Oscam and t@ndberg

Peerate · Jul 2, 2016

...and finally succeeded!!

After I've added 1010 in caid field of emulator, and 1010:000000 in Ident field just bellow , and after couple of restarts IT WORKS!!!

OpenPli4 , oscamemu from

http://www.sat-universe.com/showpost.php?p=2036683941&postcount=453

DAMMM · Jul 2, 2016

Peerate said:
...and finally succeeded!!

After I've added 1010 in caid field of emulator, and 1010:000000 in Ident field just bellow , and after couple of restarts IT WORKS!!!

OpenPli4 , oscamemu from

http://www.sat-universe.com/showpost.php?p=2036683941&postcount=453

Enter configi to oscam.reader to be in and out on which satellite is the feed to check.

Doo Wop · Jul 2, 2016

Can confirm, it works. With oe2.0-emu as well. Great work mates ...

DAMMM · Jul 2, 2016

WORK VU+ SOLO 4K

Peerate · Jul 2, 2016

I see many people asks how to watch it tandberg in Oscam so I'll tell you how I did that. I've downloaded oscam from here
http://www.sat-universe.com/showpost.php?p=2036683941&postcount=453

Go to WEB If (web interface 192.168.X.X:xxxx in internet browser) of your Oscam and click on "emulator" reader

Then in "Caid" Field add ,1010 in the end of that field

In the filed "ident" scroll down to the bottom of the field and add ;1010:000000
Press save button on the bottom of the page

After that add T@ndberg keys, if you didn't do that already,
you can find it here http://www.sat-universe.com/showthread.php?p=2036682276#post2036682276

Pay atention on entitlement ID's , you can see how it is in my case

In the end hit save on the page bottom

Also you can add priority to emulator P: 1010 in dvbapi as it shown in the screenshot bellow.
Press save button on the bottom of the page.

In the end restart your Oscam emulator or Emigma/yourbox

I did it that way and it doesn't consumes CPU much at all, maybe about 10-20% but it depends of box and other things...

uplotre · Jul 2, 2016

Goto emulator and delete automatically created reader! It will automatically created again with 1010 included!

chelo71 · Jul 3, 2016

Peerate said:
I see many people asks how to watch it tandberg in Oscam so I'll tell you how I did that. I've downloaded oscam from here
http://www.sat-universe.com/showpost.php?p=2036683941&postcount=453

Go to WEB If (web interface 192.168.X.X:xxxx in internet browser) of your Oscam and click on "emulator" reader

Then in "Caid" Field add ,1010 in the end of that field

In the filed "ident" scroll down to the bottom of the field and add ;1010:000000
Press save button on the bottom of the page

After that add T@ndberg keys, if you didn't do that already,
you can find it here http://www.sat-universe.com/showthread.php?p=2036682276#post2036682276

Pay atention on entitlement ID's , you can see how it is in my case

In the end hit save on the page bottom

Also you can add priority to emulator P: 1010 in dvbapi as it shown in the screenshot bellow.
Press save button on the bottom of the page.

In the end restart your Oscam emulator or Emigma/yourbox

I did it that way and it doesn't consumes CPU much at all, maybe about 10-20% but it depends of box and other things...

web interface there is no emulator?

[/url][/IMG]

antrabe · Jul 3, 2016

thank you Peerate for details tomorrow as soon as a feed appear ill test let see...
on dvbapi is enough P: 1010 or there is something more behind

antrabe · Jul 3, 2016

ok i can confirm that works fine¡¡¡¡ thanks all for your help.
Now i have to check on other frec because wf50 its not so strengh for my receiver.

Working with vu duo2 and openblack hoie 0.6 oscam 11271

Robinson74 · Jul 3, 2016

Is the Wimbledon feed available now? What frequency?
Keys the same as previously?

Peerate · Jul 3, 2016

chelo71 said:
web interface there is no emulator?

Web interface of Oscam!

You loaded Web Interface of your image!

It's the same IP but port number is different, you should know port number of Oscam WebIF.

