Enigma2 SifTeam 0.2.0 [9000HD]

[arashkhaan]

OK I'm using nlb8873 now is it possible to get back to nlb image after this (enigma2)?

 

[acer2]

Araskhan, I will recomend to use USB stick. You can have in flash NLB or SiF 8873, and also enigma with stick. No problem change images. Only if you boot NLB or SiF , USB stick have to go out.

regards
acer2

 

[MAKBAR]

e2 on 9000

hi all

i have just flashed my unit for third times and getting stuck on BOOTING.

1. I flashed with usb lead and flash tool
2. i used usb_all_noboot.img
3. unit flashed ok.
4. switch box off
5. open putty
6. select serial com1, 115200
7. connect serial cable
8. switch box holding ctrl+z
9. cubrevo promt.

10 type in

setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 mem=128m ip=192.168.1.150:192.168.1.111:192.168.1.1:255.255 .255.0 coprocessor_mem=4m@0x10000000,4m@0x10400000

then type in

saveenv

the box did its business.
switch of and connect to tv.
switch on and stuck on BOOTING

 

[MAKBAR]

E2 9000hd

Hi Most Importent

Forgot To Say

Please Help

Thank U In Advance

 

[easypr]

setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 mem=128m ip=192.168.1.150:192.168.1.111:192.168.1.1:255.255 .255.0 coprocessor_mem=4m@0x10000000,4m@0x10400000

Man what ever you did dont know did you notice that you have one empty space on subnet mask which means that your ip will not work, try one more time the putty thing and re flash it,

Cheers

 

[xxxAxxx]

yes true there's a space but that only for network setup change....if he stuck on booting no space left on device this why.....

 

[arashkhaan]

I downloaded the Flash.tar file , az far az I know it should be flashed with flash tools !! if I use usb stick so I should download the other file is it correct ?
But if I use Flash.tar file is possible to flash egain and go back to nlb ?

 

[dorosk]

Yes you can go back to NLB. You may have to flash first a 32Mb version and then the latest NLB.

 

[arashkhaan]

Yes you can go back to NLB. You may have to flash first a 32Mb version and then the latest NLB.

Sorry I'm new would you explain which one is 32Mb version ? thanks
and also how can I get "putty" which program is this ?

 

[dorosk]

A 32MB is full image. You can use one of the below, they are available in the forum.
cuberevo_r7043_usb_all_noboot.rar OR Cuberevo_r7473 official.rar

Get putty from here: http://www.chiark.greenend.org.uk/~sgtatham/putty/

 

[MAKBAR]

hi all

continue from last night.

reloaded the image.

the unit go pass the booting but blank screen.
i can move the chan up/down and see the name on display of the box. i can not see any thing on tv.

at this stage i am not concerned about network.

at moment i am putting cubrevo 7043 on as suggested.

thank u for ur help

hopefully will get their,

ps can any 1 up load a working image that can be used to get a picture, and then be modified to individual needs ??????

thank u

 

[dorosk]

the unit go pass the booting but blank screen.
i can move the chan up/down and see the name on display of the box. i can not see any thing on tv.

Did you set up your satellites correct?

 

[MAKBAR]

hi dorosk

i can not get to that stage.

i c nothing on screen.(tv)

 

[catseye]

Hows your box connected to tv -scart ot hdmi & do you have HDD installed?

Im sure ive read that scart doesnt work yet

I couldnt get enigma 2 to load before, now ive got HDD its loaded into flash ok

Cant get the stick version to work yet though

 

[MAKBAR]

hi catseye

thank u for reply

i have tv connected by hdmi lead
have 1TB hdd

 

[VolvoV70T5]

Hi,

I tested the new Enigma 2 by loading it into the flash (could not get it to go past the booting screen when running off the stick or hard drive)
Once I had finished playing with it I just loaded the latest NLB8873 image straight back into flash and it works perfectly, so no need to mess around with full images, just drop the NLB image back on as you usually would.

Hope this helps,
Paul.
By the way I do really like the new Enigma2, very nice software just no use to me until the cable side is better supported.

 

[arashkhaan]

By the way what this engima2 does ?

 

[catseye]

Hi,

I tested the new Enigma 2 by loading it into the flash (could not get it to go past the booting screen when running off the stick or hard drive)
Once I had finished playing with it I just loaded the latest NLB8873 image straight back into flash and it works perfectly, so no need to mess around with full images, just drop the NLB image back on as you usually would.

Hope this helps,
Paul.
By the way I do really like the new Enigma2, very nice software just no use to me until the cable side is better supported.

Ive loaded it onto flash -its a piece of cake but cant get past 'booting ' message' on front display when trying to use usb stick etc

 

[animal666]

I cant seem to load this image on,
Im flashing the flash version using Flashtools v1.0.2 but after downloading the box says "ER 2".
Flashtool says " DATA CRC is not correct. check file"

Has anyone had this problem?

Thanks in advance all.

 

[arashkhaan]

I downloaded the file for usb stick (tar.) but when I extact the zip file I get error !!! what is wrong !