DragonCrypt CAIDs Updater (C)FullDump
EDIT/MODIFY CAIDs in predator firmware.
If you don't know what caids please don't use it
original infos from dragon developper:
HOWEVER, the crypto ids registered by the cam are editable in the binary file.
At position 0x26B0 (for predator320 and others 0x36B0)
you will find them, structure is:
- 1 byte, number of CA IDS to register with the receiver.
- 1 byte value 00, do not change.
Then, the CA IDS, 2 byte each, big-endian.
There is room for 31 ids if you want to try if your receiver can handle more than 16.
Don't forget to change the first byte if you add or remove ids.
If you just change existing ids, there is no need to change the first bye.
Just in case you are unsure if you have the right file position:
in this distribution the CA ID structure is
10 -> number of ids, HEXADECIMAL remember....
00 -> Always 00 do not touch
01 00 05 00 17 02 0B 00 4A 70 06 04 06 02 06 22 -> the ca ids
17 62 18 00 06 06 0D 03 0D 00 09 61 09 0F 09 19
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00
COMPARE with caids updater tools and you see all caids showed CORRECTLY
Supported versions
------------------
Predator 312 to last firmware
Default Directories
-------------------
- DCCaidDatas -> CAIDs infos, can be updated via notepad or wordpad
Structure: caids number + caid label
- DCCaidTables -> Can be edited/modified via notepad or wordpad
Structure:
- Dummy Version
- Start Offset = Adress Offset at beginning datas
- Header Size -> 1 char= number of caids second char always equal to 0
- Datas Length -> size of datas used for CAIDS definition
- Size for each caids -> size of caids: stored in 2 bytes by default
- DCids -> Original Version and patched version => certificate file.
OPTIONS:
-------
- File checked before loading (fake file not accepted)
- Drag & drop available for table & predator firmware
- Caids.ini & predator3XX.cds can be edited/updated/created via notepad
- Original Caids.txt include all original caids datas from firmware & table used
HOW TO:
------
1/-Load Table & Firmware
2/-Edit/Modify Caids Datas:
Possible to add CAIDs in list box by double clic (new caid inserted in first blanc space (='0000')
or
Enter value manually
3/-Save file
NOTA: load correct table with DRA file for rigth editing (cf file Original Caids.txt)
EDIT/MODIFY CAIDs in predator firmware.
If you don't know what caids please don't use it
original infos from dragon developper:
HOWEVER, the crypto ids registered by the cam are editable in the binary file.
At position 0x26B0 (for predator320 and others 0x36B0)
you will find them, structure is:
- 1 byte, number of CA IDS to register with the receiver.
- 1 byte value 00, do not change.
Then, the CA IDS, 2 byte each, big-endian.
There is room for 31 ids if you want to try if your receiver can handle more than 16.
Don't forget to change the first byte if you add or remove ids.
If you just change existing ids, there is no need to change the first bye.
Just in case you are unsure if you have the right file position:
in this distribution the CA ID structure is
10 -> number of ids, HEXADECIMAL remember....
00 -> Always 00 do not touch
01 00 05 00 17 02 0B 00 4A 70 06 04 06 02 06 22 -> the ca ids
17 62 18 00 06 06 0D 03 0D 00 09 61 09 0F 09 19
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00
COMPARE with caids updater tools and you see all caids showed CORRECTLY
Supported versions
------------------
Predator 312 to last firmware
Default Directories
-------------------
- DCCaidDatas -> CAIDs infos, can be updated via notepad or wordpad
Structure: caids number + caid label
- DCCaidTables -> Can be edited/modified via notepad or wordpad
Structure:
- Dummy Version
- Start Offset = Adress Offset at beginning datas
- Header Size -> 1 char= number of caids second char always equal to 0
- Datas Length -> size of datas used for CAIDS definition
- Size for each caids -> size of caids: stored in 2 bytes by default
- DCids -> Original Version and patched version => certificate file.
OPTIONS:
-------
- File checked before loading (fake file not accepted)
- Drag & drop available for table & predator firmware
- Caids.ini & predator3XX.cds can be edited/updated/created via notepad
- Original Caids.txt include all original caids datas from firmware & table used
HOW TO:
------
1/-Load Table & Firmware
2/-Edit/Modify Caids Datas:
Possible to add CAIDs in list box by double clic (new caid inserted in first blanc space (='0000')
or
Enter value manually
3/-Save file
NOTA: load correct table with DRA file for rigth editing (cf file Original Caids.txt)