how to get updates sky uk card

[satpink]

in my config i have:
[reader]
label = skyuk
protocol = internal
device = /dev/sci0
caid = 0963
boxid = XXXXXXXX
detect = cd
mhz = 500
cardmhz = 357
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmwhitelist = 0963@000000:3E,4E,7D,7E,45,47,62,68,69,6A,6B,6F,72 ,79, 42
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1

 

[satpink]

i have edited my conf, server & user, do i need to change anything in cccam cfg?

i have left my mhz settings for my card at the ones i have posted, don't want to burn my card, its been fine at those settings

 

[guli]

Oscam.server

[reader]
label = skyuk
protocol = internal
enable = 1
device = /dev/sci0
detect = cd
boxid = xxxxxxxx #( not needed as oscam can read sky uk boxid )
mhz = 600
cardmhz = 600
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmwhitelist = 0963@000000:3E,4E,7D,7E,45,47,62,68,69,6A,6B,6F,72 ,79, 42
blockemm-g = 1
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
lb_weight = 101


with this config you will get better ecm reading as the default cardmhz is 5mhz .

what i have highlighted in red is needed to get the card update .

it is upto you what cardmhz you want to use really .

but the settings in red are needed .

 

[satpink]

i have added those lines & also some others that were missing from my set up, would it be helpful to others if i posted my original server & user files?

 

[satpink]

also in my conf i have:

blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1

should -s be changed to 0?

 

[guli]

i have edited my conf, server & user, do i need to change anything in cccam cfg?

put the N line in your CCcam.cfg .

put the F line in CCcam.cfg as explained earlier .

give your openbox a C line as explained earlier .

now reboot your vu+duo & show log .

 

[guli]

i have added those lines & also some others that were missing from my set up, would it be helpful to others if i posted my original server & user files?

yes it would help others but once you have set it up correctly .

 

[satpink]

i've done as advised but getting nothing on either stb ?

how do i get into the oscam web interface?

 

[satpink]

its ok i remembered

 

[guli]

how were you connecting to your openbox before , do as you did except put yes at the end of the C line .

in the F line put like this :

F: user pass 0 0 1 { 0:0:1 }

type in webrowser your server ip + http port .

once in your webif show the status log .

remember to start oscam first then CCcam , that way oscam gets to read the card before CCcam.

 

[satpink]

i changed my conf, server & user for the ones that you supplied & in the webif i'm getting in the 4 horizontal boxes at the top Status Ok, Ok, Off & Ok i assume that my card reader is offline

 

[satpink]

2011/09/02 19:05:08 2AAC6860 s creating thread for device /dev/sci0
2011/09/02 19:05:08 2AAC6860 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/02 19:05:08 2AAC6860 s waiting for local card init
2011/09/02 19:05:08 2B8F14B0 h HTTP Server listening on port 15000
2011/09/02 19:05:08 2BCF14B0 r reader thread started (thread=2BCF14B0, label=skyuk, device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2011/09/02 19:05:09 2AAC6860 s init for all local cards done
2011/09/02 19:05:09 2AAC6860 s anti cascading disabled
2011/09/02 19:05:30 2C5014B0 c client connected to 15500 port
2011/09/02 19:05:30 2C5014B0 c encrypted newcamd:15500-client 127.0.0.1 granted (user, au=on (1 reader))
2011/09/02 19:05:30 2C5014B0 c user user authenticated successfully (CCcam)
2011/09/02 19:05:30 2C5014B0 c AU disabled for user user
2011/09/02 19:05:33 2C5014B0 c user (0963&000000/0EDA/6A:071A): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:05:39 2C5014B0 c user (0963&000000/0EDA/6A:0666): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:05:44 2C5014B0 c user (0963&000000/0EDA/6A:710A): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:05:52 2C5014B0 c user (0963&000000/0EDA/6A:ABFB): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:06:00 2C5014B0 c user (0963&000000/0EDA/6A:4AFC): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:06:09 2C5014B0 c user (0963&000000/0EDA/6A:A27B): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:06:17 2C5014B0 c user (0963&000000/0EDA/6A:1179): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:06:24 2C5014B0 c user (0963&000000/0EDA/6A853): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:06:33 2C5014B0 c user (0963&000000/0EDA/6A:EB3E): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:06:40 2C5014B0 c user (0963&000000/0EDA/6A:904C): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:06:48 2C5014B0 c user (0963&000000/0EDA/6A:43D7): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:06:56 2C5014B0 c user (0963&000000/0EDA/6A:5BB4): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:07:01 2C5014B0 c user (0963&000000/0F29/6A:F28B): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:07:07 2C5014B0 c user (0963&000000/0F29/6A:AA27): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:07:14 2C5014B0 c user (0963&000000/0F29/6AB43): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:07:22 2C5014B0 c user (0963&000000/0F29/6A:48EF): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:07:30 2C5014B0 c user (0963&000000/0F29/6A:0E99): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:07:38 2C5014B0 c user (0963&000000/0F29/6A:55DB): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:07:46 2C5014B0 c user (0963&000000/0F29/6A:2D2E): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:07:54 2C5014B0 c user (0963&000000/0F29/6A:4D50): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:08:03 2C5014B0 c user (0963&000000/0F29/6A:3DA6): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:08:10 2C5014B0 c user (0963&000000/0F29/6A:1BBB): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:08:18 2C5014B0 c user (0963&000000/0F29/6A:2F3D): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/02 19:08:26 2C5014B0 c user (0963&000000/0F29/6A:CBF7): rejected group (120 ms) (of 0 avail 0) (no matching reader)

