Lastest Oscam for Coolstream HD1

oscam svn 7196

Changeset [7196]: always resend ecm request to udp reader on fallback

oscam-svn7201-arm-coolstream-webif-libusb-Distribution

Changeset [7201]: Fix for ORF 0D05 ATR Malformed since rev 7181



Changeset [7200]: revert non pll dirty timeout fix -> reported not working by StEVE^qSR

Changeset [7199]:Tryfix for PLL and Non PLL Readers producing after correct working 9-48 hours permanent timeouts with HD+ smartcards Fix according to PPC PLL testfix tested OK by FilipeAmadeuO Hope this fixes it for all readers, plz test and report in forum!

Changeset [7198]: loadbalancer: some fixes.

oscam-svn7205-arm-coolstream-webif-libusb-Distribution

oscam-svn7205-arm-coolstream-webif-libusb-Distribution


Changeset [7205]: Tryfix for HD+ Timeouts, plz test and report in forum!

Changeset [7204]
Fix for wrong protocol logging: T1, T14 or unknown protocol errors got always reported as T0 protocol command error

Changeset [7203]:
revert of the whole atr 90 00 check to signal end of ATR: too many cards use 90 00 as historical bytes in their ATR Tnx to Irata for pointing me on this fact!

oscam-svn7210-arm-coolstream-webif-libusb-Distribution and 7209 x 86

Changeset [7210]:
new option "block_same_ip" and "block_same_name" (default=1) block_same_ip: block ecms from clients to readers with same ip block_same_name: block ecms from clients to readers with same name
This is a simple way to block ring transmissions
debug: use debug level 1, output is like "ECMs origin <client> has same ip like reader <reader>, blocked!"


Changeset [7209]: fixed dvbapi compiler warnings fixed delayer


Changeset [7208]: fixed a emm-camd35 segfault

Changeset [7207]:
Tryfix timeout HD+ according to logfiles Fjorger supplied the resync request never gets resync response after that timeout forever

Changeset [7206]: fixed log output for timeout reader

add arm svn7209 x86

oscam-svn7211-arm-coolstream-webif-libusb-Distribution

Changeset [7211]: cacheex: group fix

oscam-svn7216-arm-coolstream

Rev. 7216

Trunk: New options "block_same_ip" and "block_same_name" (enabled by default) that block ECMs from clients to readers with same ip and name in order to avoid looping ECMs (can be debugged using level 1), group fixes and changes for cache exchange, fixed a segfault if srvid is large, fixed a segfault when deleting services via webinterface

OSCam v1.20.0 Revision 7218 vom 28.07.2012 (BETA)

Diese OSCam hat den Versionsstand 1.20 und ist nach wie vor als unstable anzusehen...

om Dank depp0n gibt es mal wieder einen Patch für die Coolstream-Version der OSCam om
Laut seiner Aussage sollten damit die EMM-Probleme im DVBAPI-Modus behoben sein und damit der DVBAPI-Modus nun zu 100% kompatible zur Cooli sein.

Changeset [7218]:
While adapting the oscam t1 implementation against towitoko t1 I missed a line of code -> corrected, but untested -> plz test and report!

OSCam v1.20.0 Revision 7228

Changeset [7228]: WebIf: Expose FILTERFORM for external templates.


Die Features dieser Version:
Web-Interface ist aktiviert
inklusive N*S-Fastmode fuer die V13, G02 und G09: zum aktivieren in die oscam.server "ins7e11 = 15" einfuegen

The features in this version:

Web-enabled interface
including *DS fast mode for the V13, G02 and G09: to enable the oscam.server "ins7e11 = 15" Insert

Diese OSCam hat den Versionsstand 1.20 und ist nach wie vor als unstable anzusehen...

Dank depp0n gibt es mal wieder einen Patch für die Coolstream-Version der OSCam .
Laut seiner Aussage sollten damit die EMM-Probleme im DVBAPI-Modus behoben sein und damit der DVBAPI-Modus nun zu 100% kompatible zur Cooli sein.

oscam-svn7229-arm-coolstream

Changeset [7229]:
oscam-config.c - correct saving of block_same_ip and block_same_name, default = 1 and should not be saved.

(Trunk: Correct saving of block_same_ip and block_same_name in oscam.conf)

oscam-svn7235-cool-webif-coolapi

Hier eine aktuelle Oscam Version für Unitymedia, Kabel BW & Kabel Deutschland.

Diese ist eine platzsparende Oscam Version, die nur Nagravision, Betacrypt (Irdeto) & *** VideoGuard beinhaltet. Als Protokol ist nur newcamd (Für Homesharing) vorhanden. Natürlich ist die DVBapi (Cool-API) mit dabei. Damit spart man knapp ~ 300Kbyte an Flash und Arbeitsspeicher.

Die Idee mit der aussparung ist, das man z.b. bei Unitymedia kein Conax/Cryptoworks/Bulcrypt uvm. braucht. Es funktioniert bei allen Kabelnetz bzw. Platformbetreiber, die Nagravision, Betacrypt tunneled Nagra & *** VideoGuard verwenden.

english traslate:

Here is a current version of Oscam Unitymedia, Kabel BW, Cable & Germany.

This is a space-saving Oscam version that includes only Nagravision Betacrypt (Irdeto) & *** VideoGuard. As is only newcamd protocol (for home sharing) available. Of course, the dvbapi (Cool API) with it. This saves nearly ~ 300Kbyte of Flash and RAM.

