BBC Satback Package has Launched on Telstar 12 Vantage @ 15°west

patacolas

Registered
Messages
6
Does any channels list have the correct settings for py3?
I'm using ciefp settings which work fine in py3. But 15W satback channels need to be added manually.

For example:

Channel 4 HD 27.5W - already included in ciefp settings
Code:
4500:0cfdace7:1000:0001:25:0:0
Channel 4 HD
p:Channel 4 Broadcasting,c:00189d,c:03189d,c:050001,c:0918a10101,c:100004,c:111a2e,c:12189e,C:2600,f:5

Channel 4 HD 15W - code edited after channel scan
Code:
4500:0d7a0000:1000:0001:25:0:0
Channel 4 HD
p:Channel 4 Broadcasting,c:00189d,c:03189d,c:050001,c:0918a10101,c:100004,c:111a2e,c:12189e,C:2600,f:5


In addition, you must enter the correct keys for 15W satback in oscam
 

EnoSat

Senior Member
Messages
1,978
Does any channels list have the correct settings for py3?
yes
 

kegnkiwi

Super VIP
Donating Member
Messages
887
I'm using ciefp settings which work fine in py3. But 15W satback channels need to be added manually.

For example:

Channel 4 HD 27.5W - already included in ciefp settings
Code:
4500:0cfdace7:1000:0001:25:0:0
Channel 4 HD
p:Channel 4 Broadcasting,c:00189d,c:03189d,c:050001,c:0918a10101,c:100004,c:111a2e,c:12189e,C:2600,f:5

Channel 4 HD 15W - code edited after channel scan
Code:
4500:0d7a0000:1000:0001:25:0:0
Channel 4 HD
p:Channel 4 Broadcasting,c:00189d,c:03189d,c:050001,c:0918a10101,c:100004,c:111a2e,c:12189e,C:2600,f:5


In addition, you must enter the correct keys for 15W satback in oscam
Thank you patacolas this may sound a basic question but what file would I need to alter. I am assuming it's not the softcam but is it something like lamdb or something?
 

patacolas

Registered
Messages
6
Thank you patacolas this may sound a basic question but what file would I need to alter. I am assuming it's not the softcam but is it something like lamdb or something?
Ciefp settings don’t have 15W satback channels. So, after a normal transponder scan, you need to edit lamedb file.
You can copy 27.5W data to the 15W scanned channels as in example.
 

dave1234

Registered
Messages
54
So am I right in thinking that if you have a TM 5402 all you need to do is enter the correct BISS code and you are there, or do you have to edit Pids etc as well ?
 

barney115

Donating Member
Staff member
Administrator
Messages
24,765
Just add CCW Key there is No BISS codes Never was any .
do you have to edit Pids etc as well ? NO just scan TP only .
 

asenna

Registered
Messages
19
Kabelio 15 west
Can bbc itv channels etc be received in southern Spain / Portugal ?

My location is about 20km south of Lisbon, I can see them if the weather is good, using a 1.20m antenna. In the extreme south of the country you need a bigger dish, maybe 1.80m or more!
My signal in a good day is 42% and can have some glitches/pixelization if drops below 35%.
Only the two Espn channels arrives strong 24/7 on 15W
 
Last edited:

manic01

Super VIP
Messages
2,515
My location is about 20km south of Lisbon, I can see them if the weather is good, using a 1.20m antenna. In the extreme south of the country you need a bigger dish, maybe 1.80m or more!
My signal in a good day is 42% and can have some glitches/pixelization if drops below 35%.
Only the two Espn channels arrives strong 24/7 on 15W
% only count if same receivers used in test?
 

satellitestuff

Registered
Messages
46
Just been messing around with an old dish and Freesat (GTMedia) receiver and noticed that when blind scanning, the channels now scan in on 15w. UTV seems to scan in without showing an encryption flag, oddly. The channels at 27.5 still don't show up when scanning.
 

SATIG

Registered
Messages
14
1-0-19-4440-1000-1-D7-AAB22-0-0-0.jpg


In Portugal looks FTA.
 
Last edited by a moderator:
Top