Go Back   Sat Universe > Other Receivers > D-Box > D-Box Chat

Note: Visitors from certain countries might see in-text advertising(underlind words in posts) or pop-under ads.
It is only shown to unregistered visitors or members that haven't made any posts. So you can easily get rid of it.

World-Of-Satellite

How to flash your DBox - the SW, the info, the tools, the lot...

D-Box Chat

Reply
  #1  
Old 23-01-2009, 15:30  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
gorski's Avatar
gorski gorski is offline
 
Join Date: Aug 2006
Posts: 1,555
Thanks: 266
Thanked 1,430 Times in 558 Posts
Country: Country Flag
Lightbulb How to flash your DBox - the SW, the info, the tools, the lot...

Sooooooooo, I finally had a chance, a little while back, to test the newest, ironed out version of PB-Enigma published on 31st December 2008, one can find here, for instance:

* Fixed Bootmanager
* small fixes

31.12.08
* mit ogg support
* interner Videotext geht nun ohne aktivierten Caching !

I will try to add the proggies and everything else you might need in this thread...

===HOW TO SHOVE A PB or any other image INTO YOUR LINUXED DBOX===

Use the Flashtool that I will post here: setup_dboxifa311 and then...

-install it to your PC, then
-start it from your Hallenberg folder, then
-choose an Image, then
-choose your PC's gadget over which you will connect with your DBoxom, then
-choose how you are connected [I only use the LAN cable via a router, so NO for Null Modem cable], then
-Start and hen DBox must NOT be plugged into electricity [you'll see a warning in a little window to unplug it], then
-click OK and then
-plug your DBox into the wall [electricity, as it's well known in the world ] and wait for the flashing process to finish/programming of your DBox to get done, that is...

If you do not succeed the first time, worry not, you will eventually. Frequently it does not "catch on" immediately. Just terminate the proggy on your PC, then unplug the DBox and repeat the procedure... Patience and you'll be dancing round the table naked, to the delight of your neighbours... or not, if you're not a beautiful, busty, bisexual blonde...

CONFIGURATION/SETUP

When it's all over just follow the TV prompts and answer the Qs...

If memory serves, firstly you will see a message to terminate the Flashing Tool and to unplug and plug back in the DBox.

There, it's so bloody easy and simple to put in a new Image into your Linuxed DBox, thanx to the maestros who wrote all that helpful stuff for everyone and for nothing, no money but the love of the hobby!!!

When your PB Enigma Image starts just answer the questions which the installation of PB Enigma 7.0x poses to you, namely the main configuration, in the sense of "which HW [hardware] have you got?" - simple...

Why is that important? Because PB Enigma Image 7.0x comes with various drivers for all kinds of possible setups - like different versions of DBox receivers [Nokia, Philips, Sagem, then version 1 or 2, then various additions, like built in HDD or additional memory etc.].

If, like me, you have nothing of the HW sort added to your DBox [I'm lying, actually, I do have a new kind of MultiCam or MC but I activate that later on in an Expert settings or some such Menu] then choose an option in the middle [Flash, I think] and anything else you might need. I can't remember right now all the details, like for instance were there any other questions after the first restart or boot. PB Enigma will then, allegedly, cleverly delete all the unnecessary drivers when you unplug your DBox and plug it back in.

Ergo, just continue going through various Menus and set it up according to your setup, to your HW and network gadgetry...

More to follow...
Attached Files
File Type: zip setup_dboxifa311.zip (2.11 MB, 155 views)
__________________
My avatar states: NO PEACE, NO PUSSY!!!

Go girls!!

