How to get PowerVu AutoRoll working with Oscam and Dreambox

K

kebien

Registered
Messages
1,329
dank said:
kebien, I tested this emmkey on the pc with dvbdream and poweremu2.7 and it opened normally, then I got the emu powervu emc and I played the softcam of the dm800 and also opened, thus indicating that it is a valid emm. The problem must be in some oscan configuration.
Click to expand...

You also have a rejected reader,so,the problem can be there.
See if linuxsatsupport reader is enabled and check config.If is the only reader,create one for powervu and test it
 
F

fc_candido

Registered
Messages
2
75WC in LibreELEC (official): 8.2.0 (WeTek_Play_2.aarch64) UA Works !

P 00A1 00 83DFA86CDF2xxx ; added by OSEmu Wed Nov 8 19:20:06 2017 UA: 00601xxx

P 00A2 00 83DFA86CDF2xxx ; added by OSEmu Wed Nov 8 19:20:06 2017 UA: 00601xxx

P 00A3 00 83DFA86CDF2xxx ; added by OSEmu Wed Nov 8 19:20:06 2017 UA: 00601xxx

P 00A4 00 83DFA86CDF2xxx ; added by OSEmu Wed Nov 8 19:20:06 2017 UA: 00601xxx
 
A

alexandrerpo

Registered
Messages
10
I have EMM sending now.
Channels are working.

Channels are working but I have the oscam.log message:

Code: 
2017/11/08 21:11:31 2CF56BBC c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/11/08 21:11:31 2CF56BBC c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1429 VPID 0262
2017/11/08 21:11:32 2CF56BBC c      (ecm) anonymous (0E00@000000/0000/00A1/72:00000000000000000000000000000000): rejected user ident (0 ms) - Sportv 1 HD (no card support 0E00@000000)
2017/11/08 21:11:32 2CF56BBC c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/11/08 21:11:32 2CF56BBC c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1429 VPID 0262
2017/11/08 21:11:33 2CF56BBC c      (ecm) anonymous (0E00@000000/0000/00A1/72:00000000000000000000000000000000): rejected user ident (0 ms) - Sportv 1 HD (no card support 0E00@000000)
2017/11/08 21:11:33 2CF56BBC c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/11/08 21:11:33 2CF56BBC c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1429 VPID 0262
2017/11/08 21:11:34 2CF56BBC c      (ecm) anonymous (0E00@000000/0000/00A1/72:00000000000000000000000000000000): rejected user ident (0 ms) - Sportv 1 HD (no card support 0E00@000000)
2017/11/08 21:11:34 2CF56BBC c   (reader) SoftCam.Key [emu] EMM: reader 0E00 match since emmpid has no provid -> SEND!
2017/11/08 21:11:34 2CF56BBC c   (reader) SoftCam.Key [emu] EMM: reader_caid 0000 != emmpid caid 0E01 -> SKIP!
2017/11/08 21:11:34 2CF56BBC c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/11/08 21:11:34 2CF56BBC c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1429 VPID 0262
2017/11/08 21:11:35 2CF56BBC c      (ecm) anonymous (0E00@000000/0000/00A1/72:00000000000000000000000000000000): rejected user ident (0 ms) - Sportv 1 HD (no card support 0E00@000000)
2017/11/08 21:11:35 2CF56BBC c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/11/08 21:11:35 2CF56BBC c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1429 VPID 0262
2017/11/08 21:11:36 2CF56BBC c      (ecm) anonymous (0E00@000000/0000/00A1/72:00000000000000000000000000000000): rejected user ident (0 ms) - Sportv 1 HD (no card support 0E00@000000)
2017/11/08 21:11:36 2CF56BBC c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2017/11/08 21:11:36 2CF56BBC c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1429 VPID 0262
2017/11/08 21:11:37 2CF56BBC c      (ecm) anonymous (0E00@000000/0000/00A1/72:00000000000000000000000000000000): rejected user ident (0 ms) - Sportv 1 HD (no card support 0E00@000000)
2017/11/08 21:11:37 2CF56BBC c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!

