Erro1: no ca found

[roxy2642]

with enforcer i can see flash button and can select the image to flash. But the problem is after selecting it shows the status as calculating sum then nothing happen it doesn't start flashing

 

[roxy2642]

Dear bro thanks for giving me helping hand. but nothing changed with new method suggested by. the main issue is that its not loading the flash loader and doesn't show even http mode on box or either on dmup
its still showing the same message on led "error ca not found"
how to get rid of this plz suggest

 

[roxy2642]

yes i tried DreamUP 1.3.3.4 ,DreamUP 1.3.3.2 ,DreamUP_patched_by_forhike_and_natas with repair as well as enforcer.

actually flashed Oozoon yesterday with bl76c. everything was fine in package management there were some upgrades available along with addon. out of them was second stage bootloader also (which i suppose shouldn't cause the problem) it asked me image upgrade also i said no and upgraded some 2-3 programms.

after the restart its coming as error no ca found

plz help

 

[roxy2642]

Dear mR Ferret

Tons of thanks to u. i followed u and got rid of this problem. main problem was my serial cable was dead.

so got new cable all well

thak u so much

 

[Ferret]

Dear mR Ferret

Tons of thanks to u. i followed u and got rid of this problem. main problem was my serial cable was dead.

so got new cable all well

thak u so much

Your welcome mate pleased you sorted it. :thum:

 

[sombel]

hi all
i have dreambox 800HDse clone sim2.1 and i didn't arrive to flash it again. The facade just display me " stop" "dhcp" but didn't show an IP. Then i tried to flash with the sunray-flashup sim2&4 et it's wrote me " upload complete;waiting for acknowledge"
please help me

 

[Brummie]

i have just had an Error No CA with my 800se and i flashed it with sunray dreamup insert your lead and select COM3 press on connect when it says now switch on. then turn the power on at the back make sure you tick the use network box aswell then click on flash.

 

[Benkurd]

hi all
i have dreambox 800HDse clone sim2.1 and i didn't arrive to flash it again. The facade just display me " stop" "dhcp" but didn't show an IP. Then i tried to flash with the sunray-flashup sim2&4 et it's wrote me " upload complete;waiting for acknowledge"
please help me

if above did not work give new IP to your box

 

[alijam150]

THank you i follow your instructions and it went back to life. i had a bad experience. that tthe dreamup will read the dm800 but it does not flash it in the first part. the problem was the cable. i bought a new and it was fixed. for some reason it reads the dreambox but it does not flash it

 

[antoooon]

Try this method mate with the files from the link it will force the flash button to bacome active.

OK mate

Try this hacked DreamUP for clones

http://www.sat-universe.com/showthread.php?t=141826

To use

1. Connect you null cable to the 800 with no power supply connected.

2. Unpack the 2nd stage pack and go in to the folder named different method.

3. Start DreamUp and when it finds you 800 apply the power to the 800, ignore the error message you getting.

4. Now execute the enforcer.exe and press on enable.

You should now see the flash button and be able to select your image and flash it.

Ferret

I f*****g love you!!!!

Thank you:clapping:

 

[flyingpig]

rs232 dead!!!

Hi i have the same problem with ERR01 NO CA FOUND, after an accidental update of an oozoon image.
My issue is that my rs232 port on my dm800 clone was and is dead from the day i got it, so i guess i cannot repair the err01... with that.
Does anyone know if i can fix it through ethernet or jtag or usb or any other way except the rs232?

Thanks in advance

 

[Ferret]

Hi i have the same problem with ERR01 NO CA FOUND, after an accidental update of an oozoon image.
My issue is that my rs232 port on my dm800 clone was and is dead from the day i got it, so i guess i cannot repair the err01... with that.
Does anyone know if i can fix it through ethernet or jtag or usb or any other way except the rs232?

Thanks in advance

I dont thinks you can mate.

I would look into trying to repair the rs232 port take the mobo out of the 800 and look for dry joints etc

 

[flyingpig]

I dont thinks you can mate.

I would look into trying to repair the rs232 port take the mobo out of the 800 and look for dry joints etc

Man i have had this problem once 6 months ago and managed to get to STOP and ip, with unplugging and replugging the power multiple times while holding the stand by button on the screen. Then i could flash it through the browser.
I cant seem to remember the extact way i did it though. :mecry:

 

[Ferret]

Man i have had this problem once 6 months ago and managed to get to STOP and ip, with unplugging and replugging the power multiple times while holding the stand by button on the screen. Then i could flash it through the browser.
I cant seem to remember the extact way i did it though. :mecry:

Thats the method for flashing via browser mate as you say nothing to do with the rs232 port which you use a null modem cable on.

 

[Benkurd]

Hi i have the same problem with ERR01 NO CA FOUND, after an accidental update of an oozoon image.
My issue is that my rs232 port on my dm800 clone was and is dead from the day i got it, so i guess i cannot repair the err01... with that.
Does anyone know if i can fix it through ethernet or jtag or usb or any other way except the rs232?

Thanks in advance

Take Ferret(s) advice mate :thum:
hope you going to sorted

 

[flyingpig]

Thats the method for flashing via browser mate as you say nothing to do with the rs232 port which you use a null modem cable on.

Yes i know but im stuck in ERR01 no ca found and cant enter the STOP ip mode. Its just goes there when i plug it in. I had succeeded though once in the past with the power plug trick i said before but no luck now!!:mecry::mecry::mecry:

I dont care to fix the faulty rs232 as long as i get to flash a working image.

 

[Brummie]

without the rs232 port working you might aswell throw it in the bin,because thats the only way you are going to fix it,are you sure you have a null modem cable and not a serial cable,a serial cable will not work it must be a null modem cable.

i would take ferrets advise and try fix the port.

 

[flyingpig]

without the rs232 port working you might aswell throw it in the bin,because thats the only way you are going to fix it,are you sure you have a null modem cable and not a serial cable,a serial cable will not work it must be a null modem cable.

i would take ferrets advise and try fix the port.

im sure its null ive tested it on another dreambox and works great

 

[enbm]

I have same problem, but ican't fix whit describe method. please help

 

[limkkheng]

Maybe you can try this tool:
http://www.sat-universe.com/showthread.php?t=212682