Has been modified OoZooN-Image-dm800-3.1

[ramiMAHER]

Hi Rami, still not working here.
It's still stuck on /etc/rcS.d/S04bootup
I think the modprobe bcm7401 goes wrong and after this, the loop check for the existence of the device /dev/dvb/adapter0/video0 never ends, because it doesn't exist due too the faulty modprobe.
I hope you can solve it, many thanks for al your effort :thum:

root@dm800:~# modprobe bcm7401
modprobe: failed to load module dvb_core (/lib/modules/2.6.18-7.4-dm800/kernel/drivers/media/dvb/dvb-core/dvb-core.ko): No such file or directory

This file has nothing to do in the off



This time I worked with more devices is the previous image

Please try each of the images he says he has worked or not

 

[milicacy]

when we transfer in dreambox after we must put and 76 c file or only image

 

[irco]

when we transfer in dreambox after we must put and 76 c file or only image

Only image by RamiMaher because it has already 76c ssl


EDIT

I've tried all oozoon modified image but all hangs.

I've tried original oozoon+SSL-76C: it boot but no tuner found

 

[fmc361]

sorry rami, image flashed, stop in "DreamMultimedia booting..."

In flash Dreamelite 3.3D
Sim2.01 ssl#76c
Rev J(tuner)

 

[gjstroom]

This file has nothing to do in the off
This time I worked with more devices is the previous image
Please try each of the images he says he has worked or not

Sorry I realy don't understand what you're trying to say. Do you use some translator tool to put things in english ? It's realy hard to figure out what you mean.

When I boot the box, it's stuck on booting. I can do a telnet (dhcp address) and see that's it's assigning lots of cpu (about 75%) to the /etc/rcS.d/S04bootup process.
I can't read any /proc/progress, that's still empty.

 

[secaspider]

Aparently with the boot 76c and the original images let to start up without problems, but the problem appear when don´t find the tunner or other devices.
If we try with Rami´s patched images it cannot boot, in some decoders (i haven´t not try it at the moment with the last release...sorry), but I´m trying to get clues from where can come the problem, aparently "the drivers" , I wouldn´t be surprise if there is a driver in reference with the "hotpluging detection" cause tthe failure...

 

[ramiMAHER]

To the brothers who do not work with imag there

Difficulty to modify images for each of the different kinds of fake and poor quality of hardware


This is all the problem only in the hardware industry and quality

 

[busman]

To the brothers who do not work with imag there

Difficulty to modify images for each of the different kinds of fake and poor quality of hardware


This is all the problem only in the hardware industry and quality

rami is right its quality of hardware ,one of my dms works fine the second one hangs half way through im just about to see if my mate one works all three boxes from same supplier ,we get what we pay for

 

[wawryl]

To the brothers who do not work with imag there

Difficulty to modify images for each of the different kinds of fake and poor quality of hardware


This is all the problem only in the hardware industry and quality

I always had a problem with oozoon but diferent images worked perfectly I will wait for newnigma2 with new drivers. Does anyone checked this soft on DM800PRO?

 

[stecis]

For me no boot.. in flash with sim_2.0.1 even Newenigma 3.1.1 modify... I'm sorry Rami :mecry:

 

[secaspider]

The people who says don´t work can tell some about their clons. For example Tunner Alps rev.L:3 (that is mine as well), and I bought in China (To the admins.. Can we say the name of the shops?) etc, maybe we can compare what clon are working and what clons not.
Thank you

 

[fmc361]

*Tunner Alps rev.J - and I bought in China
*18 months old

 

[darkr]

Tuner Alps rev.L:3 bought in China( distrubuted from Europe ) , Images not working

 

[erol029]

Tuner Alps rev.L:3 bought in China( distrubuted from Europe ) , Images not working

is it just me or.... i flash my dream with oozoone 3.0.1 they all went good,tuner is working but the led display not...it only shows 2.0.1 simteam etc...same is for newnigma 3.1.1...where could be the problem?

 

[ramiMAHER]

dreamteam image dm800v2.1

Image Date: 19/11/2010

Break the image is protected

Examination has been working without problems

Beautiful image and fast

And there are imag with the new cam Emu ccam

And also the server to download

These are some pictures

imag upload will be soon

Regards​

 

[momi]

not working Oozoon 3.1.1 sorry block on boot !

 

[secaspider]

The tunner alps rev l:3 looks problematic... we´ll see

 

[secaspider]

I tried to install the image again with the new upgrades by Ramimaher but Is stuck in the first rebooting. So Tunner rev L:3 not good at the moment ....shame. Probably could be as well the main board I wouldn´t be surprise. I have got a friend whos got a clon with the label newdvb, and for more he tries to install the tunner USB it doesn´t detect it, so maybe we have the same problem with the rebooting in some models of clones.

 

[momi]

same problem! remains stuck at boot! test it with no tuner and still remains the same block at boot

 

[secaspider]

It is very extrange I never had a minimum problem with this box. Obviously is the new protection or the hardware. We have to be patient and wait, I´m sure something will come.