Latest DVB Dream

Status
Not open for further replies.
J

josagi

Super VIP
Messages
3,052
DVB Dream 2.0 Trial

This version has a few underlying changes. So it is more like a test version. If you have installed DVB Dream before, we recommend you to do a clean install to a different path and not an upgrade over the previous version. That way you can keep your old version working as well to revert back in case of any problem with this new version.

DVBS-2 and Diseqc should work better on most of DVB cards/boxes now
Now vendor specific functions are supported in separate BDA extension files under devices\bda_extensions folder, it is possible to force extensions by editing conf.ini
DVB-C and DVB-T/ISDB-T improvements (different bandwidth and different QAM frequency lists are now possible)
All terrestrial/cable frequencies are now grouped in country/city sets
Now Pilot & Roll Off values can be specified on scan interfaces
SkyStar HD2 should be able to lock on DVB-S2 transponders now
DD automatically recognizes the codecs installed on your system and updates codecs.ini during setup, and there is also a new button "Add installed codecs" on video options dialog, to add newly installed codecs into codecs.ini with just one click
Some network search and LCN related bugs fixed
Diseqc repeats are now handled by device interfaces
Positioner as defalt doesn't try to retune because of the crashes on some card drivers
*If your SkyStar HD2 remote doesn't work, please try "Twinhan" remote type, and report on the DD forum
*DVB-C and DVB-T/ISDB-T frequencies are now stored in "cable.ini" and "terrestrial.ini" files
*For terrestrial and cable users, a clean install & scan is recommended
*If you still have problem with diseqc, please report on the forum and try changing "main menu->options->device options->diseqc method" and increase the values in "main menu->options->performance->delay after diseqc" and "diseqc repeats"
*If you have crashes during scan when you use BDA device interface, disable TIF under device options
*If you are a programmer, believe that you can write device extensions to support your DVB cards/boxes please contact us, we will provide the API, it is quite simple. Possible to support CI / Diseqc / DVB-S2 / Blind Scan / LNB power off through device extensions
*Report problems on DD forum please
Click to expand...


thump_6408913imagescakdxcpt.jpg
DVB Dream v2.0 Trial
 
O

oktagon

SU Ukrainian "DVB card-man"
Messages
108
DVB Dream v2.0 RePack by oktagon & amidkaa

DVB Dream v2.0 RePack by oktagon & amidkaa


8-bebihfbt.jpg


8-ntberhzz.jpg


8-irkidrzz.jpg



1339790246592.png
 
Last edited:
R

REBELLE

Registered
Messages
881
DVB Dream v2.0a (08.08.2012)

DVB Dream v2.0a (08.08.2012)

(v2.0a patched version includes minor fixes for DVB-T/C users.)
What's New
***
This version has a few underlying changes. So it is more like a test version. If you have installed DVB Dream before, we recommend you to do a clean install to a different path and not an upgrade over the previous version. That way you can keep your old version working as well to revert back in case of any problem with this new version.
***

DVBS-2 and Diseqc should work better on most of DVB cards/boxes now
Now vendor specific functions are supported in separate BDA extension files under devices\bda_extensions folder, it is possible to force extensions by editing conf.ini
DVB-C and DVB-T/ISDB-T improvements (different bandwidth and different QAM frequency lists are now possible)
All terrestrial/cable frequencies are now grouped in country/city sets
Now Pilot & Roll Off values can be specified on scan interfaces
SkyStar HD2 should be able to lock on DVB-S2 transponders now
DD automatically recognizes the codecs installed on your system and updates codecs.ini during setup, and there is also a new button "Add installed codecs" on video options dialog, to add newly installed codecs into codecs.ini with just one click
Some network search and LCN related bugs fixed
Diseqc repeats are now handled by device interfaces
Positioner as defalt doesn't try to retune because of the crashes on some card drivers
*If your SkyStar HD2 remote doesn't work, please try "Twinhan" remote type, and report on the DD forum
*DVB-C and DVB-T/ISDB-T frequencies are now stored in "cable.ini" and "terrestrial.ini" files
*For terrestrial and cable users, a clean install & scan is recommended
*If you still have problem with diseqc, please report on the forum and try changing "main menu->options->device options->diseqc method" and increase the values in "main menu->options->performance->delay after diseqc" and "diseqc repeats"
*If you have crashes during scan when you use BDA device interface, disable TIF under device options
*If you are a programmer, believe that you can write device extensions to support your DVB cards/boxes please contact us, we will provide the API, it is quite simple. Possible to support CI / Diseqc / DVB-S2 / Blind Scan / LNB power off through device extensions
*Report problems on DD forum please
Click to expand...