Last edited by [email protected]; 23-01-2009 at 15:47.. Reason: Link for other board is not allowed here!!!
Reply With Quote
The Following 5 Users Say Thank You to gorski For This Useful Post:
irshada (07-10-2009), oys (23-01-2009), ozzy30 (12-11-2011), pierfo (25-11-2013), vegeku90 (23-01-2009)
  #2  
Old 23-01-2009, 15:50  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
gorski's Avatar
gorski gorski is offline
 
Join Date: Aug 2006
Posts: 1,555
Thanks: 266
Thanked 1,430 Times in 558 Posts
Country: Country Flag
Lightbulb

Now, you will need an FTP tool, like Total Commander [find it attached] to connect with your receiver, i.e. DBox, which, as I said, is connected either with your PC directly or via a router using the LAN cable, in order to shove essential files into your receiver and to be able to edit them, once they are in your DBox:

-start the TC
-go to FTP options
-give a name to your new connection, if you do not already have it
-put in your DBox address
-put in a username [usually: root]
-password [usually: dbox2 or whatever you choose]
-hit the Connect buton.

Once connected [TC with DBox] the first thing you need to do is put into the DBox the new camd.xml [which I will attach here] into your DBox. Put it exactly here:
var/tuxbox/config

All you need to do is to locate it in one part of the TC [your PC's HDD] and drag and drop from that side to the other side [which is your DBox's above mentioned folder].

Why? GBox can't work without it...
Attached Files
File Type: rar Total_20Commander_20v7.04a_20Multilingual_20WinALL_20Regged.rar (2.09 MB, 86 views)
File Type: rar camd.rar (318 Bytes, 54 views)
__________________
My avatar states: NO PEACE, NO PUSSY!!!

Go girls!!
Reply With Quote
The Following 5 Users Say Thank You to gorski For This Useful Post:
irshada (07-10-2009), [email protected] (23-01-2009), oys (23-01-2009), ozzy30 (15-06-2011), vegeku90 (23-01-2009)
  #3  
Old 23-01-2009, 16:03  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
gorski's Avatar
gorski gorski is offline
 
Join Date: Aug 2006
Posts: 1,555
Thanks: 266
Thanked 1,430 Times in 558 Posts
Country: Country Flag
Lightbulb

Then, put the GBox itself in [I will put it here, also - so all is in one place], precisely here and this is how::
var/bin: (needs o be modified to chmod 755, which in your TC is done like this: click once on a file you need to edit/modify, so that it's selected, then go to -> File -> Change Atributes -> change the number/value to 755 -> OK)

Then, add the additional files for GBox [cwshare.cfg, gbox_cfg, softcam.cfg ] which - you guessed it - will all be added here and put them into:
var/key [ident.info and ignore.list are recommended and they both go to the same place]

Then put in: gbox_cam.sh (also Change Attributes or in other words chmod 755) here:
var/script

One more thing: into var/keys put the cwshare.cfg file.

Details to follow...
Attached Files
File Type: zip gb225d-Nagra3.zip (285.1 KB, 56 views)
File Type: zip GBox keys and script files.zip (23.9 KB, 44 views)
__________________
My avatar states: NO PEACE, NO PUSSY!!!

Go girls!!
Reply With Quote
The Following 5 Users Say Thank You to gorski For This Useful Post:
arifaat (23-03-2012), irshada (07-10-2009), [email protected] (23-01-2009), oys (23-01-2009), vegeku90 (23-01-2009)
  #4  
Old 23-01-2009, 16:08  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
gorski's Avatar
gorski gorski is offline
 
Join Date: Aug 2006
Posts: 1,555
Thanks: 266
Thanked 1,430 Times in 558 Posts
Country: Country Flag
Exclamation

Oh, Christ, the Admin have gone bonkers...

Let's try to add the PB Enigma Image itself, since they can't be bothered and just go around deleting things in a vain attempt to pretend that other good forums - like theirs - do not exist and should be totally ignored...

The worst things is - even I, who started the thread, can't edit the top post, so must add it here, instead of where it should be [they could have done that but oh, no...]... Swell!
Attached Files
File Type: zip 31.12.08_18_41_2x_squashfs.zip (6.59 MB, 51 views)
__________________
My avatar states: NO PEACE, NO PUSSY!!!

