Try this method mate with the files from the link it will force the flash button to bacome active.
OK mate
Try this hacked DreamUP for clones
http://www.sat-universe.com/showthread.php?t=141826
To use
1. Connect you null cable to the 800 with no power supply connected.
2. Unpack the 2nd stage pack and go in to the folder named different method.
3. Start DreamUp and when it finds you 800 apply the power to the 800, ignore the error message you getting.
4. Now execute the enforcer.exe and press on enable.
You should now see the flash button and be able to select your image and flash it.
Ferret
Hi
I have 800 HD PVR clone. but no problem with" no ca found" it is okey.
I start dreambox and I see Dreamox logo on the display but drambox is not booting( only Logo of dreambox)i cant see nothing no IP of dreambox, or no version of bootloader nothing only the logo of dreambox.
I did everything you told. the flash button on dreamup is now visible, but when I click I see "calculating checksum..." ( 25 minutes) and dreamup dont wordk, i cant install to image.
please help, dreambox is death
Forgot to mention that you need to have an working local network (through switch) or at least an crossover lan cable through DM and your PC, you had to have both, DM and PC in the same network.
Please clarify are you trying this with null cable on its own or with null and Ethernet cable or just Ethernet ?
From what you say above you don't have the NO CA Error so why are you not flashing normally over your browser ?
Hello Marc,Hello,
Well, I'am sorry to hear that, in order to understand your problem please give us some more infos.
As so, please answer what Ferret asked and also please answer following questions,
What is not working? The method proposed by me worked every time on my DM800HD PVR Clone. Is fastest way, if you choose to flash through serial cable should take 1 hour and so.
Could you put the IP's into DreamUP?
The Flash-Loader is uploaded to your DM by DreamUP?
Can you access the web interface with your preferred browser accessing the IP set in the beginning on DreamUP?
The DreamUP is detecting the DM, is telling you what version is?
Did you ever used before the method used now and worked?
Do you have any error on your end?
Best Regards,
have you installed the drivers for that usb to null modem cable it usually gives a new virtual com port not com 1 usually com 3 or com 4
USB to serial adapters can be problematic
Id try fix your power button issue and flasj over browser or use a proper serial port on another PC .
Hi,
Your video does not show if the flash-uploder has finish it's job by starting the http service.
Please let me know if you connect the LAN cable direct between your DM and PC, if so, you need to have an crossover cable, if this cable is not crossover one you should use a switch between your DM and PC and two LAN cables.
I have also an usb to rs232 converter/adapter and is working ok, if your DreamUP it see the DM is fine.
At this point you should first try other version of DreamUP and be sure that your LAN cable is crossover, if is not crossover use two cables with a switch between.
How this issue happen with your DM? After flashing an image?
Best regards,
Marc
Mate your using firefox to try connect to your 800 to flash with.
Tyr using Internet Explorer firefox can be temperamental .
Your in HTTP at that point so try IE and make sure all your PC's firewall are down.
Patch cable is the correct one to use with a router. crossover is needed for direct PC to 800 connection.
I take it you have tried another Ethernet cable ?