Try 8888 as port number,

BOXIP:8888

DAMMM · Jul 3, 2016

Robinson74 said:
Is the Wimbledon feed available now? What frequency?
Keys the same as previously?

Po sąsiedzku jest dostępny na Wimbledon z 7E 10960 H 9875 3/4 pare kortów.

Klucze masz w działe w nimi sekcja Tandberg

Robinson74 · Jul 3, 2016

Thanks DAMMM.
Perhaps I am still doing something wrong:

Code:

2016/07/03 15:52:14 40F0A3B9 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1010 ECM_PID: 07D1 PROVID: 000000
2016/07/03 15:52:14 40F0A3B9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2016/07/03 15:52:14 40F0A3B9 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/07/03 15:52:14 40F0A3B9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2016/07/03 15:52:14 40F0A3B9 c (config) 71 provid's loaded
2016/07/03 15:52:14 40F0A3B9 c (config) 899 service-id's loaded in 22 ms
2016/07/03 15:52:17 40F0A3B9 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/07/03 15:52:27 40F0A3B9 c (-) -- Skipped 1 duplicated log lines --
2016/07/03 15:52:38 40F0A3B9 c (-) -- Skipped 3 duplicated log lines --
2016/07/03 15:52:38 40F0A3B9 c (dvbapi) Demuxer 0 stop descrambling program number 0001 (WF50 Wimbledon)
2016/07/03 15:52:41 40F0A3B9 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1010 ECM_PID: 07D1 PROVID: 000000
2016/07/03 15:52:41 40F0A3B9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2016/07/03 15:52:41 40F0A3B9 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/07/03 15:52:42 40F0A3B9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2016/07/03 15:52:45 40F0A3B9 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

OSCam Emu r11271 (I think) and keys from there: http://www.sat-universe.com/showpost.php?p=2036683974&postcount=15

Malinga · Jul 3, 2016

I have a strange problem, cause when I open wimbledon feed on 10961 and change to 10973 or 10985, it changes feed ID from 'W50 Wimbledon' to 'CC M' and 'Court1 Wimbledon', but frequency is still the same, 10961 and it doesn't clear them until I rescan that other frequencies. When I rescan 10973 it clears that feed, but then when I switch back again to 10961, problem is still there, vice versa. I have btw VU+ solo and image is Open pli 4. Any solution, please?

matt33 · Jul 3, 2016

Malinga said:
I have a strange problem, cause when I open wimbledon feed on 10961 and change to 10973 or 10985, it changes feed ID from 'W50 Wimbledon' to 'CC M' and 'Court1 Wimbledon', but frequency is still the same, 10961 and it doesn't clear them until I rescan that other frequencies. When I rescan 10973 it clears that feed, but then when I switch back again to 10961, problem is still there, vice versa. I have btw VU+ solo and image is Open pli 4. Any solution, please?

The same goes for DM 7080 Merlin4 and VU + Ultimo Satdreamgr.

harshy · Jul 3, 2016

same here on dm800 hd its like the tuner is not clever or sensitive enough with these feeds.

nasre · Jul 3, 2016

7.E
10974 H 9875 3/4
ID: CC M

softcam.key
T 2705 01 -----------;
dm800 sim3 openpli ok

http://hizliresim.com/jnR5ym

Malinga · Jul 3, 2016

Ok, thanks, this is what I have in softcam.keys
T 2706 01 D2XXXXXXXXXXXX00 ;
T 2710 01 D3XXXXXXXXXXXX00 ;
T 2705 01 3AXXXXXXXXXXXX00 ;
T 16A9 01 D0XXXXXXXXXXXX00 ;
T 16AA 01 31XXXXXXXXXXXX00 ;
T 16AB 01 7BXXXXXXXXXXXX00 ;
T 16AC 01 7FXXXXXXXXXXXX00 ;
T 16AD 01 E8XXXXXXXXXXXX00 ;
T 16AE 01 DFXXXXXXXXXXXX00 ;
T 16AF 01 63XXXXXXXXXXXX00 ;
T 16B0 01 F5XXXXXXXXXXXX00 ;
T 1773 01 D6XXXXXXXXXXXX00 ;
T 1774 01 45XXXXXXXXXXXX00 ;
T 1777 01 F4XXXXXXXXXXXX00 ;
T 1778 01 C7XXXXXXXXXXXX00 ;
T 1ED5 01 67XXXXXXXXXXXX00 ;
T 270D 10 17XXXXXXXXXXXX35 ;
T 270D 01 BFXXXXXXXXXXXX00 ;

