Latest firmwares for Pioneer

JAKITAKI

JAKITAKI

Super VIP
Messages
9,214
16_OFM_240709_PI725a16


- Using SSSP - Simple Serial Protocol Sharing
implemented protokol sssp
and the corresponding software on the PC / STB (mbox, gbox, ...)
1530 enables communication with other tunerami
through the LAN and / or the internet and the Reception of
dekodowanych of the cards supported by the tuners.
Enabling sssp:
'+, The menu, 6, 7' / 'DW HOST' - check
'+, The menu, 6, 8' / 'DW mode' - Select 'SSSP'
( 'HOST' ECM sends text - sssp is off)

- 'Menu, 6' / 'POWERS OF RECEIPT'
added information on rights for 0000 seca prov
and added information about the serial, and PBM PPUA
(Transfer of information to the next button 'B').

- '+, The menu, 6, -> 2' / 'DEBUG TV'
added option to exit debug information
on the TV screen (for developers) to assist in the busy port COM tunerze.
Sample lines from the scripts to derive information on the screen:
Call_Script ( "trace_tv", ( "pmt_send_CAID:" + IntToHex (dump.CAID_HDL)));
Call_Script ( "trace_tv", "pmt_fta");
Click to expand...
 
D

deporte

Well Known Member
Messages
4,181
Euromuis_Pioneer1530_v5.0-Plus_NL+ENG_Seca3-Fix By dynamit Team :thum:
 
Last edited:
tani1

tani1

Staff member
Super Moderator
Messages
17,767
02.01.2010
Thanks for D-mon
For watch SCT channels you must add this patch in channel list as CODE\CODE and add prov 023B00 in EMU section with this key08:

0x12, 0xCE, 0x62, 0x7A, 0xF6, 0x1A, 0x52, 0x1A, 0x94, 0xFA, 0xD6, 0x04, 0xB6, 0x18, 0xA4, 0x86, 0x10, 0x1E, 0x18, 0xA6, 0x00, 0x5A, 0x24, 0x14

Good luck
Click to expand...
 
tani1

tani1

Staff member
Super Moderator
Messages
17,767
05/01/2010

Euromuis_Pioneer1430_v5.3c, Plus_NL + ENG_Fix Smartcard-Seca3 (TEST)
MHW modifications:

Fix: Fix for Info EPG_DVB + D (Spain) channels, press the INFO button 2x.

HDL update:

Last fix Seca3 Smartcard

Read the following text of the other versions.

Have fun watching
Grts, Bobdread
Click to expand...
 
tani1

tani1

Staff member
Super Moderator
Messages
17,767
PIONEER NEW GENERATION - By NG TEAM --

Version: NG 5.2 - Published January 2010

HDL-BASE: D-mon Generator (M130x) Julek (OFM HDL basis PI725a16)

1) Insert the latest list of Hand-Rota and addition of the new patch emu Generator.
2) Replace in OFM management USALS, had jumped the patch HDL, sorry ....
3) Updated loghino 2010.
 
M

marce

VIP
Messages
7,115

Jungle gOLDbox v11


Code: 
Add


BUG solution detected the following:

- The existing pressing "D" in the selection screen of PID's.

- The one left active the antenna signal level in the display, to go with -> prompt "+".

- On trying to access the channel "-1", to use the "Ok" (recall), if we had entered perso.

- Correction of sampling Viaccess provider in service menus.


New features:

-MHW -

- Support for editing 24-byte keys in the system Viaccess dimensions x0/x1/x2 selectable with the "E" of each of the 16 bytes.

- Updated the description of providers in the service menus.

-EMU -

- Disposal of obsolete code.

- Optimization of processes to become more fluent.

- Compatible with Viaccess 2.6


JungleTEAM
 
V

vlasa

Banned
Messages
370
15xx_Magic-1.15_full_inside
Includes:
  • - Latest patches Street £ cc ess% 2.6 for SCT ABSAT + + jsc sports
  • - 2 internal lists by Digital of 20/01/2010. The list B is 13/19/1W trial, the list 666 is reduced to dual list B 13/19
  • - Third list (my_list) to be loaded with MSC
  • The fw NOT contain K * y
  • Installation procedure
  • 1 - delete the eeprom
  • 2 - send the firmware
  • 3 - the first launch first press: 8> Full Autosetting
  • 4 - After reboot adjust the language in Italian
  • 5 - set the diseqc press:> Lost 3 7> Set diseqc> Tone burst or other
  • The My_List.bin is to be sent with mediasatconnect this:
  • - After putting the decor in reception Pers/3/D
  • - Open My_List.bin with MSC (Dump / Send)
  • - Check the 3 sectors (alarm, basic, time)
  • - Connect and then press Send Folders
  • now the third list is interchangeable with the 2 internal firmware to a reset of the flash or a change firmware that is not the Magic

__________________________________________________________

14xx_Magic-1.15_full_inside
Includes:
  • - Latest patches Street £ cc ess% 2.6 for SCT ABSAT + + jsc sports
  • - 2 internal lists by Digital of 20/01/2010. The list B is 13/19/1W trial, the list 666 is reduced to dual list B 13/19
  • - Third list (my_list) to be loaded with MSC
  • The fw NOT contain K * y
  • Installation procedure
  • 1 - delete the eeprom
  • 2 - send the firmware
  • 3 - the first launch first press: 8> Full Autosetting
  • 4 - After reboot adjust the language in Italian
  • 5 - set the diseqc press:> Lost 3 7> Set diseqc> Tone burst or other
  • The My_List.bin is to be sent with mediasatconnect this:
  • - After putting the decor in reception Pers/3/D
  • - Open My_List.bin with MSC (Dump / Send)
  • - Check the 3 sectors (alarm, basic, time)
  • - Connect and then press Send Folders
  • now the third list is interchangeable with the 2 internal firmware to a reset of the flash or a change firmware that is not the Magic

thx Andrysat
 
V

vlasa

Banned
Messages
370
Includes::cheers:
  • - Latest patches Street £ cc ess% 2.6 for S * T * AT + AB + j * c sport
  • - Internal list
  • IT SHOULD NOT SEND> code (it is already implemented)
  • The fw NOT contain K * y
  • Installation procedure
  • Reset the flash, erase the EEPROM and submit ffff FW
  • Load internal list with> B
  • Send fresh fruit
  • for Arabs, go first to a channel Ar * t encoding. and when it appears to go even on Js * C
  • Good vision
 
You must log in or register to reply here.
Top