Ferguson HD [Main Chat]

[puremind]

@914mrx

What Type of Dongle - WiFi?

Should work like the rest of the Ariva Family (eg. 102E/202E....)

USB-Wifi dongle based on Rt5370 Chipset

LOGILINK WL0145
TP-LINK TL-WN727N
Allnet ALL0234

Here the wifi dongle for a few coins for the 250hd

http://www.ebay.ie/itm/RT5370-Mini-...rs_Dongles&hash=item35bdf4bd07#ht_4482wt_1092



If the receiver does not have the wifi option on the menus, you would have to get a wifi Ethernet bridge like this:
http://www.ebay.ie/itm/110920235199?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Might be cheaper options on eBay, but it's cheap enough

Good luck.

 

[dragonator]

Hello, i have a problem with my hf8900. I'm trying to use it with Gladiator v1.07. The box conects to the software and everything looks ok, but the picture is not clearing. Am i doing something wrong or there is a problem in the box with sssp rs232 ?
PS. i have an calypso module and with it the box work ok and picture is clered.

 

[914mrx]

Hello JAKITAKI
can you please tell me wich editor i need to use to input the keys to "Fox Sports HD,TVI Internacional e EFE (Hispasat)"
Thank´s
914mrx iwo:

 

[JAKITAKI]

Hello JAKITAKI
can you please tell me wich editor i need to use to input the keys to "Fox Sports HD,TVI Internacional e EFE (Hispasat)"
Thank´s
914mrx iwo:

keys to work, the name of the channel must be the same as the keys

receiver channel = Fox Sports HD
edytor keye = Fox Sports HD

 

[Optimus.7]

A little question: if i flash the box with a patched firmware, after i can re-flash with a new original firmware in case of return in warranty? There are problems?
Thanks a lot in advance!

 

[JAKITAKI]

A little question: if i flash the box with a patched firmware, after i can re-flash with a new original firmware in case of return in warranty? There are problems?
Thanks a lot in advance!

always problems may occur
but, you can always fix the problem by uploading the software for rs232

 

[Optimus.7]

So, if i flash the box with a patched firmware from USB, and have no problems, can i flash the box with an official firmware from USB?
I would try the patched firmware, and in the case, switch back to the original firmware for don't invalidate the warranty.
Thanks again and sorry for my english

 

[fRUTTiFrESH]

@Optimus.7

yes You can switch between the original an patched FW without problems.

Saludos

 

[chapdis]

bug

I'd like to report bug.
When receiver get back from standby mode, sound is switched off, sound off icon on screen. Need to restart with back switch few times...
Any fix ? Thanks for the good job

 

[jimde]

Thanks keep up the good work

 

[Robbie085]

please work

:thum: hope this works for me.. im getting the ASH message

 

[chapdis]

:thum: hope this works for me.. im getting the ASH message

ASH ? What 2 u mean ?

 

[JAKITAKI]

ASH ? What 2 u mean ?

ASH, after uploading, wrong software
You can fix it by uploading the software via RS232

 

[chapdis]

ASH, after uploading, wrong software
You can fix it by uploading the software via RS232

OK Thanks. I have upgraded this way.
Just noticed after receiver goes s/by, sound is off (icon on screen) and needed to reboot with the back switch

 

[FRANCIS67]

COMBO 150 AND WEB TV

Hi

I have the Combo 150 and since 3 days I don't receive Youtube via Internet (message is "no network"). But I receive Dailymotion.

Can someone help me ? :mecry:

Thanks a lot

Francis

 

[chapdis]

same problem for me

 

[MICKAH]

Getting this on the ariva250 on Youporn, saying Network not available, the rest is fine, could be down to the service provider, this is on the last version firmware 1.91 patched - Just of note, these boxs are unstable with a c-line on them, have tried and tested this on various types, all the same issue, glitching, scrambling, you will need a N-Line, its the more stable on these, lastly, dont put anything on top of the box, they have tendency to overheat and this sets the glitching off. Just thought I would share

 

[Dsempatao]

I have the 250 Combo with original FW. Yesterday I tried the internet connection over PCL. Google Maps worked, but not YouTube: "Network error".

DaylyMotion connection attempt was hanging forever, so I had to actually disconnect the box from the mains (power button does not power off, just does standby, but when the box hangs it is useless).

 

[enrydgl]

Hi,
with fw custom patch :

1 - Can I used Ariva 150 hd like newcamd server (no local network) with DVB-T card?
2 - Can I used Ariva 150 hd like newcamd client for DVB-T card?

Thanks.

 

[kanetaker2010]

If the card is a tiger nagra you can't use it on both boxs, because there aren't nagra support for them.