Daily patch for Azbox HD
- Thread starter juli13
- Start date
Daily FW 0.9.4461
hostname fix | dts fix (rc1) | improved photo player (max size: 2047px - increased soon) and aspect ratio | corrected epg reservation if canceled | stored tuner/streaming settings | iptv record/epg
http://fw.azupd.com/
hostname fix | dts fix (rc1) | improved photo player (max size: 2047px - increased soon) and aspect ratio | corrected epg reservation if canceled | stored tuner/streaming settings | iptv record/epg
http://fw.azupd.com/
You must re-install the NEW OpenXCAS for MultiCAS to work!!!
It will work, using your old MultiCAS from the previous FW + telesat's MultiCASedit! Beware, not all is OK with the new OpenXCAS and therefore MultiCAS!
============PROCEDURE===========
0) I put patch.bin on my USB memory stick and inserted it into AZbox HD.
Used my remote:
1) Home -> Setings -> Backup -> [to your USB stick] Channel list. No point in saving the Plugins like this, since we have to re-install OpenXCAS from scratch. Back them up via FileZilla Client, though! Make sure you have the new MultiCAS installed, then back it up!
2) [optional - if not, go to step 4!] Home -> Settings -> Data Reset -> PIN [0000] -> Delete all channels, then Delete plugins, then Factory Reset -> machine reboots.
3) [optional] Upgrade Menu: Format application area -> OK -> when done press Exit key.
4) Upgrade Menu -> USB -> press OK to upgrade with FW 4461.
When done AZbox HD reboots.
5) [optional] Settings Menu -> Data Reset -> Factory Setting -> OK, to do the reset -> confirm. AZ HD should now reboot, again. It should now be as clean as possible, from the old stuff in it...
6) [optional but necessary, if done steps 2, 3 & 5] Setup -> System Information -> Backup/Restore -> Channel -> choose where you put it beforehand, when you backed it up -> OK -> it will tell you if it was successful... You have your old settings list back in your AZbox HD. But I had to redo my DiSEqC 1.1 settings, as not everything was restored.
To back-up and restore your channel/settings list, you can also use Morser's MaZ program, telesat's channel editor or SetEdit for AZ HD. These programs should preserve all your settings properly, including the DiSEqC ones!
7) [optional but necessary, if done steps 2, 3 & 5] Now, sort out all the settings according to your needs [I go for Language, HDMI, 1080p, DHCP, Network (DynDNS etc.) etc. etc.].
When done check out the picture quality etc.
Now, download/install OpenXCAS first and then MultiCAS. After that restore the rest of your Plugins. So...8) Home -> Plugins -> red button on your remote -> azboxworld link -> OK -> OpenXCAS. When it is done - reboot!
9) Home -> Plugins -> OpenXCAS -> Download Executable -> MultiCAS version 1.62B.After that go to Download Config for MultiCAS.
But! Since there is a problem going into the MultiCAS menu to activate and edit it - I had to restore some of the files using FileZilla [I did: module, splitterdata txt and bin, plus Data9F files], as described in my "Alternative Guide..."
Make sure the module and other relevant files are given the 755 ["CHMOD"] Attributes, as described in my "guide"!!!
Then, I started telesat's MultiCASedit and I messed with it to make it work: in "Splitter & CCcam" tab I clicked on "Receive from AZbox HD", then I clicked on "Sent to AZbox", to activate it.
I also restored the rest of my Emus/CS SW/plugins and other files in Plugins and OpenXCAS. Again, all the modules and other relevant files must be given the 755 ["CHMOD"] Attributes.
Make sure you have module.seq file in OpenXCAS folder. Mine looks like this:
All was working, all my EMUs/CS SW/Plugins.
Once again: some buttons/functions in some menus, for some EMUs - are not working 100% properly [read "as before"], as you will see: EXIT button etc.
It will work, using your old MultiCAS from the previous FW + telesat's MultiCASedit! Beware, not all is OK with the new OpenXCAS and therefore MultiCAS!
============PROCEDURE===========
0) I put patch.bin on my USB memory stick and inserted it into AZbox HD.
Used my remote:
1) Home -> Setings -> Backup -> [to your USB stick] Channel list. No point in saving the Plugins like this, since we have to re-install OpenXCAS from scratch. Back them up via FileZilla Client, though! Make sure you have the new MultiCAS installed, then back it up!
2) [optional - if not, go to step 4!] Home -> Settings -> Data Reset -> PIN [0000] -> Delete all channels, then Delete plugins, then Factory Reset -> machine reboots.
