E2 with uk cable

J

jamie-warez

VIP
Messages
700
I am on Ex Telewest south lanarkshire

As far as i know only 5a01 was used. the cam is looking for 5b01
gets valid keys for 5a01 and 5b01 but only 5a01 shows up in my softcam file

With the emu on au it gets keys for 5a01.



Here is output from consol with softcam Not network cam...

Code: 
tuxbox mgcamd v1.31 by mixvt (compiled Oct 27 2008 23:09:59)
[mg] Net:1:7:2:5s Show ecm:1, emm:1 Up:0 Au:1 Dir:0 Osd:no:80:2 Cache:7 Log:2:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: ipbox9000
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or directory
[config] newcamd route = ip9000:127.0.0.1:32100
[config] newcamd route = ip9002:127.0.0.1:32101
newcamd keep alive: 300, incoming port: 0
[NLB cuberevo data]$ [mgcam] emm thread started
[mgcamd] tps update started.
/var/keys/tps.bin error 2: No such file or directory
[newcamd] Connecting to 127.0.0.1:32100...
[newcamd] Connecting to 127.0.0.1:32101...
[mg0] service 4A0 index 0 pmt pid 0 (1)
[newcamd] Login to 127.0.0.1:32100 as ip9000 accepted (10ms)
[newcamd] Login to 127.0.0.1:32101 as ip9002 accepted (0ms)
[newcamd] Card data from 127.0.0.1:32100 (12ms):
        EMM enabled: UA yes SA yes GA yes, Card serial: 0
        Userid 1 caid 0 providers 1
        Idents: 000000
        ids: 0

[newcamd] Card data from 127.0.0.1:32101 (7ms):
        EMM enabled: UA yes SA yes GA yes, Card serial: 0
        Userid 1 caid 0 providers 1
        Idents: 000000
        ids: 0

 ECM: CaID: 0x1800  -> CaPID: 0x198D ProvID: 000000
[mg0] Mon Mar 30 02:35:14 2009
===== Nagra ECM on CaID 0x1800, pid 0x198d ======
prov: 005B01 pkey: 00 = 00.00.00.00.00.00.00
cw0:0 00.00.00.00.00.00.00
cw1:0 00.00.00.00.00.00.00
mecm failed
[mgcamd] emm started
*EMM: CaID: 0x1800  -> CaPID: 0x0025 ProvID: 000000
NAGRA: Got keys for 5a01 ROM7
[emm] Mon Mar 30 02:35:15 2009
===== N EMM on pid 0x25 ======================
prov: 005A01 key 00 = 00.00.00.00.00.00.00
[emm] Key found, not updating
[emm] Mon Mar 30 02:35:15 2009
===== N EMM on pid 0x25 ======================
prov: 005A01 key 01 = 00.00.00.00.00.00.00
[emm] Key found, not updating
you can see the ident is 5a01 and 5b01

The keys showup in th softcam.key as 5a01


I HAVE REMOVED ALL KEYS FROM THE POST AND REPLACED WITH 0.0.0.0.0.0 I AINT SURE ON THE RULES HERE....
 
Last edited:
K

k2k2000

Registered
Messages
727
ok ,if cam looking for 5a01
try with this
open sbcl.ini
and remplace
Code: 
TCPNcdPrvs=00180000010000062CE9320200[B]5C01[/B]000000000000000000[B]5D01[/B]00000000000000000000
with
Code: 
TCPNcdPrvs=00180000010000062CE9320200[B]5A01[/B]000000000000000000[B]5B01[/B]00000000000000000000

+ ADD to the end of sbcl.ini
Code: 
[ECM3]
Descr=NTL Digital Cable3
CAID=1800
PrvID=5A01
Pattern=xx xx xx xx xx xx
Match=0

[ECM4]
Descr=NTL W/Digital Cable4
CAID=1800
PrvID=5B01
Pattern=xx xx xx xx xx xx
Match=0

restart sbcl
 
J

jamie-warez

VIP
Messages
700
I would like to say a big thanks to k2k2000...:yourock:

When all others failed he came up with the goods Thanks for sticking with me my friend.
I have ordered a cheap Dragon 4.1 cam so i can use it with my subbed sat card my old Dragon cam that was used before gave up the ghost Rom is dead cant flash it. the cheapest way is to get a T-REX / Dragon 4.1.
 
Last edited:
You must log in or register to reply here.
Top