Lastest Oscam for Coolstream HD1

E

elgeneral

Well Known Member
Messages
7,811
Oscam 0.99.4svn

Oscam 0.99.4svn (arm coolstream edition)

Code: 
oscam [-b] [-c config-dir]

-b : start in background
-c <dir> : read configuration from <dir>
default=


Leider wird der interne Reader der Cooli wieder nicht angesprochen.


2009/08/22 11:42:23 501 s **** OSCam << cardserver started
2009/08/22 11:42:23 501 s auth size=4732
2009/08/22 11:42:23 501 s services reloaded: 0 services freed, 3 services loaded
2009/08/22 11:42:23 501 s userdb reloaded: 0 accounts freed, 2 accounts loaded
2009/08/22 11:42:23 501 s signal handling initialized (type=sysv)
2009/08/22 11:42:23 501 s 2276 service-id's loaded
2009/08/22 11:42:23 501 s 22 lengths for caid guessing loaded
2009/08/22 11:42:23 501 s monitor: disabled
2009/08/22 11:42:23 501 s camd 3.3x: disabled
2009/08/22 11:42:23 501 s camd 3.5x: initialized (fd=5, port=15000)
2009/08/22 11:42:23 501 s cs378x: initialized (fd=6, port=15000)
2009/08/22 11:42:23 501 s newcamd: disabled
2009/08/22 11:42:23 501 s radegast: initialized (fd=7, port=60000)
2009/08/22 11:42:23 501 s resolver thread started
2009/08/22 11:42:23 501 s logger started (pid=503)
2009/08/22 11:42:23 501 s resolver started (pid=504, delay=30 sec)
2009/08/22 11:42:23 501 s reader started (pid=505, device=/dev/scm0)
2009/08/22 11:42:23 501 s anti cascading disabled
2009/08/22 11:42:23 505 r02 Cannot open device: /dev/scm0
2009/08/22 11:42:23 505 r02 exit with signal 1
2009/08/22 11:42:23 501 s PANIC: reader lost !! (pid=505)
2009/08/22 11:42:23 501 s exit with signal 1
2009/08/22 11:42:23 501 s cardserver down
/ $ 2009/08/22 11:42:23 501 s **** OSCam << cardserver started
> 2009/08/22 11:42:23 501 s auth size=4732
> 2009/08/22 11:42:23 501 s services reloaded: 0 services freed, 3 services loaded
> 2009/08/22 11:42:23 501 s userdb reloaded: 0 accounts freed, 2 accounts loaded
> 2009/08/22 11:42:23 501 s signal handling initialized (type=sysv)
> 2009/08/22 11:42:23 501 s 2276 service-id's loaded

> 2009/08/22 11:42:23 501 s 22 lengths for caid guessing loaded
> 2009/08/22 11:42:23 501 s monitor: disabled
> 2009/08/22 11:42:23 501 s camd 3.3x: disabled
> 2009/08/22 11:42:23 501 s camd 3.5x: initialized (fd=5, port=15000)
> 2009/08/22 11:42:23 501 s cs378x: initialized (fd=6, port=15000)
> 2009/08/22 11:42:23 501 s newcamd: disabled
> 2009/08/22 11:42:23 501 s radegast: initialized (fd=7, port=60000)
> 2009/08/22 11:42:23 501 s resolver thread started
> 2009/08/22 11:42:23 501 s logger started (pid=503)
> 2009/08/22 11:42:23 501 s resolver started (pid=504, delay=30 sec)
> 2009/08/22 11:42:23 501 s reader started (pid=505, device=/dev/scm0)
> 2009/08/22 11:42:23 501 s anti cascading disabled
> 2009/08/22 11:42:23 505 r02 Cannot open device: /dev/scm0
> 2009/08/22 11:42:23 505 r02 exit with signal 1
> 2009/08/22 11:42:23 501 s PANIC: reader lost !! (pid=505)
> 2009/08/22 11:42:23 501 s exit with signal 1
> 2009/08/22 11:42:23 501 s cardserver down

Thanks Cool
 
juli13

juli13

Staff member
Administrator
Messages
10,232
Oscam 0.99.465 for Coolstream HD1


What's new:

