Exclusive AzBox , Mgcamd 1.35 With CCcam Support and Via 2.6 HACK

MGcamd for AZbox HD Full with GBox and CCcam Clients!!!

Working VERY well... Very good job, very cool!!!

Now, can we have Mbox added, too, please...

Oh, Kanber_Kav, m8: can we have a nice mgcamd.info plugin with GBox and CCcamd details, please... :thum:

==============================

Try the file attached to this message...

This is what I did:

-added the Via 2.6 keys to SoftCam.Key,
-added AutoRoll.Key,
-edited the mgcamd_cfg [G line to 41 = 01 Newcamd + 08 GBox + 32 CCcamd].

Then, one must:

-rename peer.cfg.example and cccamd.list.example to
peer.cfg and cccamd.list by right clicking on it -> Rename -> delete the surplus, then hit Enter on one's keyboard,
-edit peer.cfg and cccamd.list as below, then "Save" them...

peer.cfg:

M: { my.dyndns.something { mypass}}
#
D: { peer’sserver.dyndns.something { myport hisport { hispass { A3 A3 }}}}
D: { peer’sserver.dyndns.something { myport hisport { hispass { A3 A3 }}}}

Click to expand...

cccamd.list:

C: peer.DynDNS.something port username password

Click to expand...

Now, send them to mgcamd folder in your AZbox HD via FTP.

Give CHMOD -> 755 to mgcamd and AutoRoll.Key.

This is just to be a client.

Dunno if what I did was 100% correct but it works. :nana: Tested! :clapping:

If you do not know how to do some of these basic functions, see my "Alternative Guide" for much more detail... :thum:

=====================

If you have an original card and you want to combine MGcamd with NewCS card reader/server you will have to edit it some more...

See my "Alternative Guide..." for more detailed info...

Good luck!:thum:

It is the truth?
Because the identical size 1.35 and 1.35a.
And Via 2.6 running on 1.35a.

To see the mgcamd info ON-SCREEN [on your TV] by pressing the "> >" button on your Remote Control Unit [RCU], open your openxcas.conf and edit it like this:

[module]
name = mgcamd
daemon = mgcamd
version = 1.35a
# argument = -a 3
INFO = /tmp/ecm.info
REFRESH = 2

Click to expand...

Save it, restart and then try...

Ta to crazy2! :thum:

Is this version solves a problem with the message in log
"Warning Both CWS Changed!"? Anybody knows?

Unfortunately this version bad as well as old.
At it the same problem "Warning Both CWS Changed!".:mecry:
It is very a pity that founders of mgcamd do not deal with this problem.

New 135a have the same problem. It is bad.
Look at log

Jan 26 20:04:51 192.168.1.15 tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:41)
Jan 26 20:04:51 192.168.1.15 [mg] Net:1:1:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.1.10:514 Reread:0
Jan 26 20:04:51 192.168.1.15 [mg] Ecm cache time: 15
Jan 26 20:04:51 192.168.1.15 Box type: azbox

Jan 26 20:09:16 192.168.1.15 ECM to newcamd ***
Jan 26 20:09:16 192.168.1.15 [mg0] <- CW from newcamd ***(588ms)
Jan 26 20:09:16 192.168.1.15 [mg0] 588 msec -- Tue Jan 26 17:05:09 2010
Jan 26 20:09:16 192.168.1.15 ===== Viaccess ECM on CaID 0x0500, pid 0x0fa1 ======
Jan 26 20:09:16 192.168.1.15 prov: 023700
Jan 26 20:09:16 192.168.1.15 cw0:0 D1 15 18 FE 30 09 C0 F9
Jan 26 20:09:16 192.168.1.15 cw1:0 12 80 DA 6C 8A C6 A9 F9
Jan 26 20:09:47 192.168.1.15 ECM to newcamd ***
Jan 26 20:09:47 192.168.1.15 [mg0] <- CW from newcamd *** (64ms)
Jan 26 20:09:47 192.168.1.15 [mg0] WARNING, both cws changed !
Jan 26 20:09:47 192.168.1.15 [mg0] 64 msec -- Tue Jan 26 17:05:40 2010
Jan 26 20:09:47 192.168.1.15 ===== Viaccess ECM on CaID 0x0500, pid 0x0fa1 ======
Jan 26 20:09:47 192.168.1.15 prov: 023700
Jan 26 20:09:47 192.168.1.15 cw0:0 F0 27 7A 91 D0 E2 F0 A2
Jan 26 20:09:47 192.168.1.15 cw1:0 86 2E C7 7B E4 0F 54 47

DEVILS said:

Mgcamd 1.35 Full Support CCcam , no more freeeeez in azbox , all are working fine , you can record fine also in encrypting channel
Azbox Grow Up
Thanks For All Hwo Help to devlope the Mgcamd

Click to expand...

tell me you joking .......regarding no freeze.....

ecm time 0.498ms .........

Yeah, I have drop-outs... Re-connects are not easy... So, something is not quite right, it seems to me...

It's on the right track now but some improvement is needed...

I think that founders mgcamd never saw, how their creation works on AzBox. It is sad.

Hi gorski,
Sometimes I need to use my Azbox without internet connection, and i would like to know if we can update trough the USB with a pendrive.
Do you know any utility to do that?
Thank's a lot for your help.
dirigu

mgcamd freezing

my mgcamd starts to freeze after 20 min of work, i use it as a cccam client and i have 2 lines, any ideas?

Bugs. We wait for new releases...

mgcamd

thanks, i can finally stop trying to fix it, btw ,i have a question for you about multicas but i cant find any thread related to multicas problems

makikaki said:

my mgcamd starts to freeze after 20 min of work, i use it as a cccam client and i have 2 lines, any ideas?

Click to expand...

Hi,

Have you solved this issue? I have the same problem.
Please let me know how it would be possible to fix it.


Thanks