Method of Opening PowerVu Channels in Enigma2 Using Oscam

H

humaxboy2

Registered
Messages
43
miziolnb said:
Is there someone who has vu+solo se decoder working powervu channels?
Can you give me ( also via pm) your configs file, oscam emu number type and mounted imagine version on decoder?
I want to understand if my vu+solo se does work with powervu channels or not, otherwise i will sell it:mad:
Click to expand...

I have Vu Solo2. PowerVu is only working on OpenATV 5.0 - 100%, tested by me. I am trying to find to work on OpenATV 5.1 or VTI - but no success until now.

Humaxboy
 
M

miziolnb

Senior Member
Messages
182
humaxboy2 said:
I have Vu Solo2. PowerVu is only working on OpenATV 5.0 - 100%, tested by me. I am trying to find to work on OpenATV 5.1 or VTI - but no success until now.

Humaxboy
Click to expand...


I have OpenATV 5.0,too.

What kind of oscam emu is working on your vu+Solo2?
 
V

vhfuhf

Senior Member
Messages
118
But we have the vu solo se V2 not the solo2....

I managed to get biss ... but powervu is a no go here ... I am errors when I try to tune the ipstream...
 
V

vhfuhf

Senior Member
Messages
118
For those of us using vu+ the only way to make it work is using stream relay.

I have been trying but no success... if someone could help would be great... here are my steps:

1.I scanned the powervu channel and downloaded the stream using webif interface from the vu receiver.

2.I then opened the streamfile .m3u in notepad and changed the address from
http://192.168.11.97:8001/1:0:1:4:1:1:BE48F20:0:0:0:
to
http://127.0.0.1:17999/1:0:1:4:1:1:BE48F20:0:0:0:

3. I went to dreambox editor for the vu+ edition and added the iptv under services.

4. I pasted the modified url and set the Service Type to 1, Service ID: 4 which is the same as the original channel service ID, Transponder ID: 11, Net ID: 22, Namespace:33

5. I saved the new channel and uploaded to vu+.

6. I then went to the softcam.key file and modified the line for the powervu key to this:

P 121B0040 00 XXXXXXXXXXXXXX ;Where x are the keys
P 121B0040 01 XXXXXXXXXXXXXX ;

I know the key is correct becuase i have it playing on dvbdream.

7.[streamrelay]
stream_ecm_delay = 100
stream_relay_enabled = 1

8. Checked the box Include ECM in http streams in webif setting.

But when I try to view the channel I get this message:

Service Unavailable check tuner configuration ... Has anyone see this?

I even tried with free channels and I get the same error ... this must be some configuration on my side ... i just don't know where is the mistake...
 
Last edited:
C

ca1ne

Member
Messages
66
verify that the emu running properly, when problems with the stream relay. changing the port and removing any path and name space in url worked here on vu+ uno (relay)
 
P

PowerVu +

Registered
Messages
3
vhfuhf said:
For those of us using vu+ the only way to make it work is using stream relay.

I have been trying but no success... if someone could help would be great... here are my steps:

1.I scanned the powervu channel and downloaded the stream using webif interface from the vu receiver.

2.I then opened the streamfile .m3u in notepad and changed the address from
http://192.168.11.97:8001/1:0:1:4:1:1:BE48F20:0:0:0:
to
http://127.0.0.1:17999/1:0:1:4:1:1:BE48F20:0:0:0:

3. I went to dreambox editor for the vu+ edition and added the iptv under services.

4. I pasted the modified url and set the Service Type to 1, Service ID: 4 which is the same as the original channel service ID, Transponder ID: 11, Net ID: 22, Namespace:33

5. I saved the new channel and uploaded to vu+.

6. I then went to the softcam.key file and modified the line for the powervu key to this:

P 121B0040 00 XXXXXXXXXXXXXX ;Where x are the keys
P 121B0040 01 XXXXXXXXXXXXXX ;

I know the key is correct becuase i have it playing on dvbdream.

7.[streamrelay]
stream_ecm_delay = 100
stream_relay_enabled = 1

8. Checked the box Include ECM in http streams in webif setting.

But when I try to view the channel I get this message:

Service Unavailable check tuner configuration ... Has anyone see this?

I even tried with free channels and I get the same error ... this must be some configuration on my side ... i just don't know where is the mistake...
Click to expand...


Thank you very much for your interest, but I've already done all the settings I add the current key opens the TV card but does not open with vu+ duo

I wonder Am I doing something wrong somewhere
meanwhile system Linux e2 Is not nothing to do with the system
 
P

PowerVu +

Registered
Messages
3
ca1ne said:
verify that the emu running properly, when problems with the stream relay. changing the port and removing any path and name space in url worked here on vu+ uno (relay)
Click to expand...

I think a problem with this stream relay
or we could not load properly
Starting again from scratch
Following reinstallation respectively steps do we do now

Many thanks for your interest in friends @vhfuhf and @ca1ne
 
C

ca1ne

Member
Messages
66
the fastest way to make this is to make a script.
using kingofsat.net, script have to serch for powervu as encryption, grab any sid, convert it to hex and store it to a key file. grouping I don't know if by frequency or by satellits. and to add dummy keys for both key 00 and 01 for each group. so you may use replace function when new key comes, as AU does'nt seem to work with the new key format

edit:

for the grouping it have to be the channels using same OP keys.
and unique dummy key for the group and for the 00 n 01.

hope some one can make it, coz manually this is alot of work..

example:
P 0001001 00 000000000000
P 00010001 01 111111111111
P 00010002 00 000000000000
P 00010002 01 111111111111
P 00020003 00 555555555555
P 00020003 01 777777777777
P 00020004 00 555555555555
 
Last edited:
V

vhfuhf

Senior Member
Messages
118
I am sure my emulation is working because I have biss working reading the same softcam.key file ... it is just a matter to make sure my settings are correct for this stream relay ...

This is certainly a very hard task ... maybe I really have to change receivers ... I am not a big fan of stream relay

edit:

but even running a script ... we still need to make sure that the stream relay configuration is correct...

Even when I try to stream a free channel the streamrelay doesn't work ... if someone could share their settings would be great...
 
Last edited:
C

ca1ne

Member
Messages
66
biss does not use the new format, only powervu.
some emu need only sid added, but the latest from suteam need both group and correct sid for every channel in key file. using live log to verify the emu are strongly recommended
 
V

vhfuhf

Senior Member
Messages
118
I don't think the problem is in the emulator ... but in the settings of this IPTC stream relay ...

if I setup stream relay on a free channel ... i should be able to watch without the emulation .... this is not the case here...

If I try any FTA channels for streamrelay .... the channel does not work ... so I don't really know what I am doing wrong and I am following line by line....
 
C

ca1ne

Member
Messages
66
vhfuhf said:
I don't think the problem is in the emulator ... but in the settings of this IPTC stream relay ...

if I setup stream relay on a free channel ... i should be able to watch without the emulation .... this is not the case here...

If I try any FTA channels for streamrelay .... the channel does not work ... so I don't really know what I am doing wrong and I am following line by line....
Click to expand...

not sure if FTA will pass the relay, I'll test
pasting the FTA link to vlc with no editing, work? (no relay)

edit:
erm, snow on my dish, will have to wait.
 
V

vhfuhf

Senior Member
Messages
118
ca1ne said:
I'm in luck, 4.8 are strong.
stream relay work on FTA too
Click to expand...

so this proves to me that I have something not setup properly on stream relay ... if anyone seen this error before please let me know ...

I am getting Service unavailable check tuner configuration
 
You must log in or register to reply here.
Top