Mgcamd recordings don't work for me

[markybrook]

Using latest PGI like yourself.

 

[markybrook]

Found the answer through a Jamie_Warez reply in another thread.
I was using B: { 12 } in my mg_cfg file. Once I changed it to
B: { 09 } recordings work fine. Thanks to y'all.

 

[Glimpser]

Found the answer through a Jamie_Warez reply in another thread.
I was using B: { 12 } in my mg_cfg file. Once I changed it to
B: { 09 } recordings work fine. Thanks to y'all.

IS IT POSSIBLE TO recording HD channel ?

 

[markybrook]

Yes it recorded HD using those settings.
I have to say Oscam is SOOO much better than mgcam. Recordings are also perfect on latest PGI 0.61 image.

 

[Glimpser]

thank you very much for your swift reply
it solved the problem on recording HD channels but still there is a problem exist on time shifting on them
I will be very appreciated if you could help me solving this problem too

 

[markybrook]

thank you very much for your swift reply
it solved the problem on recording HD channels but still there is a problem exist on time shifting on them
I will be very appreciated if you could help me solving this problem too

For DGS type images. Go to menu/prefences/time setting
Set to correct GMT settings for your country and then click on Time Update button. Come out of that menu and respond yes to question save? This works for me with PGI 0.61 image. Bear in mind if you use an altenative image on USB stick this can disrupt these settings and they need to be redone.

 

[Glimpser]

For DGS type images. Go to menu/prefences/time setting
Set to correct GMT settings for your country and then click on Time Update button. Come out of that menu and respond yes to question save? This works for me with PGI 0.61 image. Bear in mind if you use an altenative image on USB stick this can disrupt these settings and they need to be redone.

what i meant was time shifting and recording don't work correctly on Hd channels and i have no problem using them on SD channels .
now can you help me solve the problem.


and again thank you for responding quickly

ps: i use mgcamd 1.35