****NEW COBRA1423 IMAGES FOR CLONE SSL84B SIM 2.01 & 2.10

[dsbfidda]

Hi cobra1423, format ok usb no hdd, after ipk file loads first thing I get is lots package errors (shows as no architecture I think)then get unpacking files. Leave till end DONE message around 10 minutes then use Finish. If do not reboot here then picture will show after another 5 or 6 minutes. Switch off-on then image starts to load then screen goes blank with red led flashing - went for shower came back and still blank.

Loading V00.2 just now to check system and will try V00.3 again and post actual package error messages I get at second step in next 1/2 hour or so.

Update V00.3 - error message as I remembered above - ie

leave till complete & DONE message and around another 8 minutes bbc1 loaded ok.

Switch off box and back on and image starting to load as seen on dm display - red led flashing - spidey on screen - dm display now blank - led flashing - spidey on screen - waiting...... will leave for 10 minutes to see what happens......

Update - nothing happens - back to old image me thinks..

 

[skydive80]

My external harddrive is 1.5tb, is this normal to take over an hour to format?



Sent from my iPhone using Tapatalk

 

[grip]

Hi the cccam.cfg is in usr , keys just add your line then go into softcam and change select cam 1 to cccam2.30 then do a full restart
Cobra1423

Hi Cobra, great work
I've installed cccam 2.30 added line to both usr , keys and to var,etc but still not working any ideas.

Thanks

 

[DM800HD PVR]

Hi Cobra, great work
I've installed cccam 2.30 added line to both usr , keys and to var,etc but still not working any ideas.

Thanks

Yeah I'm having the same problem, normally there is cccam.cfg file in /etc. I can't seem to find that anywhere. I have tried it in cccamd.list still no luck.

 

[cobra1423]

getting CCcam_2.3.0 cam to work

Yeah I'm having the same problem, normally there is cccam.cfg file in /etc. I can't seem to find that anywhere. I have tried it in cccamd.list still no luck.

ok this is how its done rename the cam just like this CCcam.cfg in the usr/keys folder put in your C: cccamservice.com 12000 test1 test2 and save it
next make sure your CCcam_2.3.0.emu in etc folder has this info

emuname = CCcam 2.3.0
binname = CCcam_2.3.0
startcam = /usr/bin/CCcam_2.3.0 -t -C /usr/keys/CCcam.cfg
stopcam = killall -9 CCcam_2.3.0

next stop the cam mgcamd1.35a with the red button first then select CCcam 2.3.0
and then green to restart do a full restart job done.

wee tip if you get nothing try closing the gap on your c line ie, C:cccamservice.com
and not C: cccamservice.com then full restart
hope this will help you out
cobra1423:thum:

 

[cobra1423]

Update V00.3 - error message as I remembered above - ie

leave till complete & DONE message and around another 8 minutes bbc1 loaded ok.

Switch off box and back on and image starting to load as seen on dm display - red led flashing - spidey on screen - dm display now blank - led flashing - spidey on screen - waiting...... will leave for 10 minutes to see what happens......

Update - nothing happens - back to old image me thinks..

ok lets see first use dcc FTP go into etc/init.d folder and right click on autofs then view scroll down to line 662 and see if it has this mount /dev/sdb1 /media/usb
if you don't see that right click on autofs then edit and put it in then save looks like this.
661 esac
662 mount /dev/sdb1 /media/usb
663
664 exit 0

then restart it should kick into life
cobra1423:thum:

 

[DM800HD PVR]

ok this is how its done rename the cam just like this CCcam.cfg in the usr/keys folder put in your C: cccamservice.com 12000 test1 test2 and save it
next make sure your CCcam_2.3.0.emu in etc folder has this info

emuname = CCcam 2.3.0
binname = CCcam_2.3.0
startcam = /usr/bin/CCcam_2.3.0 -t -C /usr/keys/CCcam.cfg
stopcam = killall -9 CCcam_2.3.0

next stop the cam mgcamd1.35a with the red button first then select CCcam 2.3.0
and then green to restart do a full restart job done.

wee tip if you get nothing try closing the gap on your c line ie, C:cccamservice.com
and not C: cccamservice.com then full restart
hope this will help you out
cobra1423:thum:

Hi Cobra,

This image looks great!

Sorry to bother you again. I tried fixing it myself so I thought I'll delete cccam and reinstall it. However how do I install CCCAM. Can't do it via tspanel or plugins menu.

