Greek language in AAF Multimedia V2 for Ipbox 9000

[trafficman]

I tried AAF Multimedia V2 for ipbox 9000 but it does't support greek language in menu or in epg for greek nova channels. Can someone help me because I like this image a lot. How at least have the epg in Greek.
Thanks

 

[manosm]

it's font problem
what skin do you use ?

 

[trafficman]

I use the default skin with picon support. Which skin do you suggest to use ??

 

[manosm]

i use these fonts
download extract the fonts & put them in directory

/var/usr/share/fonts/

overwrite the old files

/rapidshare.com/files/455099167/fonts.zip

 

[trafficman]

Thank you for your response I will try tonight when I will get at home. Another problem that I have is with the hard disk. I was using a dgs image with a 320GB disk with 2 partitions, one was 1GB linux and the other was ext2 and timeshift was working fine. This image can see the hard disk but it cannot initialize it or use it in any way. When I try to check the filesystem it tries to check for ext3 it fails and reboots.How can I initialize the hard disk and use it for timeshift ?

 

[manosm]

you might need to add something in fstab
to mount the disk auto after reboot
or format again

read this thread

http://www.sat-universe.com/showthread.php?t=132789

 

[trafficman]

I replaced the fonts but still the EPG is in English. I have chose greek language in setup but the menus and the epg are in English. I don't care about the menus just to fix the EPG.
I managed to mount and use the hdd for timeshift and record thanks for your help. Do you know how can I use the hdd to store picons or plugins. I use the flash version and the memory is not enough. I checked plugins but most of them require usb-stick.

 

[manosm]

if the menu is english you won't see greek epg
here is the greek translation

www.multiupload.com/4L9J4I7NQ0

you can use symlink for picons
make a folder picon in hdd & put all picons inside

then telnet & run this

ln -s /hdd/picon /usr/share/enigma2

 

[trafficman]

Thank you very much for your files. It works perfectly now. Just a final question which version of oscam do you use because I installed the 4366 but it cannot clear the nova HD channels which was working with previous image.

 

[manosm]

after the last card updates most of cards with hd channels are not working any more

i compile oscam on my own when i see important code changes
i use version 4867
webif ,cccam & newcamd client only

Version: 1.00-unstable_svn Rev. 4867
Maxpid: UNLIMITED


Active modules:
Webif support: yes
OpenSSL support: no
Dvbapi support: yes
Dvbapi with stapi support: no
Anticasc support: no
ECM doublecheck: no
Irdeto guessing: yes
Debug: yes
LED support: no
Qboxhd-LED support: no
Log history: yes
Monitor: no
Camd33: no
Camd35 UDP: no
Camd35 TCP: no
Newcamd: yes
Cccam: yes
Gbox: no
Radegast: no
Serial: no
ConstCW: no
Cardreader: no

here it is if you want to try it

rapidshare.com/files/455254944/oscam.zip

 

[trafficman]

Thank you I will try it tonight

 

[trafficman]

I replaced my file "oscam_4376" in /var/bin with the file you gave me but it cannot be loaded. It tries to start and after 3 sec says no cam. When I put the old file back the same thing. I had to reinstall oscam_4376 from plugin menu. What am I doing wrong ??

 

[manosm]

first of all check permissions (chmod 755)

then start oscam from telnet to see what's wrong
4376 is quite old version & many things are changed in config files
something might be wrong there & oscam stops

 

[trafficman]

Thank you I will check it when I will go home.Can you please send me the default config files for 4867 in order to replace config files too.

 

[manosm]

gia dokimase

oscam.conf

[global]
logfile = 1
disablelog = 1
disableuserfile = 1
nice = -10
maxlogsize = 32
waitforcards = 0

[cccam]
port = 11000
reshare = 3
version = 2.1.4


[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = local
pmt_mode = 0
request_mode = 0

[webif]
httpport = 8888
httprefresh = 0
httpallowed = 192.168.1.1-192.168.1.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam.reader

[reader]
label = cccam
enable = 1
protocol = cccam
device = xxxxxx.dyndns.org,12000
user = user
password = pass
inactivitytimeout = 1
reconnecttimeout = 30
group = 1
lb_weight = 100
cccversion = 2.2.1
cccmaxhops = 10
ccckeepalive = 1

 

[trafficman]

I tried oscam and your setting in the weekend. Excellent it works now!!! Thank you very much for your help.

 

[manosm]

i'm happy that you made it

 

[trafficman]

Hi I want to install the AAF Multimedia V2 in the hard disk. I have it in flash but it have memory problems and needs restart twice a day. I have an external hard disk 320GB connected to my ipbox 9000 with two ext2 partitions sda1 1GB and sda2 for timeshift and records. I downloaded AAF usb images I connected with telnet to sda1 and unzipped the image tar file and everything was ok. I can see all the files and folders like the image I have in the flash memory.
When I umount the sda1 and restart the ipbox I press 2 to start from usb/sda1 it says on vdf usb-update but nothing happens for about an hour.I am using the MULTIBOOT for IPbox 9000 - BOOT 0.5.5 MULTIBOOT file which I found here:
http://www.sat-universe.com/showthread.php?p=526884. What I am doing wrong. Can you please help me.

 

[manosm]

if you see usb-update one screen means that your trying
to update the flash .
this only appears when you press the menu button on the box,
very strange ...

if you use BOOT 0.5.5 MULTIBOOT
button 2 boots usb sda1 without hdd
that's why it's not booting correctly

if your image is installed on hdd
the right partition might be sdb1 or sdb2 & not sda

try to install on flash the latest sifteam image
it has bootplus bootmanager plugin inside
you can assign the multiboot buttons & partitions
play with it try this setup & you will find out
which one is correct

2 sda1 enigma2
3 sda2 enigma2
4 sdb1 enigma2
5 sdb2 enigma2

 

[trafficman]

Thanks for your reply. The problem is that my HDD is connected to the box through usb. That's why the partitions are sda1 - sda2..... I found a enigma 2 plugin for multiboot Bootplus 2.3 plugin but no luck. How can I make the ipbox 9000 to use the usb-hdd like an internal hdd ??