Why this message:

(no card support 0E00@000000)
 
A

alexandrerpo

Registered
Messages
10
fc_candido said:
75WC in LibreELEC (official): 8.2.0 (WeTek_Play_2.aarch64) UA Works !

P 00A1 00 83DFA86CDF2xxx ; added by OSEmu Wed Nov 8 19:20:06 2017 UA: 00601xxx

P 00A2 00 83DFA86CDF2xxx ; added by OSEmu Wed Nov 8 19:20:06 2017 UA: 00601xxx

P 00A3 00 83DFA86CDF2xxx ; added by OSEmu Wed Nov 8 19:20:06 2017 UA: 00601xxx

P 00A4 00 83DFA86CDF2xxx ; added by OSEmu Wed Nov 8 19:20:06 2017 UA: 00601xxx
Click to expand...

Now autoroll works in octagon sf4008 with Openatv 6.1

Thanks to the @fc_candido that made available a .ipk compiled for ARM and Mipsel

It was compiled for us users of Brazil (EMM)

However when installing .ipk the directory /usr/keys/* already contains all oscam config

https://forum.XXXt.org/threads/canais-power-vu-off.24033/page-6#post-353581

Advertising is prohibited for other forums here
 
W

wannaboon

Registered
Messages
19
hi

is it acceptable to use colon instead of space in emm and ecm key?

eg. EMM P:srvid:UA:Key

eg. ECM P:srvid:00:key
P:srvid:01:key

thanks
 
R

Rickk

Registered
Messages
2,375
example:
P 009E0066 00 00000000000000 # AFN|prime Atlantic
P 009E0066 01 00000000000000 # AFN|prime Atlantic
P 009E 00000000 00000000000000 # EMM Key
 
Last edited:
S

Sakhawat

Registered
Messages
1
Rickk I realy appreciate your work, I just wanted to ask onething....

What is Unique Address and Emm Key
From where I can find
Can I add as dummy Emm key
 
ro_54

ro_54

Registered
Messages
685
Let me clarify this autoroll feature: is it working with EMM keys only, because with a dummy (000000..) ECM set of keys is not rolling.
 
ro_54

ro_54

Registered
Messages
685
Another question: is this osecam-emu designed to work on certain providers, because does not open ch with verified ecm keys (good on 2 other stb), for north america sat.
tested with only 1 set of good ecm keys for a specific channel & does not open.
 
K

kebien

Registered
Messages
1,329
ro_54 said:
Let me clarify this autoroll feature: is it working with EMM keys only, because with a dummy (000000..) ECM set of keys is not rolling.
Click to expand...
You MUST have EMM keys to autoroll.
You MUST have dummy ECM keys to autoroll.

Autoroll does not work if any of this are missing.
 
K

kebien

Registered
Messages
1,329
ro_54 said:
Another question: is this osecam-emu designed to work on certain providers, because does not open ch with verified ecm keys (good on 2 other stb), for north america sat.
tested with only 1 set of good ecm keys for a specific channel & does not open.
Click to expand...

Oscam open 100% of channels any other STB does.
All STB are using the code from Oscam to open this channels.

You might have a Oscam settings problem.

Please share what channels you see not opening.
 
ro_54

ro_54

Registered
Messages
685
kebien said:
You MUST have EMM keys to autoroll.
You MUST have dummy ECM keys to autoroll.

Autoroll does not work if any of this are missing.
Click to expand...
That explains it. So this is useless, unless you hunt for EMM keys.
But still, how come other channels are being opened with ECM keys only?
here are my settings for dm800se&a8p sim:
sorry, there is no option to attach a pic, but anyways i'm giving up on this. i'll be back when more work will be done on this oscam-emu stuff.
 
You must log in or register to reply here.
Top