Go girls!!

Last edited by gorski; 23-01-2009 at 16:23..
Reply With Quote
The Following 6 Users Say Thank You to gorski For This Useful Post:
irshada (07-10-2009), [email protected] (23-01-2009), oys (23-01-2009), ozzy30 (19-06-2011), teddyedward (01-02-2009), vegeku90 (23-01-2009)
  #5  
Old 23-01-2009, 16:12  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
k@lkov's Avatar
[email protected] k@lkov is offline
 
Join Date: Dec 2007
Location: Joe Louis Arena
Posts: 10,004
Thanks: 26,505
Thanked 38,943 Times in 8,801 Posts
Default PB images

Hello gorski, i hope you are OK.
I think that is not necessery, why?
Because we have that images here, where?
Ofcourse in D-Box Files section.


edit: i will almust forget. Thx for this mate, they are nice posts from you.
__________________
Note: Viewing Pay TV without a valid subscription is illegal
All the files available here are kept for experimental and educational purpose only
NO CARD SHARING DISCUSSIONS
No support via PM
Use the "THANKS" button
Read the next few threads and all will be OK:

---> RULES <---
---> RESPECT TO BE RESPECTED <---
---> ATTACHMENT DOWNLOAD LIMITS <---
---> THANKS BUTTON <---
---> SIGNATURE <---
http://www.sat-universe.com/imagehos...a5bf67c301.gif


Reply With Quote
The Following User Says Thank You to [email protected] For This Useful Post:
irshada (07-10-2009)
  #6  
Old 23-01-2009, 16:22  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
gorski's Avatar
gorski gorski is offline
 
Join Date: Aug 2006
Posts: 1,555
Thanks: 266
Thanked 1,430 Times in 558 Posts
Country: Country Flag
Talking

Hehe, I'm OK, thanx. Hope you're deedlin' fine, too. Good to see there are people who can take a joke!!!

Didn't see the Image here, which is why I... It just saves time, not to have to do it ALL, you know... But OK, if Your Majesty insists...
__________________
My avatar states: NO PEACE, NO PUSSY!!!

Go girls!!
Reply With Quote
The Following User Says Thank You to gorski For This Useful Post:
irshada (07-10-2009)
  #7  
Old 23-01-2009, 16:33  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
gorski's Avatar
gorski gorski is offline
 
Join Date: Aug 2006
Posts: 1,555
Thanks: 266
Thanked 1,430 Times in 558 Posts
Country: Country Flag
Wink CS and GBox on DBox...

OK, now the Card Sharing details [here is something I prepared earlier in the Samsung section, slightly edited... ]:

Card Sharing is:

connecting your receiver [in this case DBox] with a specific SW in your receiver [PB Enigma plus GBox (installed on your DBox also)

with your friends' receivers or PCs.

They will have Original Smart Cards [OSCs] you do NOT have, in order to watch the programs those OSCs open.

You connect with them via the internet.

With CS you have those cards virtually. But you can still watch the programs those OSCs can open, provided your friends are constantly "online" and you can connect to their receiver or PC.

Your DBox, btw, is connected to the net via your router, i.e. a LAN cable.

And now the "How to" in small steps:

First, create a DynDNS account. It's free.

Go to
Code:
w*w.dyndns.org
->
go to “Account”/"create account”.
Once you enter all the details and create an account, get the confirmation email go to ->
Services”.
There you will select Dynamic DNS [even if your IP doesn't change all the time, but very rarely] ->
then select “Add Dynamic DNS”.
Just create the name you want and do not use Enable wildcard or Mailexchanger.
Click Add host.
It's done!!

After that put the DynDNS details into your Router to enable your DynDNS Service updater in it, so DynDNS Service is updated every time you change your IP address and your friends can find you through the DynDNS address. Namely, in your router's DDNS options [if you have more than one]:
choose DynDNS, then ->
put your newly created DynDNS username, then
password, then
Hostname [like myname.dyndns.org - this is just an example, create your own name!!].

