how to get updates sky uk card

not too long hopefully .

no updates yet FFs i'll have to ring sky up & say we have been on holiday, do you know how to add Mgcamd as i beleive this will update my card

left it all night no joy & i did it exactly what you described, so this paticular set up does not work for updating entitlements, back to drawing board anyone know how to connect mgcamd with oscam/cccam ?

i know for a fact that this setup works as i use it myself .

i have helped so many others with the same setup & it works .

you have finished your entitilements & are looking to get new entitilements , that is a different scenario .

be patient . if it does not work put the card back in original box on sky1 & leave it there .

i have no problem ringing up sky to reactivate the card, but will it update using your conf, server & user, i dont wish to ring them up every month?

i appreciate all your help to date, but i just want it set up & forget

if it does not update say by the end of today , you should call sky & make some excuse & get it re-activated .

but put the card in the original box at that time .

once your re-activated the configs will update after that & that is a fact .

in the 1st month i updated the card in my original box & since then , i have seen with my own eyes the update taking place in webif .

ok thanks i'm gona ring sky now

once re-activated leave the card in the digibox for say 24hrs for all entitlements to come throgh .

tv channels back on took 2mins for sky to do it, just worried now about putting it back into my vu+ duo in case they send a nasty EMM

ok i've got most of the channels back on, except for some films in HD & sky sports HD, do i need to tweak something in my conf, server, user or cccam cfg

damn black screen now FFs

ok i've now got all of the channels back including the missing ones, i followed this tutorial on here & i've upgraded the oscam bin file from 5352 to 5938 & all is well

bit of an update, i've had to use cccam now, oscam went off half way through a tc programme & the picture just froze, the spinner was on display & nothing else, i left it for 10-15mins & ended up switching the box off at the mains as the stb would not respond to any commands on the remote, now oscam won't clear any channels, when i go into the web browser this is what is displayed:

2011/09/07 17:41:23 2BF004F8 r [videoguard2-reader] tier: 001d, expiry date: 2011/10/23-00:00:00
2011/09/07 17:41:23 2BF004F8 r [videoguard2-reader] tier: 30e1, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:23 2BF004F8 r [videoguard2-reader] tier: 30e2, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:23 2BF004F8 r [videoguard2-reader] tier: 30e3, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: 30e4, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: 30e5, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b732, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b736, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b765, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b766, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b772, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b773, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b846, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b860, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b8cc, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b8ce, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b8cf, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 2BF004F8 r [videoguard2-reader] tier: b8d2, expiry date: 2011/11/02-00:00:00
2011/09/07 17:41:24 0 s init for all local cards done
2011/09/07 17:41:24 0 s anti cascading disabled
2011/09/07 17:41:37 2BF01D00 c client connected to 15500 port
2011/09/07 17:41:37 2BF01D00 c encrypted newcamd:15500-client 127.0.0.1 granted (user, au=on (1 reader))
2011/09/07 17:41:37 2BF01D00 c user user authenticated successfully (CCcam)
2011/09/07 17:41:37 2BF01D00 c AU enabled for user user on reader skyuk
2011/09/07 17:41:42 2BF01D00 c user (0963&000000/0F0D/80:9E26): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:41:47 2BF01D00 c user (0963&000000/0F0D/80:8646): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:41:53 2BF01D00 c user (0963&000000/0F0D/80:AED5): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:42:01 2BF01D00 c user (0963&000000/0F0D/80:9745): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:42:09 2BF01D00 c user (0963&000000/0F0D/80:8D1F): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:42:17 2BF01D00 c user (0963&000000/0F0D/80:4107): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:42:25 2BF01D00 c user (0963&000000/0F0D/80:EDBA): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:42:33 2BF01D00 c user (0963&000000/0F0D/80:CCE2): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:42:41 2BF01D00 c user (0963&000000/0F0D/80:8F87): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:42:49 2BF01D00 c user (0963&000000/0F0D/80:5710): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:42:57 2BF01D00 c user (0963&000000/0F0D/80:C5F9): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 17:43:04 2BF01D00 c user (0963&000000/0F0D/80:727F): rejected group (120 ms) (of 0 avail 0) (no matching reader)

anyone any idea what the problem may be?

