Firmware for Opticum 9600 HD
- Thread starter bozomustafa_68
- Start date
- Messages
- 17,767
22-03-2010
Changes from last version
=========================
1. fixes USALS angle properly.
2. fixes SCART RGB/CVBS saving problem.
3. fixes some russian string.
4. fixes hanging issue. when we recording russian channel.
5. change epg reservation color(yellow).
Changes from last version
=========================
1. fixes USALS angle properly.
2. fixes SCART RGB/CVBS saving problem.
3. fixes some russian string.
4. fixes hanging issue. when we recording russian channel.
5. change epg reservation color(yellow).
TEST 3.20 full fcombo from date: 25.03.10
update_main_full_3.20_20100324_fcombo_IDFilter_test
Changes from last version
=========================
Add cardsharing IDENT filter.
Add filter only through Softcam.key files add
Press Mode "blue button" see all filter list
update_main_full_3.20_20100324_fcombo_IDFilter_test
Changes from last version
=========================
Add cardsharing IDENT filter.
Add filter only through Softcam.key files add
Code:
{{0500 023700} {0500 030600} {0654 000000} {4AE1 000000}}Press Mode "blue button" see all filter list
Software 3.21 full fcombo from date: 26.03.10
update_main_full_20100326_fcombo_3.21
Changes from last version
=========================
1. when we enter timeshift mode, we delete timeshift files on external device.
2. possible to select time with left and right button (from manual to current event) directly.
3. when we enter standby mode, we check the nearest event. If less than 5 minutes to the nearest event, we set the next wakeup time to current time + 1 min(for the next event recording).
4. keep the pre record confirm window until recording start.
5. if file button pressed with external HDD, display "NO DISK CONNECTED".
6. if hdd connected with unsupported filetype or not formatted one, display "Please format your HDD".
7. when there is no subtitle and teletext data available, display "No subtitle data", "No teletext data".
8. Add cardsharing IDENT filter.
Add filter only through Softcam.key files
update_main_full_20100326_fcombo_3.21
Changes from last version
=========================
1. when we enter timeshift mode, we delete timeshift files on external device.
2. possible to select time with left and right button (from manual to current event) directly.
3. when we enter standby mode, we check the nearest event. If less than 5 minutes to the nearest event, we set the next wakeup time to current time + 1 min(for the next event recording).
4. keep the pre record confirm window until recording start.
5. if file button pressed with external HDD, display "NO DISK CONNECTED".
6. if hdd connected with unsupported filetype or not formatted one, display "Please format your HDD".
7. when there is no subtitle and teletext data available, display "No subtitle data", "No teletext data".
8. Add cardsharing IDENT filter.
Add filter only through Softcam.key files
bozomustafa_68
Well Known Member
- Messages
- 16,935
Software_3.22_Conax_(HD_TS_9600)_2010_04_01
Modification: 3.22
Modification: 3.22
Code:
- fixes Conax card problem in lower Card slot if two conax cards used
- fixes hanging problem for XXX Xtreme channel with Polsat module
- 36E Tp information edited
- removes old timeshift file before checking free disk space for timeshift
- possible to select record time with left and right button (from manual to current event directly)
- If receiver turned off less than 5 minutes to the nearest timer event, wakes the receiver up after one minute
- keeps the pre-record confirm window until recording start
- displays "NO DISK CONNECTED" if file button pressed, and no external HDD connected
- displays "Please format your HDD" if hdd with unsupported filetype or not formatted one connected
- displays "No subtitle data" if there is no subtitle data available
- displays "No teletext data" if there is no teletext data available
Last edited:
bozomustafa_68
Well Known Member
- Messages
- 16,935
Software_3.22_Conax_(HD_9600)_2010_04_01
Modification: 3.22
Modification: 3.22
Code:
- fixes Conax card problem in lower Card slot if two conax cards used
- fixes hanging problem for XXX Xtreme channel with Polsat module
- 36E Tp information edited
- removes old timeshift file before checking free disk space for timeshift
- possible to select record time with left and right button (from manual to current event directly)
- If receiver turned off less than 5 minutes to the nearest timer event, wakes the receiver up after one minute
- keeps the pre-record confirm window until recording start
- displays "NO DISK CONNECTED" if file button pressed, and no external HDD connected
- displays "Please format your HDD" if hdd with unsupported filetype or not formatted one connected
- displays "No subtitle data" if there is no subtitle data available
- displays "No teletext data" if there is no teletext data available
Last edited:
bozomustafa_68
Well Known Member
- Messages
- 16,935
Software_3.23_(HD_9600)_2010_04_26
Code:
