Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

Ramboide

Ramboide

Registered
Messages
202
bkatbim said:
hi, what`s your receiver. all channels working fine!
Click to expand...

My receiver is Octagon SF 4008 and my question were if AMCN-Iberia channels work. And I also wonder if the new Qviart can make work absolutely all the DTT channels.
 
Last edited:
Ramboide

Ramboide

Registered
Messages
202
I have found the solutions to sound issues of DTT channels after updating to last version of OPenATV 6.2. The solution is to replace the file the drivers, a file named "linuxtv.ko" found here, work perfectly:

https://octagon-forum.eu/threads/no-audio-on-most-of-all-stream-relay-and-t2-mi-channels.2800/

Direct link to download it:
https://octagon-forum.eu/test-team/sf4008/sf4008-drivers-4.1.37-6.3.0-20170515.zip

The file of drivers ("linuxtv.ko") are in the folder:
lib\modules\4.1.37\extra

I recommend to save a copy of the original file. In case that the receiver remains in "booting...", it only happens if the file replaced is from other version of the image, or another image, the file can be replaced for the original file from the PC via LAN, then switch off the receiver and switch it on again, the receiver turns on again.
 
Last edited:
C

chelo71

Super VIP
Messages
1,660
Ramboide said:
I have found the solutions to sound issues of DTT channels after updating to last version of OPenATV 6.2. The solution is to replace the file the drivers, a file named "linuxtv.ko" found here, work perfectly:

https://octagon-forum.eu/threads/no-audio-on-most-of-all-stream-relay-and-t2-mi-channels.2800/

Direct link to download it:
https://octagon-forum.eu/test-team/sf4008/sf4008-drivers-4.1.37-6.3.0-20170515.zip

The file of drivers ("linuxtv.ko") are in the folder:
lib\modules\4.1.37\extra

I recommend to save a copy of the original file. In case that the receiver remains in "booting...", it only happens if the file replaced is from other version of the image, or another image, the file can be replaced for the original file from the PC via LAN, then switch off the receiver and switch it on again, the receiver turns on again.
Click to expand...

posso avere un tuo backup?
 
V

viliev

Registered
Messages
52
HELP for ABERTIS

chelo71 said:
posso avere un tuo backup?
Click to expand...

Ihave Vu+zero with SatDreamGR 6 image and I made all instructions for to set it for Hispasat Abertis channels, BUT it doesn't work. I have good signal (86%).
PLEASE can give me detailed instructions (and files please)how to set sat. receiver for Abertis channels.
 
R

rom20051

Registered
Messages
73
viliev said:
Ihave Vu+zero with SatDreamGR 6 image and I made all instructions for to set it for Hispasat Abertis channels, BUT it doesn't work. I have good signal (86%).
PLEASE can give me detailed instructions (and files please)how to set sat. receiver for Abertis channels.
Click to expand...
Abertis works bad with VU+ Zero. Freezing, freezing. Loss of time, I do not recommend it.
 
P

Paracelso

Registered
Messages
9
Hola..
¿Alguien puede ayudarme con una copia de seguridad para trabajar para VU + Zero 4k?
He seguido todo el manual en este foro, pero sólo tengo una pantalla en negro, en el registro de la oscam no tengo ninguna clave válida... alguien para ayudar?

Gracias
 
P

Paracelso

Registered
Messages
9
Hello..
Can someone help me with a backup to work for VU + zero 4k?
I followed the entire manual on this forum but I just have a black screen, in the log of the Oscam I have no valid key... someone to help?

Thank you
 
P

Paracelso

Registered
Messages
9
Hello..
Can someone help me with a backup to work for VU + zero 4k?
I followed the entire manual on this forum but I just have a black screen, in the log of the Oscam I have no valid key... someone to help?

Thank you
 
EnoSat

EnoSat

Senior Member
Messages
1,978
Paracelso said:
Hello..
Can someone help me with a backup to work for VU + zero 4k?
I followed the entire manual on this forum but I just have a black screen, in the log of the Oscam I have no valid key... someone to help?