-Rev 465 of 0.99.4 compiled with module *** for Sky Germany and module Videoguard2 for Sky Italy 093b and 0919
 
I

iomeali

Well Known Member
Messages
3,962
oscam-0.99.4.472svn-arm-tuxbox-linux

oscam-0.99.4.472svn-arm-tuxbox-linux

last version from Streamboard.
for Coolstream HD1 with Neutrino
 
E

elgeneral

Well Known Member
Messages
7,811
Lasted OsCam for CoolStream

oscam-0.99.4.477 svn-arm

  • Improved logging on ecm, dcw and dcw checksum
  • Fix serial comm parameters for Tuxbox devices

:thum:
 
juli13

juli13

Staff member
Administrator
Messages
10,232
03.11.2009
Code: 
with respect to the internal reader allerings there are no new features. Without the support of the CoolStream developers probably will do as long as nothing as long as the sources are not public.
 
E

elgeneral

Well Known Member
Messages
7,811
OSCam v0.99.4 R-507 for CoolStream HD1

OSCam v0.99.4 Revision 507

15.11.2009

Changes:
- Fix Drecrypt 2 EMM (new Platforma card 0x14) + cleanup code
- Updated documentation section betatunnel
- Improve zapping speed Videoguard2/***
- new feature: auto AU in oscam.user
- fix for details request on monitoring port
- Improve Seca3 logging for new EMM 0x83
- Update makefile for fritzbox mipsel-uclibc929

:thum:
 
juli13

juli13

Staff member
Administrator
Messages
10,232
OSCam v0.99.4 Revision 509 vom 15.11.2009:

Changes:
- Disable reader-***.c and enable reader-videoguard2.c for unknown *** cards
- Add correction mechanism when EmmCache? configured wrong
 
juli13

juli13

Staff member
Administrator
Messages
10,232
OSCam v0.99.4 Revision 511 vom 17.11.2009:

Changes:
- Support for 8 mhz readers
- *** error on CW2 corrected
 
E

elgeneral

Well Known Member
Messages
7,811
Lasted Oscam for CoolStream HD1

OSCam v0.99.4 Revision 522 vom 20.11.2009:

Changes:
- Postprocessing for ***/videoguard2 cards
- Fix postprocessing ***/videoguard2
- Fix ***/Videoguard2 reported to work on Sky Italy
- Fix crash after receiving Seca EMM 0x83
- Fix Sky Italy little-endian problem
- bugfix: auto AU does not work with smartreader and camd3
- reader-dre.c : add casting to make it compile on OS X
 
E

elgeneral

Well Known Member
Messages
7,811
OSCam v0.99.4 Revision 530 CoolStream HD1

OSCam v0.99.4 Revision 530

21.11.2009:

Changes:
- 523: fix for readers on the sh4 plattform
- 524: Comment debug messages
- 525: another fix for readers on the sh4 plattform
- 526: Fix: Rev 523 broke code for non-SH4 platforms
- 527: If videoguard2 card gives cw2, send it to client
- 528: removed bugfixes for readers on the sh4 plattform due many problems
- 529: Videoguard2: disables postprocessing when cw = 0
- 530: updated documentation: customspeed

:thum:
 
tani1

tani1

Staff member
Super Moderator
Messages
17,767
OSCam v0.99.4 Revision 534 vom 22.11.2009:

Changes:
- 531: Header file wasn't updated, causing problems at compile time.
- 532: Merge drecrypt stuff in the Merlin branch. This should merge the commits …
- 533: Cleaning up videoguard2 0cw code
- 534: Fix videoguard2 now 'not found' when channel not subscribed
 
juli13

juli13

Staff member
Administrator
Messages
10,232
oscam-0.99.4.542

Changes:
- 535: add some sh4 support
- 536: final sh4 updates
- 537: Remove reader-***, reader-videoguard2 handles *** cards
- 538: And file delete reader-***.c follows
- 539: documentation update: reader internal/intern are equal
- 540: -O3 is reported to give strange behaviour on Ubuntu 8.04 / VIA C7 CPU / VIA EPIA motherboard
- 541: removed german reader setting 'intern'
- 542: Add Viasat Scandinavia ATR to the list of supported ATR
 
You must log in or register to reply here.
Top