Download DvbDream v2.0a
 
O

oktagon

SU Ukrainian "DVB card-man"
Messages
108
DVB Dream v2.0a RePack by oktagon & amidkaa

DVB Dream v2.0a RePack by oktagon & amidkaa

10-arzibdhk.jpg


10-irreysyr.jpg


10-sztdnhsd.jpg


1339790246592.png
 
R

REBELLE

Registered
Messages
881
DvbDream v2.0b (18.08.2012)

DvbDream v2.0b 18.08.2012

Code: 
This version has a few underlying changes. So it is more like a test version. If you have installed DVB Dream before, we recommend you to do a clean install to a different path and not an upgrade over the previous version. That way you can keep your old version working as well to revert back in case of any problem with this new version.
    DVBS-2 and Diseqc should work better on most of DVB cards/boxes now
    Now vendor specific functions are supported in separate BDA extension files under devices\bda_extensions folder, it is possible to force extensions by editing conf.ini
    DVB-C and DVB-T/ISDB-T improvements (different bandwidth and different QAM frequency lists are now possible)
    All terrestrial/cable frequencies are now grouped in country/city sets
    Now Pilot & Roll Off values can be specified on scan interfaces
    SkyStar HD2 should be able to lock on DVB-S2 transponders now
    DD automatically recognizes the codecs installed on your system and updates codecs.ini during setup, and there is also a new button "Add installed codecs" on video options dialog, to add newly installed codecs into codecs.ini with just one click
    Some network search and LCN related bugs fixed
    Diseqc repeats are now handled by device interfaces
    Positioner as defalt doesn't try to retune because of the crashes on some card drivers
    *If your SkyStar HD2 remote doesn't work, please try "Twinhan" remote type, and report on the DD forum
    *DVB-C and DVB-T/ISDB-T frequencies are now stored in "cable.ini" and "terrestrial.ini" files
    *For terrestrial and cable users, a clean install & scan is recommended
    *If you still have problem with diseqc, please report on the forum and try changing "main menu->options->device options->diseqc method" and increase the values in "main menu->options->performance->delay after diseqc" and "diseqc repeats"
    *If you have crashes during scan when you use BDA device interface, disable TIF under device options
    *If you are a programmer, believe that you can write device extensions to support your DVB cards/boxes please contact us, we will provide the API, it is quite simple. Possible to support CI / Diseqc / DVB-S2 / Blind Scan / LNB power off through device extensions
    *Report problems on DD forum please
Download DvbDream v2.0b
 
Last edited:
S

sky star 2

Super VIP
Messages
9,792
v2.1 (18.08.2012) What's New

Built-in BISS / Fixed CW decoding (under "Tools" menu)
New versions of TSWriter2, CHLTools, RecentRecordings, AutoCHLBackup modules
Tool tips, possible to turn off ("Disable tool tips" in Preferences/General)
Bug fixes

Download
 
A

ABDULLL

Registered
Messages
21
DVB Dream 2.1 Full by ddv122





My version of DVB Dream 2.1
• Does not require registration;
• Is the plug Vplug;
• Is the plug ACamd;
• Added libeay32.dll and libssl32.dll;
• Includes a program for the power outage SkyStar 3;
• Is the unit SecOSD;
• Is my utility SATU;
• Updated transponders on 18/08/2012;
• Removed debris from the installation folder;
• Added the English language during installation
The assembly is clean - no settings and channel list.
But it is supported by an automatic grab your settings if you put them in a folder with the file DVBD.exe (chlist.chl, Settings.cfg, SoftCam.Key, v_keys.db, v_sids.db)
During the test, and an icon thanks to Compaman


DOWNLOAD:::​

http://rghost.ru/39901143​




Hello. SatU - english version
Update Transponders and SoftCam.key to Dvb Dream


please copy in maine floder of dvbdrem


DOWNLOAD:::​

http://rghost.ru/39933440


thanx ddv122:thum:​
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
v2.1a (27.08.2012)

What's New
•Hauppauge Nova HD s2 problem on 8psk channels fixed
•settings.cfg is automatically restored from backup if gets corrupted
•Some scan bug fixed (which caused nameless channels especially on 13e)
•TT-connect S2-4600, TeVii S660, S630 should work better now
•* Now you can tell DD how long it should wait until signal lock (Preferences->Performance->Tuner Timeout), this can speed up channel scan by removing unnecessary delay on no-signal transponders.
•* Cracked versions will NOT work well and they will experience a lot of problems (!) . We recommend you to use licenced versions, for stable work and frequent updates for years to come.
 
Last edited:
Status
Not open for further replies.
Top