Ferguson HD [Main Chat]

I

Iba

Registered
Messages
14
MICKAH said:
guys with the new release of the firmware for both Ariva 150 and 250, is there a chance CCAM could be looked at as it glitchs badly on these boxs and update NEWCAMD to a newer version?

thanks
Click to expand...

I second Mickah comments :)
 
K

kanetaker2010

Registered
Messages
37
mgcamd client works fine on a150 if you have activated on oscam server mgclient, newcamd client works fine on a150 if you have desactivated mgclient on oscam server.
 
Last edited:
T

thisnthat

Registered
Messages
4
A250Combo_1.20B6 patch

Hi JAKITAKI,

Can you post the new A250Combo_1.20B6 patch which was released by Ferguson on 5th November 2012,
Thank man,
Appreciated :)
 
B

bardaxx

Registered
Messages
7
hi i have bought a ferguson a150 with wifi key, the signal in hd work only in YUV mode, but if the signal is in HD the wifi key dont view the network!
i have the last original firmware, anyone can help me?
i need to flash for cc*cam client but its possibile to return to original firmware for warrenty? anyone can post the original firmware for flash? thx!
 
B

bardaxx

Registered
Messages
7
hi i have bought a ferguson a150 with wifi key, the signal in hd work only in YUV mode, but if the signal is in HD the wifi key dont view the network!
i have the last original firmware, anyone can help me?
i need to flash for cc*cam client but its possibile to return to original firmware for warrenty? anyone can post the original firmware for flash? thx!
 
M

MICKAH

Registered
Messages
47
wifi on these boxs are useless, the dongle needs to be RALINK 5370 type, the firmware is in the Ariva 250/150 firmware thread, first page, flash the box with that if you need to return it.
 
F

fRUTTiFrESH

Registered
Messages
68
@bardax

Original Firmware can be found on the Ferguson website - there´s no problem switching between them.

Saludos
 
W

williams2020

Registered
Messages
64
how do i load ccwkeys into 250combo,i download into usb to transer it, but the stb is rejecting the file ccwke, eny help please.tanx
 
V

visiondvd

Registered
Messages
3
Dunno if this means anything or not

MICKAH said:
guys with the new release of the firmware for both Ariva 150 and 250, is there a chance CCAM could be looked at as it glitchs badly on these boxs and update NEWCAMD to a newer version?

thanks
Click to expand...
I have the 202e and have been using newcamd and ccam both witout any glitch at all.
Is it possible the glitch is for other reasons rather than firmware?
 
I

Iba

Registered
Messages
14
enrydgl said:
Hi, to update the software
I must delete something or I can replace mi all+bootloader?

Bye
Click to expand...

As far as I know you dont have to delete anything, just update via USB.

However, thats what I have done and now the scrambled stations are not coming through - dont know what Ive done wrong :(
 
JAKITAKI

JAKITAKI

Super VIP
Messages
9,214
enrydgl said:
Hi, to update the software
I must delete something or I can replace mi all+bootloader?

Bye
Click to expand...

- Rip, dump the channel list- Reset, the factory settings
- Upload the new software, as allcode + bootloader
- Upload the channel list from the dump, as userdb
- Make the network settings and sharing
 
I

Iba

Registered
Messages
14
JAKITAKI said:
- Rip, dump the channel list- Reset, the factory settings
- Upload the new software, as allcode + bootloader
- Upload the channel list from the dump, as userdb
- Make the network settings and sharing
Click to expand...

Thanks for that, but Im a little unsure, is this right:

1 - Upload new patch
2 - Do factory reset
3 - input my password and URL details
4 - scan in my satelites

Also before I was using Port 10000 - in your attachments it says use Port 8000, is this right?

Thank you
 
M

MICKAH

Registered
Messages
47
Newcamd is not to bad, but CCAM is glitchy, anyone that I have seen using it, has the same issue, the CCAM version is old in the firmware,
 
You must log in or register to reply here.
Top