Thank you
Click to expand...

all in first post
 
P

Paracelso

Registered
Messages
9
I followed all the steps in the manual... and just get a black screen... use Firmware version: Openatv 6.2.0 (2018-09-26)
 
P

Paracelso

Registered
Messages
9
Someone to help please?
======================

2018/10/29 19:23:06 00000000 s (main) System name = Linux
2018/10/29 19:23:06 00000000 s (main) Host name = vuzero4k
2018/10/29 19:23:06 00000000 s (main) Release = 4.1.20-1.9
2018/10/29 19:23:06 00000000 s (main) Version = #1 SMP Thu Feb 8 14:32:58 CET 2018
2018/10/29 19:23:06 00000000 s (main) Machine = armv7l
2018/10/29 19:23:06 00000000 s (main) Stb model = dm8000
2018/10/29 19:23:06 00000000 s (main) Stb vumodel = vuzero4k
2018/10/29 19:23:06 00000000 s (main) Stb boxtype = vuzero4k
2018/10/29 19:23:06 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1464
2018/10/29 19:23:06 00000000 s (emu) OSCam-Emu version 774
2018/10/29 19:23:06 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/10/29 19:23:06 00000000 s (main) signal handling initialized
2018/10/29 19:23:06 00000000 s (led) LED support is not active. Can't detect machine type.
2018/10/29 19:23:06 00000000 s (reader) emulator [emu] creating thread for device /usr/keys/oscam_atv_emu/SoftCam.Key
2018/10/29 19:23:06 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/10/29 19:23:06 00000000 s (main) waiting for local card init
2018/10/29 19:23:06 2F3B8B4F r (emu) Stream key delayer initialized
2018/10/29 19:23:06 2F3B8B4F r (emu) Stream relay server initialized
2018/10/29 19:23:06 2F3B8B4F r (reader) emulator [emu] Reader initialized (device=/usr/keys/oscam_atv_emu/SoftCam.Key, detect=cd, mhz=357, cardmhz=357)
2018/10/29 19:23:06 00000000 (emu) INFO: FFDecsa parallel mode = 32
2018/10/29 19:23:06 36D94A7B h (webif) webif: decompressed 178919 bytes back into 441816 bytes
2018/10/29 19:23:06 36D94A7B h (webif) HTTP Server running. ip=:: port=83
2018/10/29 19:23:07 2F3B8B4F r (reader) emulator [emu] card detected
2018/10/29 19:23:08 2F3B8B4F r (reader) emulator [emu] found card system emu
2018/10/29 19:23:08 2F3B8B4F r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/10/29 19:23:08 2F3B8B4F r (emu) Reading key file: /usr/keys/oscam_atv_emu/SoftCam.Key
2018/10/29 19:23:08 2F3B8B4F r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:17 P:0 D:0 T:0
2018/10/29 19:23:09 00000000 s (main) init for all local cards done
2018/10/29 19:23:09 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/10/29 19:23:09 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/10/29 19:23:09 00000000 s (anticasc) anti cascading disabled
2018/10/29 19:23:09 58B3ACA3 c (client) plain dvbapi-client granted (dvbapiau, au=auto (6 reader))
2018/10/29 19:23:09 58B3ACA3 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv_emu/oscam.ccache
2018/10/29 19:23:09 58B3ACA3 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
 
P

Paracelso

Registered
Messages
9
Point of the situation.

1-installed a new image OPENATV 6.1
2-installed Oscam EMU oscam-1.20_svn-r11438 with reader
3-I uploaded via FTP from the Astra folder (Albertis)
4-I executed the command (ssh) opkg install astra-sm
5-reconfigured the astra.conf file in the box
6-I added with Dreamboxedit the bouquet albertis

canals albertis... just a black screen.

What am I doing wrong?
 
You must log in or register to reply here.
Top