[B]Release Notes - version 0.9.1086[/B]
1. Becareful! All channels will be removed after updating
A. Channel structure is changed
2. New OpenXCAS API is available
A. SmartCard Interface is added (reference HXOpenXCAS_Sample)
B. Managed by GUI(Install/Uninstall, Enable/Disable, Set priority)
- for changing server address, edit /EMU/OpenXCAS/addon.conf
CAMD_MY_SERVER for Cam1.tgz
CAMD_SERVER_1 for Cam2.tgz
CAMD_SERVER_2 for Cam3.tgz
CAMD_SERVER_3 for Cam4.tgz
- for example,
If you set CAMD_MY_SERVER as "http://azupd.com", Samples will be installed when you select CAMD_MY_SERVER from GUI
If you set CAMD_SERVER_1 as "http://azupd.com", MultiCas will be installed when you select CAMD_SERVER_1 from GUI
If you set CAMD_SERVER_2 as "http://azupd.com", gCam will be installed when you select CAMD_SERVER_2 from GUI
C. Debug message on/off
D. Time debug message is added
E. Improved PMT, ECM return time
3. Fix bug about AC3 audio
A. Please check ac3 audio output after 1 or 2 hours
B. ProLogic is not supported yet
4. Movie Player
A. Fix bug about SRT subtitle(disapper after 1 hours)
B. Test results of some contents
a. File name; Matrix.Reloaded.Trailer-640x346-XviD-1.0beta2-HE_AAC_subtitled.mkv
- Video is somtimes broken( Popcorn has same problem)
b. File name; Matrix.Reloaded.Trailer-RV9-Karl640x432_HE_AAC_subtitled_chapters.mkv
- Not supported(Poscorn has same problem)
c. File name; big_buck_bunny_1080p_h264.mov
- Good
d. File name; big_buck_bunny_1080p_stereo.avi
- Not supported(Popcorn can decode audio only)
e. File name; big_buck_bunny_1080p_surround.avi
- Video is sometimes broken(Popcorn doesn't have any problem. I am debugging on it)
f. File name: big_buck_bunny_1080p_stereo.ogg
- Not supported(Poscorn has same problem)
5. Recording CAS Channel(if EMU can support 2 stream)
6. Timer is added
7. You can use a drop down list for changing video resolution
8. DEL/BACK and CAPS/NUM to history navigation at TV Mode
http://rapidshare.com/files/184128112/TD210_Patch_0.9.1086.rar.html
Ich habe da was für den Install des EMU gefunden.
1 - extract the files.rar
2 - Put them in /EMU through ftp
3 - Set 755 for :
A - emu_module ( it's in Multicas )
B - openxcas.conf ( it's in openxcas )
C - sample_module ( it's in Samples )
D - addons.conf ( it's in EMU )
Now reboot, your cardreader is working now if all rights are set correct, just select menu ( not home! ) then on the bootom cas module and then cas settings and select encryption.
Now for Incubus:
Add incubusCamd.sigma, incubusCamd.conf and incubusCamd.prio to:
/EMU/openxcas
set 755 for all 3 files
Edit openxcas.conf so it show this :
Quote:
[modules]
count = 1
active_auto = false
active_1 = incubusCamd
[module_1]
name = incubusCamd
path = EMU/openxcas
daemon = incubusCamd.sigma
version = 1.00
Then add serverline (twice) to incubusCamd.conf
Reboot box then log in with telnet and do the following commands:
cd /EMU/openxcas (enter)
./incubusCamd.sigma (enter)
For start-up on reboot I did the following
( WARNING!! DO AT YOUR OWN RISK!!!!!!)
S.sh contains the start-up commands so we need to add the command there, but............... it's read-only so we need to make it RW:
1 - Login with telnet.
2 - give command:
Quote:
mount -o remount,rw -t ext3 /dev/hda1 /MMP
3 - Now you can edit with you're favourite editor the S.sh file, add the follwing on the bottom of the file
Quote:
sleep 10
cd /EMU/openxcas
./incubusCamd.sigma
Now reboot and Incubus will start @boot.
Thanks klick
[B]Release Notes[/B]
[B]Fixed[/B]
- Support some high-bitrate contents
- Bugs on playing WMV with WMAPRO
- WMV file in media player cause box hang up, and need reboot
- Size of subtitles not saved
- |<< and ****| should change song
- TXT subtitles that don¡¯t work (mpl2 and tmplayer)
- << and **** not working, it should be more intuitive, One press should
make advance just few seconds, if keep pressing button more faster
- RSS don't work at some link:
ht_p://servis.idnes.cz/rss.asp?c=zpravodaj
ht_p://serwisy.gazeta.pl/rss/0,0.html <-- Not RSS site
ht_p://rss.gazeta.pl/pub/rss/gazetawyborcza_swiat.xml
ht_p://rss.gazeta.pl/pub/rss/gazetawyborcza_nauka.xml
ht_p://rss.gazeta.pl/pub/rss/gazetawyborcza_kraj.xml
- Input of password for WEP is extended to 256 digit
- Example, i make scan at One TP that don0t exist on table (let's say
Hellas Sat 10956 V) i scan it, appear message Save channels i plug
YES, than he returns back to menu of scan i make exit, and i scan
another TP, scan is OK or failed, and i go back to TV Mode to watch
channels that i scan on first, but when i p*ick they i got "NO SIGNAL"
message, like if TP infos (S/R, FEC, PID's... are lost on STB).
- User should add new frequency on EDIT menu
- SR and transponder mHZ should have only 5 input fields and not 6
- When Go to TV Channel Menu, and press some Scan option, go first to
satellite that are used at moment. Now all times goes to 4.0E channels,
so if i have dish at Hispsat Dish starting moving uneseraly
[B]Added[/B]
- SSlovenian and French OSD
- User can capture the snapshot of TV using the "CHECK" key on REMOTE
- WPA-PSK and WPA2-PSK on Wireless LAN
- drivers(usbserial.ko & ftdi_sio.ko) for Infinity USB smart
- User defined shell which not be overwritten after upgrading firmware
- You can find the sample shell script in /DISK2/etc/start.d/
- At satellite list be possible sort by Position (0¨¬E to 260¨£E) and by Satellite name
http://rapidshare.com/files/220164526/patch_1759.rar