Method of Opening PowerVu Channels in Enigma2 Using Oscam

[DM9004K]

plz give me povu keys of asiasat7 this tp 3960H27500 toomani cartoon etc

 

[Ghouri]

Hi guys, not working here on Vu+ duo2. I have this log even so I added your uploaded softcam key from first page in this post:

2015/07/13 12:37:24 0A4F89E7 r [Emu] Key not found: P 60 01

Plz check your SID. If you have not omitted SID from log, then I think SID is wrong. SID should have 4 digits (in hex format) say if SID is 60 in hex then it should be written 0600.

 

[Ghouri]

plz give me povu keys of asiasat7 this tp 3960H27500 toomani cartoon etc

Try this:
SoftCam.Key

 

[APPLIANCES]

Thanks, did you try AFN 9e?

So far only added two channels on 9E AFN that’s AFN NEWS and AFN PRIME PACIFIC.
Both open with lots of glitches.
Still using Vu+ SoloSE using OpenVIX Hades 018

HAVE FUN

 

[Ghouri]

Here is SoftCam.Key file for Asian region. It includes satellites from 57 East to 138 East (57, 64.5, 66, 68.5, 76.5, 91.5, 105.5 & 138).
SoftCam for Asia.rar
I have not tested it myself because I am away from my system. Please give feedback, is it working or not?

 

[dr_virus]

just install the files from here on my original dm7020 hd with latest pli .

On thor , Discovery HD Showcase Europe gives ok ecm time ok with a warning in the start

2015/07/13 16:18:03 2344550D c (dvbapi) *** WARNING: BAD TIME AFFECTING WHOLE OSCAM ECM HANDLING ****
2015/07/13 16:18:03 2344550D c (ecm) localuser (0E00@000000/0000/09C4/40:43E5F1051E3F1A8EA428FB7665A5A5CF): found (3 ms) by emulator
2015/07/13 16:18:04 2344550D c (ecm) localuser (0E00@000000/0000/09C4/40:AE6A38BBC67B07CB56413BC86DEBAEDD): found (3 ms) by emulator
2015/07/13 16:18:04 2344550D c (ecm) localuser (0E00@000000/0000/09C4/40:09E37A3E8237F8D32E790D19468423E4): found (4 ms) by emulator
2015/07/13 16:18:05 2344550D c (ecm) localuser (0E00@000000/0000/09C4/40:80DCA08733EFB2030714D0E7E6265D33): found (3 ms) by emulator

on stream channels i got this

2015/07/13 16:14:13 1BFFCA3D r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/07/13 16:14:14 1BFFCA3D r (reader) emulator [emu] card detected
2015/07/13 16:14:15 1BFFCA3D r (reader) emulator [emu] found card system emu
2015/07/13 16:14:15 1BFFCA3D r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/13 16:14:15 1BFFCA3D r reading key file: /etc/tuxbox/config/oscam/SoftCam.Key
2015/07/13 16:14:33 00000000 [Emu] stream client connected with request /1:0:1:AF0:2:5E:E08B00F:0:0:0:

but i got black screen , any ideas ?

 

[AVFC_Dan]

Im not seeing the stream relay options, Im using version OSCam: 1.20-SU-r170-EMU-r288-715 - Build: r1086

Using Solo 2 with vix hades installed.

Please help

Thanks,

 

[APPLIANCES]

So far only added two channels on 9E AFN that’s AFN NEWS and AFN PRIME PACIFIC.
Both open with lots of glitches.
Still using Vu+ SoloSE using OpenVIX Hades 018

HAVE FUN

On the Hades image I found the default “ECM fix delay" setting in oscam webif (Config -> Stream Relay) of 700 was probably the best value.

Changed image to OpenATV from OpenVIX on my VU+ SoloSE. The OpenATV image has the "Include ECM in http streams" enabled instead of ECM fix delay value.

Both images seem to perform about the same with some small glitches.

HAVE FUN

 

[dr_virus]

found my problem !!!! it was on stream lines most of them work great now except from ID Xtra Europe HD .is there a key change on this ? Also does anyone manage to compile an oscam WITH cccam on it ? this oscam has only newcamd connections

 

[AVFC_Dan]

Why arn't i seeing an option for Config -> Stream Relay

I installed the emu from http://www.sat-universe.com/showthread.php?t=275539&page=3

Should i be using a different version, I'm running Vix hades on Vu Solo 2.

Thanks,

 

[mansonpl]

Hi

I'm looking for keys and channel config for bwtv 13E (bundeswehr tv)

thanks

 

[Maxx@]

Hi

I'm looking for keys and channel config for bwtv 13E (bundeswehr tv)

thanks

P F861 00 5930B18E8AC8AA
P F861 01 7AC2C031D0902B


http://127.0.0.1:17999/1:0:1:1F86:319C:13E:820000:0:0:0:

 

[AVFC_Dan]

Why arn't i seeing an option for Config -> Stream Relay

I installed the emu from http://www.sat-universe.com/showthread.php?t=275539&page=3

Should i be using a different version, I'm running Vix hades on Vu Solo 2.

