Many thx 4 your reply and your support m8!!!Just a question.Now what is your image?Without change kernel isn't possibile can see the powerVu channels?openATV 5.0,HDMU...not works with original kernel?Many thx again,m8!!!I am not sure of the file structure for openatv, so can't give you exact instructions, but you need to backup the existing pti.ko in /lib/modules/??? and replace it with the new one. If you don't know where it is, you can try to ftp the file to the box in /tmp directory. Then telnet to the box and execute the following:
Code:find /lib/modules/ -name pti.ko -exec mv -v {} {}.orig \; -exec cp -v /root/pti.ko {} \;
If the first part does not find and rename the file correctly, the second part will not replace it.
You must reboot the box for the new module to get loaded.
NOTE!!! This pti.ko is for FTA operation ONLY - it will not work for normal operation of oscam - it only works because of the stream relay... So, you will need to put the original back if you need oscam for anything other than powervu...
Can somebody test this binary and see if AFN freeze problem is fixed?
https://mega.co.nz/#!UlwkxY5Q!8Hf5yWmqfme1jsdJJ1EfQMZRcC_2afRUgFJiWM34nGY
Many thx 4 your reply and your support m8!!!Just a question.Now what is your image?Without change kernel isn't possibile can see the powerVu channels?openATV 5.0,HDMU...not works with original kernel?Many thx again,m8!!!
Can somebody test this binary and see if AFN freeze problem is fixed?
https://mega.co.nz/#!UlwkxY5Q!8Hf5yWmqfme1jsdJJ1EfQMZRcC_2afRUgFJiWM34nGY
Look under"Config"Got it Running, but can`t seem to find the "Stream Relay" menu in config.
Right now i can only see i get picture, can`t test if still freezing because at work atm.
Look under"Config"
... at oscam_EMU (NOT oscam_svn).Look under"Config"
... at oscam_EMU (NOT oscam_svn).
Can somebody test this binary and see if AFN freeze problem is fixed?
https://mega.co.nz/#!UlwkxY5Q!8Hf5yWmqfme1jsdJJ1EfQMZRcC_2afRUgFJiWM34nGY
Can somebody test this binary and see if AFN freeze problem is fixed?
https://mega.co.nz/#!UlwkxY5Q!8Hf5yWmqfme1jsdJJ1EfQMZRcC_2afRUgFJiWM34nGY
OpenATV 5.0 on Vu+ Solo2 SE
ECM fix delay: 685
AFN Sports HD working
AFN Sports 2 working
Rest of AFN Channels freezing
Can somebody test this binary and see if AFN freeze problem is fixed?
https://mega.co.nz/#!UlwkxY5Q!8Hf5yWmqfme1jsdJJ1EfQMZRcC_2afRUgFJiWM34nGY
Can somebody test this binary and see if AFN freeze problem is fixed?
https://mega.co.nz/#!UlwkxY5Q!8Hf5yWmqfme1jsdJJ1EfQMZRcC_2afRUgFJiWM34nGY
Thanks
Vert stable , No Freeze on Vu+ Duo2 (OpenATV 5.0)
Is it just Emu or Emu plus regular oscam ?
The difference for oscam_EMU you can see bellow:... Whats the difference between svn and emu?
Joe my question to you.I have tried your pti.ko file on openATV 5.0...Amiko not reboot...(bootloop) The your pti.ko file is right for openATV 5.0 or 4.2?Or not?Why not reboot?I don't understood it...Many thx again!!!I have tested with working on openspa 4 and openatv 5, but with HDMU, there is a problem with the FTA pti.ko. I have tried without changing the pti.ko and playing with the stream delay but did not have any luck getting it to work due to the lack of the ecm pid being streamed. The change is necessary because only the FTA version of pti.ko seems to stream the ecm pid correctly...