Enigma2 SifTeam 0.2.0 [9000HD]

A

acer2

Registered
Messages
199
New version of Enigma of Tideglo and Sif Team is out:

release 0.2.0:
*********************
Bootargs are changed a little bit (simply removed the bygphysarea param), you can use the old one, or update them (doesn't matter if you update 'em or not)

What's new:
- support for:
- cuberevo-mini2 (cuberevo-3000HD/ipbox 910HD)
- cuberevo-mini (ipbox 900HD)
- cuberevo (ipbox 9000HD rel1 and rel2)
cuberevo-250hd (ipbox 91hd) and 200hd are not yet ready, i need more time, sorry
- support for multple tuners:
- dvb-s2 (samsung and new sharp tuners)
- dvb-s
- dvb-t
- dvb-c
- fix in epgcache to solve greenscreen in EPG->Similar Events
- improved resynchronization after fast forward
- added audio track selection for m2ts/trp/vob, after changing the audio track it might take 2-3 seconds for the sound to continue
- tuxtxt dont crash if no swap is used
- pictureplayer in fullscreen
- networktest working (not yet enabled the possibility to change by menu ipaddresses)
- added power-off function (to be tested better)
- busybox +ip addr +nslookup
- more exact seeking for m2ts/trp/vob on keys 1/3 4/6 7/9
- added mkv support
- volume up/down fix
- added dts playback
- support for twin tuners (to be tested better, working only live channels)
- added seeking with 1/3 4/6 7/9 keys for some avi files
- many HDMI related fixes
- added m2ts and trp file extensions support in mediaplayer
- Fixed CVBS, RGB, S-Video switching SCART mode
- Enable choose ColorFormat for HDMI, set Component to ColorFormat YUV as default
- added HDMI-PC custom resolutions
- fix the pictureviewer
- fix placing video picture on screen for Pig render. Skins with small video window now works.
- scart set widescreen flag if wanted
- fixed timer-bug
- mpeg-1, mp2, 23.976 fps work
- fixed the problem with low-bitrate streams
- aspect fix for channels like BBC HD with resolution 1440x1080
- mute should now work
- added streamproxy for streaming channels via lan
- changed webif to port 80
- fixed webif in many parts
- support for HD-Skins
- support for HD-Picons
- pyopenssl added
- fix dvd-player
- fixed HMDI, Scart detection
- firstboot will be done by Wizard
- fixed audio dropouts and video artefatcs
- fixed many remote controller handling (all buttons should now works)
- fixed possibility to change audio on channels by remote controller
- SPDIF out should be fixed
- added python bin
- fixed hdd format
- fixed hdparm (for hdd standby)
- default language is fixed to English
- added pl2303 driver (for external smart card reader)
- updated polish language (thank's to zbigzbig and crashs)

Consider also that any kind of mods are enabled, so everybody can do their own image, but please do not delete thanks and readme file.
All people collaborating had worked hard, so please let's have a little respect.

release 0.1.0(beta):
*********************
This is the first public release, it's released as a beta version, probably it has many and many bugs, but to fix and to discover them I need all your help, so I decided to make it public
This version does not support:
- card reader
- DVB-T, DVB-C, DVB-S tuners
- twin tuner

Enjoy it! Tideglo

Thanks Tideglo. I am in a hurry to check it. Sorry I have no right to post here.
Cheers
acer2
 
F

freaky12

Registered
Messages
22
Can this be flashed on top of the NLB image guys or do i need to revert the box back to the original dgs image and then flash with enigma?
 
D

dorosk

Registered
Messages
100
Another Question
I'm using also the latest NLB image.
Can I use the Flash version and install it as second image through the NLB web-if?
 
B

Bro1

Registered
Messages
278
To test this enigma2 image you need a running nfs server and a serial & network
connection to the receiver.

You need uboot 1.3.1 or higher to run e2 (never tested with lower versions)

Do this only if you want to use nfs-server otherwise go to point 3:
1. extract the tgz file on the server and set the directory in /etc/exports
for example:
/root/Desktop/root 192.168.1.0/255.255.255.0(rw,no_root_squash,sync,no_subtree_check)

where 192.168.1.0 is your net base-address and 255.255.255.0 is your netmask

2. restart nfs server

3. connect via serial console with an hyperterminal connection to the receiver (I suggest you to use putty, it's freeware, and configure it to use a 115200 serial connection)

4. turn on the receiver and hit ctr+z in serial console
you should see the following prompt:

cuberevo>

5. customize the following settings to your network environment and type them into the
serial console:

setenv menu_1 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/nfs nfsroot=/root/Desktop/root rw rootpath=/root/Desktop/root ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit";setenv bootcmd "nfs a5ff0000 192.168.1.6:/root/Desktop/root/boot/uImage;bootm a5ff0000";saveenv;boot'

setenv menu_2 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sda1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";setenv bootcmd "run bootusb";saveenv;boot'

setenv menu_3 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";setenv bootcmd "run bootusb";saveenv;boot'

setenv menu_4 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 ip=$ipaddr:$serverip:$gateway:$netmask quiet";setenv bootcmd "bootm a0060000";saveenv;boot'

saveenv

remember to customize where /root/Desktop/root is the directory you added to /etc/exports and ipaddr is the ip of your decoder, serverip is the ip of your nfs-server, gateway is your gateway ip, netmask is the mask of your home-net

6. now you can restart your decoder and press the relative remote controller's button for 5 seconds to start the image you want:

Press Button 1: start your image using nfs-server
Press Button 2: start your image using usb pendrive if you don't have a SATA hdd
Press Button 3: start your image using usb pendrive if you have a SATA hdd
Press Button 4: start your original flash image in the decoder (DGStation's original firmwares and images based on them)

That operation is necessary only the first time you want to change your boot commands. You don't need to press all the time you reboot the decoder a button to select wich image to start, simply do that only if you want to change to e2 nfs from usb, or from original images.

That's all, Tideglo
 
F

freaky12

Registered
Messages
22
Dont think that answers my original question to be honest i dont want to test i want to install it as if i want to full install it .

do i install the original dgs image or can i just flash it over the nlb one?
 
O

ovidiumarius

Registered
Messages
30
You can flash it over nlb firmware but after that you can't change ip adress.
Can someone explain how to change ip adress when enigma 2 is installed on flash ?
 
D

dorosk

Registered
Messages
100
For Flash Users:

English



To flash your stb use: rename firmware in usb_update.img and use usb stick with standard flash method . For ipbox9000 you can also use Flashtools and usb cable
set bootargs in this way:

codice:
setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 mem=128m ip=192.168.1.150:192.168.1.111:192.168.1.1:255.255 .255.0 coprocessor_mem=4m@0x10000000,4m@0x10400000

after write saveenv and reboot your stb.That's all

192.168.1.150 lan ip (decoder)
192.168.1.111 server ip address (your PC - you can set standard value,it's not important)
192.168.1.1 is gateway ip (your router)
255.255.255.0 this is netmask
 
L

levi45

Registered
Messages
474
dorosk said:
For Flash Users:

English



To flash your stb use: rename firmware in usb_update.img and use usb stick with standard flash method . For ipbox9000 you can also use Flashtools and usb cable
set bootargs in this way:

codice:
setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 mem=128m ip=192.168.1.150:192.168.1.111:192.168.1.1:255.255 .255.0 coprocessor_mem=4m@0x10000000,4m@0x10400000

after write saveenv and reboot your stb.That's all

192.168.1.150 lan ip (decoder)
192.168.1.111 server ip address (your PC - you can set standard value,it's not important)
192.168.1.1 is gateway ip (your router)
255.255.255.0 this is netmask
Click to expand...

whene and howe to set bootargs please thanks...
 
C

catseye

Registered
Messages
394
With mine, i flashed the box using flashtools & then switched off box, connected null modem cable, launch putty, select what com port its connected to & 115200 & open

Then switch box on & hit ctrl & z until the cuberevo bit appears on screen

Then amend the message to suit your set up, router addy, ip addy & box addy accordingly & type onto screen & press enter

& that should be it!

First impresions are its very smart & impresive
 
L

levi45

Registered
Messages
474
catseye said:
With mine, i flashed the box using flashtools & then switched off box, connected null modem cable, launch putty, select what com port its connected to & 115200& open

Then switch box on & hit ctrl & z until the cuberevo bit appears on screen

Then amend the message to suit your set up, router addy, ip addy & box addy accordingly & type onto screen & press enter

& that should be it!

First impresions are its very smart & impresive
Click to expand...

please can you give me all the info like is it on telnet or serial where did you put the 115200 wat is the host name or ip address wat is the saved sessions thanks...
 
C

catseye

Registered
Messages
394
When you open up putty, select serial, then alter com port -which port is your box connected to so type in com 1 or com 2
change speed from 9600 to 115200
select open on program

Then hold ctrl key & keep pressing z & switch box on

'console' should appear on front panel & u should get cuberevo on putty screen

Then type the txt, dont copy & paste message, thanks to tiesto80, for advice on that & type in your settings

For IP type in your pc ip, then your box ip, followed by router ip & follow previous instructions on txt that follows
 
F

freaky12

Registered
Messages
22
Hi,

I am trying to overwrite the RCS file in \etc\int.d using the new one for the gui fix using total commander however it will not allow me to overwrite. Am i suspoced to be using total commander? how do i overwrite the file i check the attruibutes and they are 755.

I also tryed to edit the resolve file i can download it but when i redit and upload using total commander again i cant overwrite the file on the nlb image i had previously i could.
 
A

acer2

Registered
Messages
199
freaky 12, did you do what you need. I had no problem overwrite file. I boot enigma, anda after up, you can with TC or DCC ( like me) FTP file and overwrite it.No problem.

regards
acer2
 
F

FakeLess

Registered
Messages
6
i think he used the flash version, enigma2 on flash doesn't allow you to edit rcS file and the resolv.conf file... i think this is a bug of flash version
 
A

acer2

Registered
Messages
199
Perhaps you are wright. But for me is always better to use usb stick ( in flash to put only checked version. I had no expiriences with enigma in flash.
regards
acer2
 
L

Lonely Raven

Registered
Messages
55
Flash version for install on receiver internal flash, like ABCOM\NLB\SIF images;
Other version for install on external USB stick.
 
You must log in or register to reply here.
Top