PowerVu Chat [only chat, don‘t post keys here]

D

Diman

Registered
Messages
31
Why when i watch bwtv for example. when i switch to other not powervu channels (digiturk or ssr or any other wich i can watch with sharing csc) they don't work until i restart altdvb? And then i can watch them until i switch again on powervu enabled channels?
 
barney115

barney115

Donating Member
Staff member
Administrator
Messages
24,860
LOOKS Like AFN Is Down Already on 9 East ???
cant open nothing on it tonight
i try 5 East SiS betting channels and all open ok

can anyone confirm AFN 9E works or not still right now ??
Thnx
 
G

gotya

Moderator
Messages
7,200
barney2222 said:
LOOKS Like AFN Is Down Already on 9 East ???
cant open nothing on it tonight
i try 5 East SiS betting channels and all open ok

can anyone confirm AFN 9E works or not still right now ??
Thnx
Click to expand...

Yes it's black screen here :mad:

the key is changing in the vplug but nothing show
 
D

dale_para_bajo

Well Known Member
Messages
646
ja888.53 said:
I plan to connect the receiver cable to the computer via RS232 SBCL (http://www.sat-universe.com/showthread.php?t=207836&page=10)
Click to expand...

You did not responded me. I can not help you like that. That link has a last post of September/last year. My best guest is that sblc has not been updated to handle powervu. What type of selection you do for serial in sblc I guess sssp? That I know sssp handle only on set of dcws I will not expect it will work.

You did not responded what type of receiver you have and if you know for a fact that DES decrypt capable and is enabled! That folder is on a "Arion-Ferguson-Openbox". good Luck budy
 
D

Diman

Registered
Messages
31
Can someone tell me it's only my problem that after turn on powervu enabled channel i have to restart altdvb before watch other emu enalbed (viacess, cryptoworks) and cardsharing channels? No one has the same issue?
 
D

dale_para_bajo

Well Known Member
Messages
646
laaraj11 said:
1)bwtv.ts is a record of bwtv : Hotbird 13°E - 11054 H 27500
VPID = 0xD2
APID = 0xC8
ECM PID = 0x17B6

2)I use vlc to record the ts stream from my vuplus and I use LastDrakkar for the ECM data
Click to expand...

@laaraj11
No buddy answered for a good logger. Anyway I think your LastDrakkar can do the magic. You do not said what is your setup but from the FAQ I see that LastDrakkar is normally use with Linux receivers. And That the receivers have installed dvbsnoop. I am amusing that is your setup. Now what I do not understand is then how you are using the VPLUG for powervu?? And then see it in VCL? Do not tell me that you are in fact using oscam?


Or you in fact you are using a PCSAT? But I can not find the settings in LastDrakkar to be used for a PCSAT?

Please tell me you setup.

Anyway When you log ECMS can you please Select "BIN File on HDD" instead of TXT. I think that will store the RAW ECM.

I will apreciate if you can logs some
 
L

laaraj11

Registered
Messages
23
here is my setup :
-pc :
windows 7 32bit
vlc player installed

-receiver:
vuplus solo
blackhole 2.1.4
dvbsnoop installed
openwebif installed

from my browser i can use openwebif to stream the current channel ! that generate a m3u file that i can open with vlc player (on pc).
i then use vlc to record the stream (evenif ecrypted)!
NB :
-i do not use a PCSAT
-i do not use vplug, but i use powervuSPC.mdl to decrypt offline the ecms using a tool named "ECM ANALYSER" of our friend Night_Wolf1619 !

next time i will store the "raw ecm" . right now i can't.

:)
dale_para_bajo said:
@laaraj11
No buddy answered for a good logger. Anyway I think your LastDrakkar can do the magic. You do not said what is your setup but from the FAQ I see that LastDrakkar is normally use with Linux receivers. And That the receivers have installed dvbsnoop. I am amusing that is your setup. Now what I do not understand is then how you are using the VPLUG for powervu?? And then see it in VCL? Do not tell me that you are in fact using oscam?


Or you in fact you are using a PCSAT? But I can not find the settings in LastDrakkar to be used for a PCSAT?

Please tell me you setup.

Anyway When you log ECMS can you please Select "BIN File on HDD" instead of TXT. I think that will store the RAW ECM.

I will apreciate if you can logs some
Click to expand...
 
A

andy6

Member
Messages
56
barney2222 said:
LOOKS Like AFN Is Down Already on 9 East ???
cant open nothing on it tonight
i try 5 East SiS betting channels and all open ok

can anyone confirm AFN 9E works or not still right now ??
Thnx
Click to expand...

are you getting any signal on it barney

no signal on it here level 95% Q 0


ignore that I have got a signal on it now 83% black screen
 
Last edited:
barney115

barney115

Donating Member
Staff member
Administrator
Messages
24,860
andy6 said:
are you getting any signal on it barney

no signal on it here level 95% Q 0


ignore that I have got a signal on it now 83% black screen
Click to expand...
YES AFN Signal is just fine but keys must have changed since AFN 9 EAST Is Down :mecry: :mad:
i guess this PowerVu Hack already is pretty much finished before it started ?? :eek: :mad:
 
S

sathak

Registered
Messages
4
PowerVU EMU

The channels encoded PowerVU become available for viewing on the receivers Openbox S2 / S2 mini (chipset Ali 3606C).





S / W will be available after the test ..
 
barney115

barney115

Donating Member
Staff member
Administrator
Messages
24,860
sathak said:
The channels encoded PowerVU become available for viewing on the receivers Openbox S2 / S2 mini (chipset Ali 3606C).


S / W will be available after the test ..
Click to expand...
AND What About AFN Network 9°EAST ??? :confused: :confused:
 
S

sathak

Registered
Messages
4
AFN stopped working early this morning, you can see the shift key .. By the way, can someone tell me who and where puts fresh key for powerVU ??
 
A

AHMAD ALBAHETH

Senior Member
Messages
166


The Postman said:
not working for me :mad:
Click to expand...


try this Repack for testing

PowerVu.ini Updated and modified by MaRwAn26

hWni09H.png






​
 
D

dale_para_bajo

Well Known Member
Messages
646
laaraj11 said:
here is my setup :
-pc :
windows 7 32bit
vlc player installed

-receiver:
vuplus solo
blackhole 2.1.4
dvbsnoop installed
openwebif installed

from my browser i can use openwebif to stream the current channel ! that generate a m3u file that i can open with vlc player (on pc).
i then use vlc to record the stream (evenif ecrypted)!
NB :
-i do not use a PCSAT
-i do not use vplug, but i use powervuSPC.mdl to decrypt offline the ecms using a tool named "ECM ANALYSER" of our friend Night_Wolf1619 !

next time i will store the "raw ecm" . right now i can't.

:)
Click to expand...

That is very nice., Many will benefit from your experience. Listen I had read this tread an apart from some very first post that claim one or two receivers could do powervu no body with STB had post a working solution.


I still have some general question.
vuplus solo, blackhole 2.1.4 - I did ask previously is the suggested name "vu+" had something to do with powervu. In fact blackhole description reads "Cryto System ... PowerVu (by Ev0)"

No body answer at that time, but from what you are saying it does not do internal DES decryption of Video/Audio.

Hey Listen for sharing your great experience. So apart from the DM800 tuner solution been offered for may,15 your is the first one to confirm a STB work around. So some linux boxes have a chance.


So I started searching for ; powervuSPC.mdl and "ECM ANALYSER" of our friend Night_Wolf1619. I guess it should be in this forum. I am interested in this ECM Analyzer that can do powervu. Seems a nice to have tool.
 
You must log in or register to reply here.
Top