Thanks,

Anyone?

 

[Ghouri]

Anyone?

Plz go to post#79 and download document from there and then download file from the link given in that document and try with that version of oscam.

 

[kalehrl]

found my problem !!!! it was on stream lines most of them work great now except from ID Xtra Europe HD .is there a key change on this ? Also does anyone manage to compile an oscam WITH cccam on it ? this oscam has only newcamd connections

Here is the latest oscam-emu with all default modules included:
https://mega.co.nz/#!1xICxToK!RtPRS-Xd5a8ubFjLmo7ZpBUFiu4gNqM3VWahLiLMBKg

 

[kalehrl]

P 9C80 01 DC0A76FEEFAE2B ; discovery tur hd
P A2C0 01 DC0A76FEEFAE2B ; animal planet hd tur
P C820 01 DC0A76FEEFAE2B ; discovery science hd tur

this keys is corrent or wrong ?
disco hsirty poland ok
tlc poland ok
but disco tr not ok
animal tr nok ok
science tr not ok

I didn't add these channels because they are variations of the channels that do open. I added those which have most audio/subtitle languages included. You, however, can add whatever channels you like but it takes some time.

 

[kalehrl]

timeout reading pat error what can i do?

You probably didn't add the correct SID via dreamboxedit.

 

[humaxboy2]

Can somebody confirmed to me that it is NOT working on Vu Solo2 + OpenATV 5.0 ?
I'm getting this in oscam log, the channel seems to be decoded.
This is example on the Animal Planet HD on 1W (SID : A28 HEX, 2600 DEC)

2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 1F7C PROVID: 000000
2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 found 1 ECMpids and 18 STREAMpids in PMT
2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 serving srvid 0A28 (0E00@000000:0A28 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0A82
2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2015/07/13 22:16:19 34964571 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1F7C ANY CHID PMTPID 0A82 VPID 0A28
2015/07/13 22:16:20 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:6FEC022EE903B7C63B1CB4B58DBC5745): found (2 ms) by emulator
2015/07/13 22:16:20 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:F0BF2A7F38526D77B6BBC2BFDDFACC4C): found (2 ms) by emulator
2015/07/13 22:16:20 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:02F978EFE36DC0290E79EBE3A8254156): found (2 ms) by emulator
2015/07/13 22:16:20 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:0483B55CA62FE15A154467C3BCDB1A6B): found (3 ms) by emulator
2015/07/13 22:16:21 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:C0D7CA6CE75873B32070C0E32DAD5225): found (2 ms) by emulator
2015/07/13 22:16:22 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:84C36F7D446F9047EBE11F89C87EA7E9): found (2 ms) by emulator
2015/07/13 22:16:23 34964571 c (ecm) localuser (0E00@000000/0000/0A28/4067409F0C32C4843BBA18512A19C5780): found (1 ms) by emulator
2015/07/13 22:16:24 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:214410FB6B5535E9ADA68F15C94A1E28): found (2 ms) by emulator
2015/07/13 22:16:25 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:A4FFCA907D3E9EDFC1F057165BF167A4): found (1 ms) by emulator
2015/07/13 22:16:25 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:4224F80DD38DCD67408D8DDBF439D4C1): found (2 ms) by emulator
2015/07/13 22:16:26 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:0B1A014985973A487EBF0F7261ED3524): found (1 ms) by emulator
2015/07/13 22:16:27 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:C692F91CEE1C78117F7D50E9A61D6FE1): found (1 ms) by emulator
2015/07/13 22:16:28 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:A08821CB902DF6F4BB2DE503AA06577D): found (1 ms) by emulator
2015/07/13 22:16:29 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:BE8B543B55987ED172FE2F87AD953800): found (2 ms) by emulator
2015/07/13 22:16:29 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:0BEB04FBDAD01A8853EF92C7958EB41C): found (3 ms) by emulator
2015/07/13 22:16:30 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:7E83E8E789A97E99776F03F5BA38A8FF): found (1 ms) by emulator
2015/07/13 22:16:31 34964571 c (ecm) localuser (0E00@000000/0000/0A28/40:07B32A45BC29ABC864A40CB8411363EB): found (2 ms) by emulator

 

[AVFC_Dan]

Here is the latest oscam-emu with all default modules included:
https://mega.co.nz/#!1xICxToK!RtPRS-Xd5a8ubFjLmo7ZpBUFiu4gNqM3VWahLiLMBKg

Can't get this to work on Solo 2, does there need to be a OE 2 version?

 

[Robinson74]

Everything happens inside the STB, no PC required. Enigma2 streams to oscam-emu, and oscam-emu streams back to Enigma-2. All on the STB.

I wonder if there is a chance that a new release of oscamymod, when it appears, will open PowerVU. Does anyone know?