No sure which of entitlements opens wimbledon feeds, but this works.
Can someone write which entitlement opens which feed and how do we find right entitlement to put in softcam.key, cause I don't see entitlement when people post keys in t@ndberg section?

n3ur0 · Jul 4, 2016

Robinson74 said:

Thanks DAMMM.
Perhaps I am still doing something wrong:

Code:

2016/07/03 15:52:14 40F0A3B9 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1010 ECM_PID: 07D1 PROVID: 000000
2016/07/03 15:52:14 40F0A3B9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2016/07/03 15:52:14 40F0A3B9 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/07/03 15:52:14 40F0A3B9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2016/07/03 15:52:14 40F0A3B9 c (config) 71 provid's loaded
2016/07/03 15:52:14 40F0A3B9 c (config) 899 service-id's loaded in 22 ms
2016/07/03 15:52:17 40F0A3B9 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/07/03 15:52:27 40F0A3B9 c (-) -- Skipped 1 duplicated log lines --
2016/07/03 15:52:38 40F0A3B9 c (-) -- Skipped 3 duplicated log lines --
2016/07/03 15:52:38 40F0A3B9 c (dvbapi) Demuxer 0 stop descrambling program number 0001 (WF50 Wimbledon)
2016/07/03 15:52:41 40F0A3B9 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1010 ECM_PID: 07D1 PROVID: 000000
2016/07/03 15:52:41 40F0A3B9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2016/07/03 15:52:41 40F0A3B9 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/07/03 15:52:42 40F0A3B9 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2016/07/03 15:52:45 40F0A3B9 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

OSCam Emu r11271 (I think) and keys from there: http://www.sat-universe.com/showpost.php?p=2036683974&postcount=15

You must add CAID 1010 to emulator reader:
Oscam->readers->Emulator and add bellow CAID to list

Robinson74 · Jul 4, 2016

I did that.
Here are my 2 readers:

Code:

[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
services                      = 0d00_emu,0d02_emu,093e_emu,0604_emu,007400_emu,023800_emu,030b00_emu,ant1_emu,powervu_emu
localcards                    = 0D00:000000,0000C0;0D02:000000,0000A0;093E:000000;0500:023800,030B00,021110,007400;0604:000000;0E00:000000
caid                          = 0D00,0D02,093E,0500,0604,0E00,1010
detect                        = cd
ident                         = 0D00:000000,0000C0;0D02:000000,0000A0;093E:000000;0500:023800,030B00,021110,007400;0604:000000;0E00:000000;1010:000000
group                         = 1
emmcache                      = 1,1,2,1
audisabled                    = 1

Code:

[reader]
label                         = biss_emu
description                   = constantcw
protocol                      = constcw
device                        = /usr/keys/SoftCam.Key
services                      = biss_emu
localcards                    = 2600:000000
caid                          = 2600
ident                         = 2600:000000
group                         = 2
audisabled                    = 1

Is there something wrong with them?
Should I also include 1010 in "localcards"?

By the way, can someone please suggest better entries for BISS and other system emulators?

Oscam and t@ndberg

Peerate

Registered

DAMMM

Registered

Doo Wop

Registered

DAMMM

Registered

Peerate

Registered

uplotre

chelo71

antrabe

Registered

antrabe

Registered

Robinson74

Registered

Peerate

Registered

DAMMM

Registered

Robinson74

Registered

Malinga

Registered

matt33

harshy

Registered

nasre

Registered

Malinga

Registered

n3ur0

Robinson74

Registered