(no matching reader)

basically oscam has not found the reader .

it could not read ( bind ) the card .

if you stop cccam , stop oscam , restart oscam , restart cccam from the blue panel that should sort the problem mate .

ok it didn't work, this is what i did:

1. blue button select cam
2. chose common interface
3. chose oscam/cccam
4. black screen

2011/09/07 18:13:25 0 s init for all local cards done
2011/09/07 18:13:25 0 s anti cascading disabled
2011/09/07 18:13:36 552100 c client connected to 15500 port
2011/09/07 18:13:36 552100 c encrypted newcamd:15500-client 127.0.0.1 granted (user, au=on (1 reader))
2011/09/07 18:13:36 552100 c user user authenticated successfully (CCcam)
2011/09/07 18:13:36 552100 c AU enabled for user user on reader skyuk
2011/09/07 18:13:38 552100 c user (0963&000000/0F15/80:22B4): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:13:45 552100 c user (0963&000000/0F15/80:9D72): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:13:53 552100 c user (0963&000000/0F15/80A05): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:01 552100 c user (0963&000000/0F15/80:BD21): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:09 552100 c user (0963&000000/0F15/80:9CC4): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:16 552100 c user (0963&000000/0F15/80:58F2): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:24 552100 c user (0963&000000/0F15/80:E012): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:32 552100 c user (0963&000000/0F15/80:3CD7): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:40 552100 c user (0963&000000/0F15/80:90F9): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:48 552100 c user (0963&000000/0F15/80:112A): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:57 552100 c user (0963&000000/0F15/80:F6FF): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:15:05 552100 c user (0963&000000/0F15/80:E785): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:15:13 552100 c user (0963&000000/0F15/80:428E): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:15:21 552100 c user (0963&000000/0F15/80:677B): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:15:29 552100 c user (0963&000000/0F15/80:E3B7): rejected group (120 ms) (of 0 avail 0) (no matching reader)

would it be worth while using the other slot & changing the sci/0 to sci/1

btw stb is a vu+ duo running blackhole image

satpink said:

ok it didn't work, this is what i did:

1. blue button select cam
2. chose common interface
3. chose oscam/cccam
4. black screen

2011/09/07 18:13:25 0 s init for all local cards done
2011/09/07 18:13:25 0 s anti cascading disabled
2011/09/07 18:13:36 552100 c client connected to 15500 port
2011/09/07 18:13:36 552100 c encrypted newcamd:15500-client 127.0.0.1 granted (user, au=on (1 reader))
2011/09/07 18:13:36 552100 c user user authenticated successfully (CCcam)
2011/09/07 18:13:36 552100 c AU enabled for user user on reader skyuk
2011/09/07 18:13:38 552100 c user (0963&000000/0F15/80:22B4): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:13:45 552100 c user (0963&000000/0F15/80:9D72): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:13:53 552100 c user (0963&000000/0F15/80A05): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:01 552100 c user (0963&000000/0F15/80:BD21): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:09 552100 c user (0963&000000/0F15/80:9CC4): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:16 552100 c user (0963&000000/0F15/80:58F2): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:24 552100 c user (0963&000000/0F15/80:E012): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:32 552100 c user (0963&000000/0F15/80:3CD7): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:40 552100 c user (0963&000000/0F15/80:90F9): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:48 552100 c user (0963&000000/0F15/80:112A): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:14:57 552100 c user (0963&000000/0F15/80:F6FF): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:15:05 552100 c user (0963&000000/0F15/80:E785): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:15:13 552100 c user (0963&000000/0F15/80:428E): rejected group (120 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:15:21 552100 c user (0963&000000/0F15/80:677B): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2011/09/07 18:15:29 552100 c user (0963&000000/0F15/80:E3B7): rejected group (120 ms) (of 0 avail 0) (no matching reader)

would it be worth while using the other slot & changing the sci/0 to sci/1

Click to expand...

satpink said:

btw stb is a vu+ duo running blackhole image

Click to expand...

as your card was being read previously in the /dev/sci0 slot this should work again .

i think you have cccam+oscam as a combo emu ?

if so realistacally if you restarted oscam+cccam together it should work mate .

if the cams are individual then as i said before you need to stop cccam , stop oscam , restart oscam , restart cccam from blue panel .

or simply try a restart of the enigma & see what happens .

/dev/sci0 is the top slot .

yes my emu is combined already oscam/cccam i'll restart the gui & see what happens, thanks for your help

ok, and what is the result?? start to work , yes or not .

please post the result after restart.