That address you just created is always going to be the same, even though your IP address might change every time you logon/get online/boot your PC.
Now SAVE all that or APPLY or ENABLE, whatever is in your Router's interface.

OK so far?

After that you need to forward some ports in your Router. That allows your GBox to go to the net and connect with other PCs, in this case a Server with your friends' cards, the stuff you want to watch...

Code:
http://www.portforward.com/
Code:
http://www.portforward.com/routers.htm
================UltraEdit32==============

Now, install UltraEdit32 on your PC. Why? Because you need to sort your cwshare.cfg yourself. Here is the template you need to Copy and Paste into UltraEdit 32, NOT Notepad, Wordpad or anything else!!! One can find good, freeware alternatives on the net, like UEStudio `06, for instance.

In cwshare.cfg you will edit the yourdyndns.org and yourfriendsdyndns.whatever with the data you are given from the people you trust, like theirport but also yourport, the one you assign to your GBox, so it can go to the net. Also yourpass and hispass! JUST REPLACE THEM AS INDICATED BELLOW, IT IS EASY!!! Don't give up on me now!!!

That's all you need to do for DBox's GBox to work your CS magic. Nothing else. No other files except cwshare.cfg, if you did exactly as previously described above!!!

===============cwshare.cfg=============

Lines with # in front are not taken into account, do not matter, these are explanations. Leave them be.

Quote:
M: { your.dyndns.org { yourpass }}
# Internet Friends port range password cod
D: { yourfriendsdyndns.whatever { yourport theirport { hispass { A3 A3 }}}}
#================================================
# allow maximum 3 share level for received card data
I: { 3 }
# Send ECM's at maximum 7 cards (please use this as default)
X: { 7 }
#
# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is wrong
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 5000 send ecm again after 5 Seconds if no reply.
# 7000 resync decode after 7 Seconds if net decode failed
N: { 01 01 03 00 5000 7000 }
Your pass will be 8 signs, letters from A - F, if memory serves, numbers from 1-9.

Just Copy and Paste this into your Ultra Edit 32 and edit CAREFULLY, preserving the empty slots [pauses/breaks], then Save.

==============To recapitulate:=================

You have created a DynDNS account and enabled it in your router, forwarded some ports.

You have installed UE32 and created a GBox folder [just unpack your GBox in that folder] on your PC.

In your cwshare.cfg file, that is a part of GBox CS SW, you have put your DynDNS details and the password for your GBox, plus the ports you have opened/forwarded in your Router for it to operate freely.

You have also put your friend's details [their DynDNS address, password and port they opened for you to hook onto their GBox server] into the cwshare.cfg.

Now reboot your DBox.

Start your GBox with the newly edited cwshare.cfg, that you put into the GBox folder, as described above.

You should see some colours on your TV screen - that is, IF you are connected, if everything is properly sorted.

Change the channel to another encrypted channel in the same package, as described above [1 system of encryption].

Hopefully you will see the picture now.

=================A few more notes:====================

GBox is no perfect and so sometimes you will have to reboot or restsrt the EMU etc.

When you start the GBox: in your Firewall you will have the GBox active under programs and it must have the free access to the net. Give it the permission it needs.

In your Router you must do the Port Forwarding. In my modem it's under Applications and Gaming -> Port Range Forwarding.

You name an application [say GBox for your GBox CS SW or maybe name it after your friend, as you may open many ports for GBox and each should be named after your friend].

Put the Port Range as follows:

-your port [the one you have to give to your friend to put into his cwsahre.cfg, together with your DynDNS and Pass] and the same port should be in Start and End little box, then UDP or Both Protocols, and add your IP address, plus tick it at the end, so it is active. {At least that is how it is in my Linksys Router.}

-his port - the one he gave you, where you will be let into his machine, just do the same as above but name it after your friend, so you know which one is which.

