Firmware for Opticum 9600 HD

[bozomustafa_68]

Software do cyfry+ i TNK Opticum 9600 HD
Software do cyfry+ i TNK Opticum HD TS 9600

 

[marce]

Opticum_HDTS_9600_fcombo-HD_9600_fs2_3.04

 New sw for Opticum 9600! Supporting CCCam, Newcamd, and much more. To activate functions go to "Multimedia" menu, and press 8888 (or more:)). Special keys: 'mode' - card sharing status, and reconnection, 'help' - Keylist

 

[elgeneral]

Software 3.05

Conax 3.05
JPEG Viewer, compared to 3.02

3.04/3.05 Lower reader does not decode, sees the card but does not decode, you have to wait for the patch. 3.02 does not even checked before but probably not decode.

Display settings for me are poor compared to 7x00CXE.
Only transparency and duration of the standby tuner does not show all the time in a dark screen, I just glanced at what time tuner
Able to give options for the channel name scrolling on the display, you need to add much more. When you change the channel scrolls a long time and then you see only the beginning.

Shar me not at all interested in anything so I will not be tested
Generally soft fast at 3.05 GLOBO showed.

OSD via HDMI / Component is strange, I do not know if it kicked hardware or software, such as if the transfer is "fairies", the picture is about my LCD monitor can wine or something but I doubt.

Unfortunately, monitor / TV I have in another room, and as long as the TV card connected to the SD.

Pues si :thum:

 

[marce]

update_main fcombo_3.05

 

[Fredsonn]

Software_3.06_Conax(HD_TS_9600)

ENGLISH:

Modification:

- CA Message On/Off switch added 
- TXT subtitles fixed
- recording modifications: record event as default option
- recording modification: record step each 10 minutes
- default audio and subs language in wizard fixed
- JPEG Viewer update 
- polish, german, russian translations modified


--------------------------------------------------------------------
POLSKI:

Modyfikacja:

- Dodano mozliwość wyłączenia informacji z karty Conax
- poprawiono działanie napisów TXT
- dodano opcję nagrywania aktualnego zdarzenia (domyślna opcja nagrywania)
- zmieniono krok nagrania z 30 na 10 minut
- automatyczny Wybór języka ścieżek audio i napisów po wybraniu języka w kreatorze ustawień (wizard)
- poprawiono działanie Przeglądarki zdjęć
- zmodyfikowano tłumaczenia dla języka polskiego, niemieckiego i rosyjskiego

 

[ptdvod]

new sw 9600HDTS_Full_fcombo_3.07 & 9600HD_Full_fs2_3.07

 

[bozomustafa_68]

Software_Opticum_HD_TS_9600_full_20100108_fcombo_3.09

 

[elgeneral]

9600HD Full fs2 3.09

 

[bozomustafa_68]

Software_3.11_Conax(HD_TS_9600)_2010_01_15

 

[bozomustafa_68]

Software 3.12 full Opticum 9600_ S20

 

[elgeneral]

Software 3.13 Opticum 9600

 

[bozomustafa_68]

Software 3.14 full Opticum 9600

Software change history :
- some modifications on PVR 
- fixed problem with slowing down of receiver in EPG menu
- fixed problem with hanging when pressign STSTUS when USALS is turned on
- updated TP list for russan satellites
- updated translation
- fixed hanging receiver in timer menu 
- added finction of formatting new hard disk without partition
- fixed cccamd (polsat, orf, sky deutschland)

 

[marce]

9600HDTS_Full_fcombo_3.14_2

Fixed some bugz.

 

[marce]

Opticum 9600 software 3.16

15-02-10

 

[ptdvod]

new 3.18 from date: 23.02.10

- adds "Automatic power down" function. default value is 3hours
- fixes the problem going to standby at 00:00 sometimes
- implements the function Dolby Digital audio over HDMI.
- User can control volume of uncompressed audio to external AMP
- adds signal bar in status.
- fixes the problem going to standby mode repeatedly during 1 minute after activating Sleep Timer
- fixes wrong end time after EPG record from default screen
- improves HDD compatibilities
- improves diseqc 1.2 function
- makes it possible that user can modify LNB Frequency manually at Dish Setup
- TP parameters can be modified with TP Edit
- In "Edit channel" after deleting channel, channel name marked with red color(doesn't care select or not)
- keeps last position when timeshift is stopped by Recording Timer Stop. So user can continue to watch
- displays "PLAY" at front panel when recorded files are played
- displays "Reading HDD Data" after pressing "File List" button
- fixes Time Zone Offset bug

 

[linky]

new Full 3.18 from date: 23.02.10
Software 3.18 full Opticum 9600 HD TS

Test Firmware for NTV plus cardsharing

Test Software full Opticum 9600 HD TS

 

[bozomustafa_68]

Opticum 9600 software 3.19

25 02 2010
1. trasnlates some strings regarding Russian
2. fixes Russian Font

 

[ptdvod]

new 3.19 from date: 4.03.10

 

[linky]

NEW Test Firmware for NTV plus cardsharing
Base Firmware fcombo 3.19

 

[bozomustafa_68]

Software_3.20_Conax_(HD_TS_9600)_2010_03_17

Modification:

- fixes USALS problems

- modifies EPG style (bigger fonts sizes)

- changes epg reservation color(yellow)

- fixes SCART RGB/CVBS saving problem

- fixes russian strings

- fixes support of some USB devices bug