 

[guli]

show me the configs as you have them now . aswell as the N line in your cfg .

which one is showing off reader ?

 

[satpink]

Oscam.conf

[global]
logfile = /var/local/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 0
saveinithistory = 1

[newcamd]
port = 15500@0963:000000
key = 0102030405060708091011121314
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
keepalive = 1

[webif]
httpport = 15000
httpuser = user
httppwd = password
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Oscam.server

[reader]
label = skyuk
protocol = internal
enable = 1
device = /dev/sci0
detect = cd
boxid = xxxxxxxx #( not needed as oscam can read sky uk boxid )
mhz = 600
cardmhz = 600
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
lb_weight = 101

ccount]
user = user
pwd = pass
uniq = 2
monlevel = 1
caid =0963
ident = 0963:000000
group = 1
au = skyuk
blockemm-unknown = 1
blockemm-g = 1
blockemm-u = 0
blockemm-s = 0

#[account]
#user = dummyuser
#user = test1
#pwd = test2
#monlevel = 0
#uniq = 0
#group = 1,2
#au = 1
#caid = 0963
#############
oscam.user
=========
# everybody needs an entry, even yourself.


[account]
# for your own box.
user = local
description = for local mgcamd or DVBAPI
pwd = mypass
disabled = 0
group = 1
uniq = 1
au = 1
# if you want the card updated from yourself

[account]
# for friend who may be using CCcam although works
# any protocol defined in oscam.conf
user = friend1
pwd = pass1
description = for friend with CCCam
disabled = 0
group = 1
uniq = 1
sleep = 0
au = 0
cccmaxhops = 3
cccreshare = 0
keepalive = 1


[account]
# intended for a friend using mgcamd, although works
# with any protocol defined in oscam.conf
user = friend2
pwd = pass2
description = for friend with mgcamd
disabled = 0
group = 1
uniq = 1
sleep = 0
au = 0
keepalive = 1

# oscam.user end

(4) Starting Oscam
==================
If your box has a script, then use it. Otherwise, kill all other Cams, telnet
ito your box and issue the command

/var/bin/oscam -c /var/keys

This assumes the Oscam binary is in /var/bin and the config files in /var/keys.
You should gets lots of information, hopefully showing all is well.

(5) Your clients
================
Assuming the configurations quoted above.
If you're using mgcamd as your local client rather than the Oscam dvbapi, you'll
need a line in your newcamd.list

CWS = 127.0.0.1 12345 local mypass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

using information from oscam.conf and oscam.user

Your friend with CCcam needs to add to their CCcam.cfg

C: yourserver.yourip.com 12000 friend1 pass1

and your friend with mgcamd adds to their newcamd.list

CWS = yourserver.yourip.com 12345 friend2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

N: 127.0.0.1 15500 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

 

[satpink]

C: my box ip port user pass yes

F line details from cccam cfg
F: user pass 1 0 1 { 0:0:2 }

 

[satpink]

just changed card from lower slot to upper now instead of (off) i get (cardok)

 

[satpink]