Thanks

 

[dsbfidda]

""ok lets see first use dcc FTP go into etc/init.d folder and right click on autofs then view scroll down to line 662 and see if it has this mount /dev/sdb1 /media/usb
if you don't see that right click on autofs then edit and put it in then save looks like this.
661 esac
662 mount /dev/sdb1 /media/usb
663
664 exit 0""

Hi again cobra... line 662 was blank - put in as above and now showing bbc1 - now going to shutdown and restart ....... image now starting to load ... unfortunately same result ... LED display bar gets to about 25% then stops and after couple minutes led flashes and thats it.. trying again .. same result..

If I have time in next couple days will try another dm800hd just to see what happens (PS i have also tried different usb sticks with same result)

Thanks for your help - hopefully we can get it up and running later.. :thum::thum:

 

[cobra1423]

""ok lets see first use dcc FTP go into etc/init.d folder and right click on autofs then view scroll down to line 662 and see if it has this mount /dev/sdb1 /media/usb
if you don't see that right click on autofs then edit and put it in then save looks like this.
661 esac
662 mount /dev/sdb1 /media/usb
663
664 exit 0""

Hi again cobra... line 662 was blank - put in as above and now showing bbc1 - now going to shutdown and restart ....... image now starting to load ... unfortunately same result ... LED display bar gets to about 25% then stops and after couple minutes led flashes and thats it.. trying again .. same result..

If I have time in next couple days will try another dm800hd just to see what happens (PS i have also tried different usb sticks with same result)

Thanks for your help - hopefully we can get it up and running later.. :thum::thum:

do you have a internal hard drive also can you go into dcc telnet type in df then hit enter and copy and paste the info here.:thum:

 

[cobra1423]

cccam2..3.0 ipk file

Hi Cobra,

This image looks great!

Sorry to bother you again. I tried fixing it myself so I thought I'll delete cccam and reinstall it. However how do I install CCCAM. Can't do it via tspanel or plugins menu.

Thanks

hi I have made you a cccam2..3.0 ipk file just install it throw dcc that will be you back on track the cccam2.3.0 ipk file is in my download area.:thum:
cobra1423

DOWNLOAD HERE---------> http://sdrv.ms/1aUQvcU
ps. you don't have to rename the CCcam.cfg in the usr/keys folder I have done it all for you just add you c-line in CCcam.cfg in the usr/keys folder and do the full restart easy as 1 2 3:thum:

 

[frank087234]

cobra, do you have in normal nfi form???
what bootloader version??

 

[cobra1423]

cobra, do you have in normal nfi form???
what bootloader version??

hi not yet mite put one together at the weekend the bootloader version is ssl84D.
cobra1423.:thum:

 

[NO10RANGER]

Hi Cobra

Having problem if you could assist i have followed you guide step by step i am using a usb with no HDD on my first attempt i got a green crash screen saying box had to reboot so tried again and still haven't had tv as box is trying to boot and on getting to about 25%

any ideas

Cheers No10 Ranger

P.s how could i attach picture is needed

 

[NO10RANGER]

when i go to the ect and init.d and view autofs line 662 is as per 661 esac
662 mount /dev/sdb1 /media/usb
663
664 exit 0

Cheers No10ranger

 

[skydive80]

Still keeps giving red light bud


Sent from my iPhone using Tapatalk

 

[cobra1423]

when i go to the ect and init.d and view autofs line 662 is as per 661 esac
662 mount /dev/sdb1 /media/usb
663
664 exit 0

Cheers No10ranger

ok try this edit autofs line 662 mount /dev/sdb1 /media/usb
to this 662 mount /dev/sda1 /media/usb
and save then pull power inn and out to restart
let me know if this works also do a df command in telnet and let me know what it says.
cobra1423:thum:

 

[grip]

Cobra1423

Got it working thanks for help. Really impressed.
Quick Question trying Kiddie timer but its looking for pin number. Tried 0000 no joy. Have you set pin number. Thanks

 

[NO10RANGER]

ok try this edit autofs line 662 mount /dev/sdb1 /media/usb
to this 662 mount /dev/sda1 /media/usb
and save then pull power inn and out to restart
let me know if this works also do a df command in telnet and let me know what it says.
cobra1423:thum:

Hi Cobra thanks that seems to have solved the problem only thing i have notice now is when you go into the bouquets the + and - bouquet buttons are scrolling up and down instead of flicking through the bouquet folder i.e movies , sports , ect

Cheers
No10Ranger

 

[cobra1423]

Hi Cobra thanks that seems to have solved the problem only thing i have notice now is when you go into the bouquets the + and - bouquet buttons are scrolling up and down instead of flicking through the bouquet folder i.e movies , sports , ect

Cheers
No10Ranger

good stuff you can change that setup in MultiQuickButton
cobra1423:thum:

 

[bsmv247]

does the new image contain oscam or can it be added through tspanel or addons?