PowerVu Chat [only chat, don‘t post keys here]

[rocSTEADY]

I sent you a PM.

both of them worked like a charm! thanks!

 

[Serhi]

Please new key sony network 66E 3845H30000

 

[dank]

Does anyone have VU + Solo2 running without stream relay? I updated my Solo2 with Openpli 6.0 and put the new 07/11 drivers but only opened a tp without stream relay. I also tried with OpenATV 6.1 that already comes with the new drivers but also just opened the same TP.

 

[Ferret]

Does anyone have VU + Solo2 running without stream relay? I updated my Solo2 with Openpli 6.0 and put the new 07/11 drivers but only opened a tp without stream relay. I also tried with OpenATV 6.1 that already comes with the new drivers but also just opened the same TP.

100% works mate

Has to be you oscam setup or the keys in your softcam.key

 

[BRSat]

Something strange is happening today with 65W and 75W. Powervu EMU 2.8 (DVBDream) find the Keys for 75W but can't open the channels. It opens 65W fine. Also, Freesat V7 can open both sats, but in 75W I need to shut it down and on again for the 75W to open. Is it happening to anyone else?

 

[Serjoga]

Does anyone have VU + Solo2 running without stream relay? I updated my Solo2 with Openpli 6.0 and put the new 07/11 drivers but only opened a tp without stream relay. I also tried with OpenATV 6.1 that already comes with the new drivers but also just opened the same TP.

I not understund works or not works Powervu from satellite?

If not works, change in oscam files this line extended_cw_api = 2
to extended_cw_api = 1

 

[kebien]

Something strange is happening today with 65W and 75W. Powervu EMU 2.8 (DVBDream) find the Keys for 75W but can't open the channels. It opens 65W fine. Also, Freesat V7 can open both sats, but in 75W I need to shut it down and on again for the 75W to open. Is it happening to anyone else?

I assume you are talking about Globosat trasponders.
It is most probably you,and not the feeds,but in case is a provider problem,everyone would be experiencing the same.
If powervuemu monitor is showing good decryption,the codecs might be the problem.
The best you can do is to record a FULL TS and post it for others to analyze,and don't forget to post ECM keys so people can decrypt it in order to analyze it.

 

[iq180]

I assume you are talking about Globosat trasponders.
It is most probably you,and not the feeds,but in case is a provider problem,everyone would be experiencing the same.
If powervuemu monitor is showing good decryption,the codecs might be the problem.
The best you can do is to record a FULL TS and post it for others to analyze,and don't forget to post ECM keys so people can decrypt it in order to analyze it.

I have the working EMM keys for it, if it will help, 65.0w and 75.0w is out of my foot print so I can't record TS/data stream.

 

[BRSat]

I assume you are talking about Globosat trasponders.
It is most probably you,and not the feeds,but in case is a provider problem,everyone would be experiencing the same.
If powervuemu monitor is showing good decryption,the codecs might be the problem.
The best you can do is to record a FULL TS and post it for others to analyze,and don't forget to post ECM keys so people can decrypt it in order to analyze it.

Yes, Globosat. I have the EMMs and they are working on Powervu EMU 2.8 at the 65W sat. They autoroll and open the mux. On 75w, they autoroll and give me two ECM Keys, but Powervu EMU can't open the mux. It gives me this:

81 30 3D 50 37 20 0E 00 E6 00 00 14 B0 00 53 80 B3 82 14 C7 DF 24 B1 94 21 A6 DC 84 6C 0A 10 00 00 EF 08 C4 CB 10 BC 7B 6D CB B9 27 00 7E 91 AB 95 D1 DC 92 47 13 19 BE 67 7C 36 7F 40 FE 46 0D

PowervuECM -> Failed. The in use P 0A10 01 Key Or P 0A1002620264 Key is invalid.

The funny thing is that with the same EMMs, the 75W is opening on a STB that I have. Very strange.

 

[iq180]

Yes, Globosat. I have the EMMs and they are working on Powervu EMU 2.8 at the 65W sat. They autoroll and open the mux. On 75w, they autoroll and give me two ECM Keys, but Powervu EMU can't open the mux. It gives me this:

81 30 3D 50 37 20 0E 00 E6 00 00 14 B0 00 53 80 B3 82 14 C7 DF 24 B1 94 21 A6 DC 84 6C 0A 10 00 00 EF 08 C4 CB 10 BC 7B 6D CB B9 27 00 7E 91 AB 95 D1 DC 92 47 13 19 BE 67 7C 36 7F 40 FE 46 0D

PowervuECM -> Failed. The in use P 0A10 01 Key Or P 0A1002620264 Key is invalid.

The funny thing is that with the same EMMs, the 75W is opening on a STB that I have. Very strange.

It was reported to me today that the Emm keys were working on the freesat V7 and V8 for 65.0w and 75.0w.

 

[Pete2k]

Anybody with access to Intelsat 18 can you let us know if the 3 channel AFN DTS mux is working now that it has switched to dvbs2 and HD?

 

[Serjoga]

MTN package works on 20W or only on 57E?

 

[ParsianSat]

MTN package works on 20W or only on 57E?

It works at 20W. So I confirm it. :thum:

 

[ReMy_Tr]

20W works thanks..

 

[GlobalSat]

with which key working softcam key tell me I have Amiko alien 8900

 

[BRSat]

It was reported to me today that the Emm keys were working on the freesat V7 and V8 for 65.0w and 75.0w.

Thanks, I know. 75W is not working with PorwerVU EMU.

 

[iq180]

Thanks, I know. 75W is not working with PorwerVU EMU.

I sent you a PM, test and let me know.

 

[Forsat]

Anybody with access to Intelsat 18 can you let us know if the 3 channel AFN DTS mux is working now that it has switched to dvbs2 and HD?

Yes. Switched to DVBS2, but is not HD (only SD, up to 576p). Change frequency to 4175 L 11000, only added new 4 radio channel from AFN. But, AFN is still open with EMU, after change frequency.

 

[Serjoga]

on 20W works only few channels I test all who foud +-40 but TFC and sport 24 not works...I have correct keys, but Video and Audio Pid is 0....????

 

[arkanoid9]

on 20W works only few channels I test all who foud +-40 but TFC and sport 24 not works...I have correct keys, but Video and Audio Pid is 0....????

i have right pids but with the right keys i can open only MTN intl and bbcworld of the freq 12509 H SR2081... Sport24 nothing.....