as you configure the key biss with oscam?

[chelo71]

http://www.sat-universe.com/showpost.php?p=2036758740&postcount=2525

 

[digi247]

You need Oscam-Emu or similar to run Biss/Tandberg etc..

 

[juli13]

http://www.sat-universe.com/showpost.php?p=2036758740&postcount=2525

To run biss keys you can use the normal oscam, it support biss keys. You don[t need oscam emu for this.

Rename the softcam.key to constant.cw which should have valid biss keys and put it to usr/keys

Add this reader to oscam.server

[reader]
label = biss
protocol = constcw
device = /usr/keys/constant.cw
group = 1


that all.

 

[zoobihoobi]

Hi,

I did the same but it does not work.
I have wetek play with Enigma 2 openpli image. I was using pbnigma image previously and using oscam emu to open biss keys channels and it was working fine

When I installed oscam for openpli, there was no such option for Oscam emu, so I installed only Oscam from plugin download option and did the same what you mentioned.

Changed the softcam.key file to constant.cw and add reader in oscam.server file.

When I go to webinterface of oscam. I can see Biss reader is green and working but strange thing is that when I go to constant.cw file using oscam webinterface. It shows there is no file. Although I can see constant.cw file in usr/keys folder through filezilla application.

There must be something going wrong which preventing the channel opening.

 

[Rickk]

constant cw format adapted?
caidrovider:sidmt:ecm::key (16 Bytes seperated by spaces)
example:
1234:123456:1234:2345:3456::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

 

[zoobihoobi]

That might be the reason.

Here is the key line from softcam.key file under BISS

F 00041FFF 00 F7E9A7001957CD00 ;PTV Sports (38E)
F 00041FFF 01 F7E9A7001957CD00 ;PTV Sports (38E)


Any idea how to convert into cw adopted format

 

[zoobihoobi]

Hi,

I searched from the net and use below in constant.cw file

PTV Sports (38.0E)
TP: 04004 V 03333 3/4 Paksat 1R/DVB-S/MPEG-2/PTV NETWORK, 4 607 Kbps
CaID= 0x2600 SID= 0x0001 VPID= 0x0021 APID= 0x0024 PMT= 0x0020 PCR= 0x0021 TID= 0x0001 NID= 0xFFFF ProvID= 0x000000 ECM PID= 0x1FFF
HEX: F7 E9 A7 00 19 57 CD 00
DEC: 018 157 236 204 035 252 117 204Kod: You are not allowed to view links. Register or Login*


*For CCcam-Newcamd & Oscam (constant.cw):
2600:000000:0001:0020:1FFF::F7 E9 A7 00 19 57 CD 00 F7 E9 A7 00 19 57 CD 00 ;PTV Sports (38.0E)

Not sure it is correct or not

 

[Rickk]

2600:000000:0001:0020:1fff::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

 

[zoobihoobi]

2600:000000:0001:0020:1fff:00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

So I remove all text from constant.cw file and just paste below line as per your instruction with correct key but channel is still not opening

2600:000000:0001:0020:1FFF::F7 E9 A7 00 19 57 CD 00 F7 E9 A7 00 19 57 CD 00 ;PTV Sports (38.0E)

 

[zoobihoobi]

The strange thing which might causing the issue is that when I go to Oscam webinterface, I can see BISS reader is active and green and showing protocol constcw and file location is also correct usr/keys/constant.cw

But when I go to files section in Oscam webinterface and I click on constant.cw from drop down of other files.
It shows "File does not exist or no file selected!"

whereas I can see constant.cw file in usr/keys folder through filezilla

My constant.cw is like this


2600:000000:0001:0020:1FFF::F7 E9 A7 00 19 57 CD 00 F7 E9 A7 00 19 57 CD 00 ;PTV Sports (38.0E)

 

[Rickk]

in the key area

PTV SPORTS Paksat (38.E)
TP: 4005 V 15550
SID:0004 / VPID:0203
Date 23/02/2017

and another key

 

[zoobihoobi]

in the key area

and another key

Did not get your point
Do you mean, do I need to add in constant.cw file

 

[0-f-F-e]

2600:000000:0001:0020:1fff::00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

[B]without VPID's:[/B]
             [COLOR="Red"]constant CW file format:[/COLOR]
        2600 CAID (4 digits):
      000000 ProvID (6 digits):
        0028 SID      (4  digits):
        0102 PMT PID    (4 digits):
        1FFF ECM PID      (4 digits)[COLOR="Red"][B]::[/B][/COLOR] 
             key            (16 Bytes separated by spaces)

[B]EXAMPLE:[/B]
[COLOR="Blue"]2600:000000:0028:0102:1FFF[COLOR="Red"][B]::[/B][/COLOR]A1 XX XX XX XX XX XX XX XX XX XX XX XX XX XX B1[/COLOR]

[B]with VPID's:[/B]

             [COLOR="red"]constant CW file format:[/COLOR]
        2600 CAID (4 digits):
      000000 ProvID (6 digits):
        0028 SID      (4  digits):
        0102 PMT PID    (4 digits):
        1FFF ECM PID      (4 digits): 
        [COLOR="Teal"]008D[/COLOR] VPID           (4 digits)[COLOR="red"][B]:[/B][/COLOR]
             key            (16 Bytes separated by spaces)

[B]EXAMPLE:[/B]
[COLOR="Blue"]2600:000000:0028:0102:1FFF:[COLOR="Teal"]008D[/COLOR][COLOR="red"][B]:[/B][/COLOR]A1 XX XX XX XX XX XX XX XX XX XX XX XX XX XX B1[/COLOR]

 

[zoobihoobi]

Little bit confused now.

Did not get what Rickk is said, Do I need to add following in constant.cw file.


PTV SPORTS Paksat (38.E)
TP: 4005 V 15550
SID:0004 / VPID:0203
Date 23/02/2017

and Also confused with shishmish post.
So do I need to add VPID for PTV sport in my constant.cw file.

 

[zoobihoobi]

What I understood after going through the post again.
I updated SID and VPID in my constant.cw file.
Now my constant.cw file looks as follow:

PTV SPORTS Paksat (38.E)
TP: 4005 V 15550
SID:0004 / VPID:0203
Date 23/02/2017

2600:000000:0004:0103:1FFF:0203::F7 E9 A7 00 19 57 CD 00 F7 E9 A7 00 19 57 CD 00 ;PTV Sports (38.0E)

But channel is still not opening
I tried with VPID and without VPID but no success.

 

[0-f-F-e]

What I understood after going through the post again.
I updated SID and VPID in my constant.cw file.
Now my constant.cw file looks as follow:

PTV SPORTS Paksat (38.E)
TP: 4005 V 15550
SID:0004 / VPID:0203
Date 23/02/2017

2600:000000:0004:0103:1FFF:0203::F7 E9 A7 00 19 57 CD 00 F7 E9 A7 00 19 57 CD 00 ;PTV Sports (38.0E)

But channel is still not opening
I tried with VPID and without VPID but no success.

again - see red two point

2600:000000:0004:0103:1FFF:0203:F7 E9 xx 00 xx 57 xx 00 F7 xx A7 xx 19 xx CD 00

 

[Rickk]

you must attend and read
make a log of the oscam start

 

[zoobihoobi]

Thanks, you ppl are trying your best to get this working but somehow it does not work.

Can you tell me how to prepare log and share with you ppl.

 

[zoobihoobi]

https://pastebin.com/8LTn9rV6Here it is

 

[Rickk]

this is not a real log
go to the webif and restart oscam
under live log save log from reboot
whether all reader and emu starts correctly