Changes from last version
=========================
1. User can unlock recorded file after password input.
2. Fix hungarian, czech EPG string problem.
3. USB Memory(Sandisk 16G) recognization fix.
Last edited:
bozomustafa_68
Well Known Member
- Messages
- 16,935
Software_3.24_Conax_(HD_TS_9600)_2010_04_28
Code:
Modification:
- fixes OSD transparency bug
- fixes recordings locking
- Hun, Cze EPG font update
- improves HDD compatibility
Last edited:
bozomustafa_68
Well Known Member
- Messages
- 16,935
update_main_20100428_fs2_3.24.
Code:
1. Fix transparency saving problem.
Last edited:
bozomustafa_68
Well Known Member
- Messages
- 16,935
Software_3.25_Conax_(HD_TS_9600)_2010_05_18
Code:
Modification:
- modifies recording procedure (fixes recording cancel bug, when time information on target channel is different)
- fixes bug during playback at the end of file (when next button hit)
- extends HDD filelist reading routine
Last edited:
bozomustafa_68
Well Known Member
- Messages
- 16,935
Software_3.26_Conax_(HD_TS_9600)_2010_06_01.
Code:
Modification [COLOR="Red"]3.26 [/COLOR]
- adds scrambled SUBTITLE and TELETEXT support.
- fixes multi-language EPG support
- fixes bug: (when exit button hit during channel switching)
- upgrades TELETEXT via SCART functiondreamer1983
Super VIP
- Messages
- 4,878
***********************###########################***********************
* This software supports AAC audio codec. *
* *
* To use the codec, please be sure AC3 option in A/V option is: OFF *
* *
* CAUTION!!!! *
* In This Software DOLBY DIGITAL SOUND CAN BE HEAR *
* VIA DIGITAL OUTPUTS ONLY (HDMI, SPDIF) *
* AND ONLY IF AC3 OPTION IS SET TO SPDIF OR SPDIF+HDMI *
* *
***********************############################**********************
* This software supports AAC audio codec. *
* *
* To use the codec, please be sure AC3 option in A/V option is: OFF *
* *
* CAUTION!!!! *
* In This Software DOLBY DIGITAL SOUND CAN BE HEAR *
* VIA DIGITAL OUTPUTS ONLY (HDMI, SPDIF) *
* AND ONLY IF AC3 OPTION IS SET TO SPDIF OR SPDIF+HDMI *
* *
***********************############################**********************
bozomustafa_68
Well Known Member
- Messages
- 16,935
Software_3.27_Conax_(HD_TS_9600)_2010_06_24
Code:
Modification: 3.27
- fixes descramble by CAM after return of signal routine.
- modifies 16E sat transponder data
Last edited:
dreamer1983
Super VIP
- Messages
- 4,878
Multicas & emu update BIS TV 13.0E 19.2E 5W_
bozomustafa_68
Well Known Member
- Messages
- 16,935
Software_3.28_Conax_(HD_TS_9600)_2010_07_29
Code:
Modification:
3.28 from date: 29.07.10:
- adds EPG language selection function
- adds recording subtitle function (if they are turned on)
- Adds slowmotion funtion x1/2, x1/4, x1/8, x1. for playback and timeshift
- Adds more language for subtitle and audio
- polish strings update
- fixes Twee function hanging
- adds support of dnew type of TNK card
Last edited: