DM800 HD Tuner problem or what?

[HNaga]

I got booting process log
Many error scenarios

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #76 (20100419)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000133,00000133}
0.007 - fp init
0.008 - ca init
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
1.391 - load config
dCA: not existent, loading defaults
1.422 - config loaded.
* press to enter setup
OLED found!
BOOT #76(20100419)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
/flash/vmlinux.gz
<5>Linux version 2.6.18-7.3-dm800 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Wed Jun 2 18:15:26 CEST 2010
Fetching vars from bootloader... none present, using defaults.
board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
Detected 256 MB on board
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from


When Flashing SSL84B
It can not find autoexec.bat

booting bahvior seems strange

Any one faced those error?

 

[Ferret]

Mate im not going to pretend i understand all of those log errors.

Can you tell us what happening with the box itself that is not right ?

 

[HNaga]

I don't know what is happening myself

Now I can not get any image working on the internal falsh.
I don't know , may be those files not found because I'm flashing USB images not flash

In the past , it was mentioned that the image is for Internal or USB.

On the other hand even the old images that was working , are not working not

DM800 is not passing boot process , always restarts itself.
but with different errors as seem from the logging

I confirm that Power connection is faulty , but I'm sure that there is something worng , may be in the internal flash , may be in the SIM card security or something else

Where Can I order another SIM card online , I don't have paypal.?

 

[Ferret]

Hi mate

The sponsor sells sim2 boxes so maybe he can sell you a sim. Try him.

If not google brings up a few dealers.

So if you flash a image the box does not boot. Does it show any errors on front screen does it show any splash screens on the TV ?

 

[HNaga]

no error on the DM screen
I didn't check the TV as I can not connect DVI and serial at the same time.

 

[HNaga]

I found the error
It's the tuner.
I unplugged the tuner , everything worked fine
Plugging it again causes DM to infinite restarts

The tuner is rev K , is it better to repair it or to get Rev M instead?

 

[Ferret]

Rev m is the best clone tuner .

 

[HNaga]

Rev m is the best clone tuner .

Thanks Ferret.
I'm not expecting to repair it soon,I can not find a site with reasonable price and shipping cost.

I ordered VU+ Solo 2

I think I'll join VU+ posts.