinXP) passive cooled (I remove fan from it) videocard
That's why I've bought USB tuner instead of PCI-E...

 

[gap30]

May be CrazyScan can lock such transponders even with 5520SE but what Symbol Rate do you think low? 1000 kS/s or lower? Can you provide some such transponders (not feeds) from east SATs I'll try to lock with TBS 5520SE
Btw CrazyCat said TBS 6903 is quite good device for receiving low SR transponders but very expansive for me and very long for my PC and very close to GTX750 on GM206 (for hardware acceleration h265 4K 10bit 4:2:0 even in WinXP) passive cooled (I remove fan from it) videocard
That's why I've bought USB tuner instead of PCI-E...

It was only for feeds

 

[ParsianSat]

I have a problem with SmartDVB with going full screen and exiting from full screen. It's about freezing video when from full screen I go to normal screen in which channel list are on left side. Any Idea!?

 

[VictorLS]

It's about freezing video when from full screen I go to normal screen in which channel list are on left side. Any Idea!?

What renderer do you use in Connection of app SmartDVB? It desirable be EVR.

 

[ParsianSat]

What renderer do you use in Connection of app SmartDVB? It desirable be EVR.

My settings are as follow;

 

[VictorLS]

My settings the same. So I can't help because don't see such issue now (was in the past but with newer versions that's gone).

 

[ParsianSat]

My settings the same. So I can't help because don't see such issue now (was in the past but with newer versions that's gone).

OK, no problem! Thanks for your helps so far! :thum:

BTW, what is the driver version of your 5520SE?

 

[VictorLS]

BTW, what is the driver version of your 5520SE?

1.0.0.5 in WinXP and in Win7x64 (earlier with 1.0.0.4 all was good too but some unknown remote control device was in Device Manager of Windows).
Btw what videocard do you have?

 

[ParsianSat]

I also should try out 1.0.0.4. Besides, I should remove the driver and reinstall it. I might have problem in installation.

My video card is AMD Radeon HD 7340.

 

[ParsianSat]

I've downloaded 1.0.0.4. Its file contains;

1. TBS_5520se_DVB_setup
2. tbs5520se_x64
3. tbs5520se_x86

I installed 'TBS_5520se_DVB_setup'. My windows is x64 and inside the folder of 'tbs5520se_x64' we have a file of 'dpinst64'.

What's this file? Sorry for these basic dumb questions!

 

[gap30]

Device manager - update driver - let me pick from - have disk - point to the x64 directory

Short version

 

[ParsianSat]

Device manager - update driver - let me pick from - have disk - point to the x64 directory

Short version

I followed this short version you introduced, but this window (after have disk) only shows one file inside the folder which is *.inf format a setup information with 3KB.

Is it the correct one? Was I right in doing so!?

 

[VictorLS]

Is it the correct one? Was I right in doing so!?

Yes, it's correct - just continue installing driver.