3) [optional] Upgrade Menu: Format application area -> OK -> when done press Exit key.
4) Upgrade Menu -> USB -> press OK to upgrade with FW 4461.
When done AZbox HD reboots.
5) [optional] Settings Menu -> Data Reset -> Factory Setting -> OK, to do the reset -> confirm. AZ HD should now reboot, again. It should now be as clean as possible, from the old stuff in it...
6) [optional but necessary, if done steps 2, 3 & 5] Setup -> System Information -> Backup/Restore -> Channel -> choose where you put it beforehand, when you backed it up -> OK -> it will tell you if it was successful... You have your old settings list back in your AZbox HD. But I had to redo my DiSEqC 1.1 settings, as not everything was restored.
To back-up and restore your channel/settings list, you can also use Morser's MaZ program, telesat's channel editor or SetEdit for AZ HD. These programs should preserve all your settings properly, including the DiSEqC ones!
7) [optional but necessary, if done steps 2, 3 & 5] Now, sort out all the settings according to your needs [I go for Language, HDMI, 1080p, DHCP, Network (DynDNS etc.) etc. etc.].
When done check out the picture quality etc.
Now, download/install OpenXCAS first and then MultiCAS. After that restore the rest of your Plugins. So...8) Home -> Plugins -> red button on your remote -> azboxworld link -> OK -> OpenXCAS. When it is done - reboot!
9) Home -> Plugins -> OpenXCAS -> Download Executable -> MultiCAS version 1.62B.After that go to Download Config for MultiCAS.
But! Since there is a problem going into the MultiCAS menu to activate and edit it - I had to restore some of the files using FileZilla [I did: module, splitterdata txt and bin, plus Data9F files], as described in my "Alternative Guide..."
Make sure the module and other relevant files are given the 755 ["CHMOD"] Attributes, as described in my "guide"!!!
Then, I started telesat's MultiCASedit and I messed with it to make it work: in "Splitter & CCcam" tab I clicked on "Receive from AZbox HD", then I clicked on "Sent to AZbox", to activate it.
I also restored the rest of my Emus/CS SW/plugins and other files in Plugins and OpenXCAS. Again, all the modules and other relevant files must be given the 755 ["CHMOD"] Attributes.
Make sure you have module.seq file in OpenXCAS folder. Mine looks like this:
When I was done I rebooted!
All was working, all my EMUs/CS SW/Plugins.
Once again: some buttons/functions in some menus, for some EMUs - are not working 100% properly [read "as before"], as you will see: EXIT button etc.
- Messages
- 17,767
azbox 0.9.4625 patch
azbox 0.9.4625 patch
Code:
- play iptv recordings from tv
- fixed drop of iptv audio packets when playing recordings
- added photo service menu
- iptv: fixed url addressazbox 0.9.4625 patch
Doctor Who
Registered
- Messages
- 81
Doctor Who
Registered
- Messages
- 81
New patch 0.9.4717
Appena rilasciata
* fixed flac support
* fixed ogg support
* fixed broken epg
* improved blindscan speed
* fixed recording from standby
DOWNLOAD patch 0.9.4717
Appena rilasciata
* fixed flac support
* fixed ogg support
* fixed broken epg
* improved blindscan speed
* fixed recording from standby
DOWNLOAD patch 0.9.4717
Doctor Who
Registered
- Messages
- 81
Link Megaupload
azbox-0.9.4749-patch.bin
azbox-0.9.4749-patch.bin
Code:
hostname fix
channel manager fix
smi subtitles fix
removed subtitle shadowDOWNLOAD
DOWNLOAD MULTI
Last edited:
streamliner
Registered
- Messages
- 4
Code:
* fixed sleep timer
* removed black borders in teletext (subtitles)
* increased epg stability
* fixed microdvd parser
* fixed mkv parser with mpeg1/mpeg2
Code:
http://www.multiupload.com/2JBF7GZ6H1Doctor Who
Registered
- Messages
- 81
prebeta azbox 0.9.4923
Rilascio di questa sera
* added new movie subtitle menu option
* fixed seek in wma
* fixed detection of avi duration time
* corrected sub file format
DOWNLOAD Patch 0.9.4923
Rilascio di questa sera
* added new movie subtitle menu option
* fixed seek in wma
* fixed detection of avi duration time
* corrected sub file format
DOWNLOAD Patch 0.9.4923
firmware 0.9.4991
firmware 0.9.4991
changelog:
qui il download:
http://www.multiupload.com/0KXJW5YM0T
firmware 0.9.4991
changelog:
qui il download:
http://www.multiupload.com/0KXJW5YM0T