-check your address by clicking on the Network Icon in the Systray -> Support and you'll see it. Occasionally it may change, if you get another device connected to the network, so check it, if GBox is not working. It looks normally something like 192.168.1.101 or so.

Now go to the bottom of the page and SAVE SETTINGS! If you did it the right way it should all be saved and you will see it the way you want it to be right in front of you.

Cheers and good luck!!

[I need a drink after all this... After that I need a holiday... FFS...]
__________________
My avatar states: NO PEACE, NO PUSSY!!!

Go girls!!
Reply With Quote
The Following 2 Users Say Thank You to gorski For This Useful Post:
irshada (07-10-2009), oys (23-01-2009)
  #8  
Old 23-01-2009, 16:40  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
gorski's Avatar
gorski gorski is offline
 
Join Date: Aug 2006
Posts: 1,555
Thanks: 266
Thanked 1,430 Times in 558 Posts
Country: Country Flag
Wink

If you wanna control your GBox from DBox itself, via remote control, then search the net or even this forum for GBox Control Centre and similar plugins:

Quote:
GBox Suite v 2.30

cfg > CHMOD 644
SO > CHMOD 755 (atribute chmod 755, as described above)

(c) Dicaprio 2006
Anyone tried FSNES plugin for GBox in DBoxu?

Code:
http://www.fsenes.info/how_to/gbo.html
Attached Files
File Type: rar Gbox_Control_Center-_Gbox_Suite-Plugins.rar (307.4 KB, 24 views)
File Type: rar GBoxCenterv1.5.0.rar (144.0 KB, 22 views)
__________________
My avatar states: NO PEACE, NO PUSSY!!!

Go girls!!
Reply With Quote
The Following 3 Users Say Thank You to gorski For This Useful Post:
irshada (07-10-2009), oys (23-01-2009), prifon55 (17-03-2012)
  #9  
Old 23-01-2009, 16:49  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
gorski's Avatar
gorski gorski is offline
 
Join Date: Aug 2006
Posts: 1,555
Thanks: 266
Thanked 1,430 Times in 558 Posts
Country: Country Flag
Wink And finally...

My settingsa/channel list, from 28'E do 43'W, for which I used Pet list as a template, but I edited it a bit, and given half a chance, I will do more of that, if only I get a dish installed... any time soon.....

Plus an editor which works well with this version of the PB Enigma Image 7.0x!!!

Btw, not sure how I can stop DBox from scanning a satellite position, once on it/searching for new channels all the time... if I can switch it off, that is... It does do that quite well, I have to say...

Btw, you can always download - if your DBox is connected directly to the net via a LAN cable - via online updates the latest:

Key files

Emu's

sat xml files

and a lot more...

Just explore your DBox's Menu's and try and learn...

But most importanly: HAVE PHUNNNNNNNNN!!!!!!!!!!!!!!!!!!!!!!!!!!!
Attached Files
File Type: zip DreamBoxEdit-3.0.0.0.zip (1.21 MB, 30 views)
File Type: zip 8.1.09.zip (205.5 KB, 20 views)
__________________
My avatar states: NO PEACE, NO PUSSY!!!

Go girls!!
Reply With Quote
The Following 3 Users Say Thank You to gorski For This Useful Post:
Haggis (13-02-2009), irshada (07-10-2009), zendalo (05-10-2009)
  #10  
Old 23-03-2010, 00:38  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
niffy niffy is offline
Junior Member
 
Join Date: Mar 2010
Posts: 1
Thanks: 1
Thanked 0 Times in 0 Posts
Country: Country Flag
Thumbs up dbox issues

Many thanks guys for these fantastic and interesting ideas.

Efforts really appreciated.

More grease to your elbow!!!


Last edited by niffy; 23-03-2010 at 00:39.. Reason: correction
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 14:12.


Powered by vBulletin
Copyright ©2006-2019 - Sat Universe