Magic-1.12 per 14XX printers 15xx and 16xx channels contains two lists:
The new and updated (23/11/08) dual / Andrysat
and a list called> 666 List:
666 channels selected from the list.
E 'can switch from one list to another in seconds
with> Pers + or> Pers and B occurred
change will be indicated by the display with> Done
Obviously, with Defiant, you can substitute
both lists with other custom.
For the 16xx was activated possibility
to call the "Service mode" (dLlo)
directly from the menu> Pers 7 6 that allows you to send
FW with the Pionero 4 or 5 without making any point on the bridge k2002.
... obviously using parallel + serial.
In the end it is sufficient to turn off and on the decoder switch from the front.
This feature was available for the 15xx, with which
can also use the only advance if serial
we have launched and connected Mediasat Connect.
.. Serega course, the patch should already be installed.
Ciao Team Andrysat
ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
Reminders
ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
Magic-1.12 > Reminders:
The first time you need press: 8 > Autosetting Full
After reboot:
Press: > Pers 3 7 > Set diseqc > Tone burst or other
Set time and language
You can switch on second list by > Pers B
and reload default > 666 list by > Pers +
On 16xx model is possible to switch in service mode > dLlo
simply press > Pers 7 6
After sending the FW shut down by the main switch and reboot