2011/09/02 19:57:49 2BCF14B0 r [videoguard2-reader] type: VideoGuard BSkyB (0963)
2011/09/02 19:57:49 2BCF14B0 r [videoguard2-reader] tier: 0003, expiry date: 2011/09/13-00:00:00
2011/09/02 19:57:49 2BCF14B0 r [videoguard2-reader] tier: 000b, expiry date: 2011/09/13-00:00:00
2011/09/02 19:57:49 2BCF14B0 r [videoguard2-reader] tier: 001d, expiry date: 2011/09/13-00:00:00
2011/09/02 19:57:50 2AAC6860 s init for all local cards done
2011/09/02 19:57:50 2AAC6860 s anti cascading disabled
2011/09/02 19:58:02 2C5014B0 c client connected to 15500 port
2011/09/02 19:58:02 2C5014B0 c encrypted newcamd:15500-client 127.0.0.1 granted (user, au=on (1 reader))
2011/09/02 19:58:02 2C5014B0 c user user authenticated successfully (CCcam)
2011/09/02 19:58:02 2C5014B0 c AU enabled for user user on reader skyuk
2011/09/02 19:58:06 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:58:06 2C5014B0 c user (0963&000000/0EF8/80:52D3): not found (102 ms) by skyuk (of 1 avail 1)
2011/09/02 19:58:12 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:58:12 2C5014B0 c user (0963&000000/0EF8/80:115A): not found (93 ms) by skyuk (of 1 avail 1)
2011/09/02 19:58:17 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:58:17 2C5014B0 c user (0963&000000/0EF8/80:1899): not found (93 ms) by skyuk (of 1 avail 1)
2011/09/02 19:58:24 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:58:24 2C5014B0 c user (0963&000000/0EF8/80:BCB2): not found (93 ms) by skyuk (of 1 avail 1)
2011/09/02 19:58:32 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:58:32 2C5014B0 c user (0963&000000/0EF8/80:2188): not found (93 ms) by skyuk (of 1 avail 1)
2011/09/02 19:58:40 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:58:40 2C5014B0 c user (0963&000000/0EF8/80:9AA1): not found (93 ms) by skyuk (of 1 avail 1)
2011/09/02 19:58:48 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:58:48 2C5014B0 c user (0963&000000/0EF8/80:AADA): not found (93 ms) by skyuk (of 1 avail 1)
2011/09/02 19:58:56 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:58:56 2C5014B0 c user (0963&000000/0EF8/80:3917): not found (143 ms) by skyuk (of 1 avail 1)
2011/09/02 19:59:04 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:59:04 2C5014B0 c user (0963&000000/0EF8/80:9C0B): not found (143 ms) by skyuk (of 1 avail 1)
2011/09/02 19:59:12 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:59:12 2C5014B0 c user (0963&000000/0EF8/80F11): not found (143 ms) by skyuk (of 1 avail 1)
2011/09/02 19:59:20 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:59:20 2C5014B0 c user (0963&000000/0EF8/80:9DF4): not found (93 ms) by skyuk (of 1 avail 1)
2011/09/02 19:59:28 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:59:28 2C5014B0 c user (0963&000000/0EF8/80:700F): not found (92 ms) by skyuk (of 1 avail 1)
2011/09/02 19:59:35 2BCF14B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/02 19:59:35 2C5014B0 c user (0963&000000/0EF8/80:E686): not found (93 ms) by skyuk (of 1 avail 1)

 

[guli]

Oscam.conf

[global]
cachedelay = 120
nice = -1
maxlogsize = 0
saveinithistory = 1

[newcamd]
port = 15500@0963:000000
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = 15000
httpuser = user
httppwd = password
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Oscam.server

[reader]
label = skyuk
protocol = internal
enable = 1
device = /dev/sci0
detect = cd
mhz = 600
cardmhz = 600
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
lb_weight = 101

oscam.user

[account]
user = user
pwd = pass
uniq = 2
monlevel = 1
caid =0963
ident = 0963:000000
group = 1
au = skyuk
blockemm-unknown = 1
blockemm-g = 1
blockemm-u = 0
blockemm-s = 0

in CCcam.cfg

N: 127.0.0.1 15500 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

now stop CCcam stop oscam

restart oscam restart CCcam

check in CCcaminfo if the N line has connected .

show your log

you can try your extra settings afterwards .

 

[guli]

just changed card from lower slot to upper now instead of (off) i get (cardok)

device = /dev/sci0

is for upper slot . so it's working then good luck .

 

[satpink]

ok i can see the n line/server in cccam info it says its connected, managed to connect my openbox with vu + duo, no picture on any of stb's except for freeview channels, do i just have to wait?