The idea of ​​the recess, is the one e.g. and much more at Unitymedia not Conax / Cryptoworks / BulCrypt. needs. It works with all cable network and platform operators, Nagravision, Nagra tunneled Betacrypt & *** VideoGuard use.


Changeset [7235]:
double check: added per-caid configuration option: [global] double_check_caid=caid1,caid2,...,caidn or double_check_caid=system1,system2,...,systemn where systemx are the first 2 bytes of the caid, for example 01,17,18


Changeset [7234] - fixed a possible segfault

Changeset [7233] WebIf: Fix for listing http_css files in config dir. Remove div around FAILBANNOTIFIER and CLIENTCOUNTNOTIFIER variables as they are unnecessary

Changeset [7232]: fixed some possible segfaults

Changeset [7231]:
Last tryfix for EAGAIN problem internal reader of ET-boxes If this doesnt work please ask clarketech to fix it!


Changeset [7230]:
Auto nagra ecm command filter after 5 ecm requests -> fixes cardlock HD+
Errorhandling code cardreaders improved
Protocol T1 Auto card restart after a failed T1 resync command
Reintroduced EINTR and EAGAIN response (fixes ppcold timeouts)

oscam-svn7237-arm-coolstream-webif-libusb-Distribution

Changeset [7237]: Added documentation for new parameter 'double_check_caid'.



Changeset [7236]: -
fixed a loadbalancer issue (too many fallbacks used)
loadbalancer with ecm format (debug output)

oscam-svn7239-arm-coolstream-webif-libusb-Distribution

Changeset 7239:

Do not log duplicated lines.
Instead of filling the log with duplicated lines, count them
and when unique line appears or 60 seconds of only duplicated
lines have passed inform the user how many duplicated log lines
were skipped.

Changeset [7238]:
cccam: Correct handling of Bulcrypt card serials.
Patch by chepik @ streamboard forum.

oscam-svn7245-arm-coolstream-webif-libusb-Distribution

Changeset [7245]:

webif: More CSS applied to span_notifier.

It seems that SPAN.span_notifier should be positioned in certain way. Fexes posted in ticket #2671 by docmarius.

Changeset [7244]: Small documentation update for 'reconnecttimeout' parameter.

oscam-svn7246-arm-coolstream-webif-libusb-Distribution

7246: Tryfix EAGAIN implementation -> tnx to PieterG from Openpli for explanation
Hope this works for ET-9200 owners out there.

OSCam v1.20.0 Revision 7246 vom 08.08.2012 (BETA):

OSCam v1.20.0 Revision 7246 vom 08.08.2012 (BETA):

Diese OSCam hat den Versionsstand 1.20 und ist nach wie vor als unstable anzusehen...

Dank depp0n gibt es mal wieder einen Patch für die Coolstream-Version der OSCam
Laut seiner Aussage sollten damit die EMM-Probleme im DVBAPI-Modus behoben sein und damit der DVBAPI-Modus nun zu 100% kompatible zur Cooli sein.



This version has the OSCam version 1.20 and is still regarded as unstable ...
depp0n Thanks once again there is a patch for the version of the Cool Stream OSCam.
According to him, so should the EMM problems dvbapi mode be be fixed, and thus the dvbapi mode now 100% compatible to Cooli.


The features in this version:
Web-enabled interface
including *** fast mode for the V13, G02 and G09: to enable the oscam.server "ins7e11 = 15" Insert

For the Cool Stream version is:

Dvbapi activated and fixed thanks depp0n: looking forward
Nagra cards like the HD + two cards working again with the latest drivers (cnxt_lnx.ko)
Fix for the V13 and V23 in the internal reader
for the V13, V23, and the G02/G09 cards of five ORF SRG must be the values ​​"cool_timeout_init" and / or "cool_timeout_after_init" can adapt, so the cards are addressed properly and quickly
the auto-overclock the OSCam is disabled



For the Dockstar version is:

libusb support is enabled, the Smargos work in native mode significantly better
LED status will be supported:
in oscam.conf must be supplemented to enable the following:

[global]
.
.
.
enableled = 1



The LED has the following functions:
OSCam starts: yellow
after the card Init: green
ECM: green from short
EMM: yellow briefly
OSCam completed: orange





For the NSLU2 version is:

libusb support is enabled, the Smargos work in native mode significantly better
LED status is supported (Thanks for the idea to Duke69):
in oscam.conf must be supplemented to enable the following:


[global]
.
.
.
enableled = 1



The LEDs have the following functions:

OSCam launches: Ready / Status LED red
green Ready / Status LED: cards after the Init
ECM: Disk1 LED short of
EMM: Disk2-LED briefly
OSCam finished: ready / status LED red

LCD support is enabled

oscam-svn7249-arm-coolstream-webif-libusb-Distribution

Changeset [7249]: lb: fixed lb_mode=2

Changeset [7248]:
lb: fixed statistic evolution see discussion: ​streamboard.de.vu/wbb2/addreply.php?threadid=34776

Changeset [7247]: fixed lb debug output

11/08/2012 OScam svn7250

-Changeset [7250] by theparasol
Improved functionality of irdeto cards CAID 0624, 0666 and 0648 patch by Black_ship

thanks Azo_Alex

oscam-svn7252-arm-coolstream-webif-libusb-Distribution

Changeset [7252]: lb_mode=2 another fix


Changeset [7251]: lb: antoher fix for lb_mode=2