marki said:....Does the fact that it's an HD receiver mean that it could handle DVB-S2...
Comag can handle DVB-S2 signal but symbol rate only at 1-35 Mb / s.So your receiver can not read the signal with SR 44100 how has this transponder.
marki said:....Does the fact that it's an HD receiver mean that it could handle DVB-S2...
Can anyone let me know how to run BISS keys on dreambox DM800SE
I already using a cccam for 28.2e with a 2.2.1 cam and wanted to also add the biss keys for 27.5w
I have both satellites working and have a lock on 27.5W with a good 70%+ SNR using DiSEqC in simple mode. I have been able to scan and install the channels but now need to install the keys etc
Any help with the installation would be very much appreciated.
Do I need to do anything apart from install the keys?
http://openpli.org/forums/topic/26684-enigma2-and-bbcitv-at-275w-intelsat-a-big-challenge/
You need Just a different box ,lol's !!
Dreambox dont recognise the PMT Pids [ N/A ]
therefor you wont be opening channels on 27.5w
but other biss channels will be ok Just d/load a constant.cw key file and put constant.cw file in var/keys with DCC
nope sorry m8 but no soloution its just the simple fact that PMT PID's is not shown or even recognised [ N/A ] error and "Timeout reading PMT" error msg is displayed on every channel
if its just a box to view channels then Technomate 5402 HD will allow you to view with CCcam and will clear BBC Channels on 27.5w via biss keys very easily .
New key
CW: XX XX XX 34 XX XX XX 8E