Hello. I am trying to catch satellite feeds, but 99% of feed transponders I just cant see. My setup is:
2M anthenna
TBS 6903 PC card
not sure about receiver (was bought and installed by professional)
software - CrazyScan, EBSpro, DVBdream.
Ill try to describe my problem: All satellites which i should see are visible with good signal. All open chaneels i can open and watch without any problems. But when i am trying to scan for feed transponders - I just cannot see.
For example: on 28E satellite there is now some sports feed:
Frequence: 12693 - Pol: H - SR: 7200 - FEC: NC
But when i blindscanning (all soft same results) last transponder on horizontal polarization which i can lock is 12227 on this satellite. And this problem with almost all feeds when transponders frequence is close to scanning range end.
Sorry for my poor english, hope I described my problem well enough to understand it. Hope someone can help me deal with it.
2M anthenna
TBS 6903 PC card
not sure about receiver (was bought and installed by professional)
software - CrazyScan, EBSpro, DVBdream.
Ill try to describe my problem: All satellites which i should see are visible with good signal. All open chaneels i can open and watch without any problems. But when i am trying to scan for feed transponders - I just cannot see.
For example: on 28E satellite there is now some sports feed:
Frequence: 12693 - Pol: H - SR: 7200 - FEC: NC
But when i blindscanning (all soft same results) last transponder on horizontal polarization which i can lock is 12227 on this satellite. And this problem with almost all feeds when transponders frequence is close to scanning range end.
Sorry for my poor english, hope I described my problem well enough to understand it. Hope someone can help me deal with it.